If you decide that gas will serve as fuel for your fireplace, then let's get to know each other closer. Since today gas fireplaces are a multifunctional and high-tech heating system. A gas fireplace for the home is chosen by the owners in order to create a warm and cozy atmosphere in it. The main decision that the owners need to make when choosing a fireplace is to decide on the functionality of the presented models for future use. Those who prefer gas structures usually choose options with a high level of autonomy and aesthetics when arranging a home. In addition, this model provides the lowest cost heat generation for heating services.
Gas fireplaces, their advantages and disadvantages
In order for the fireplace to delight you with cozy warmth on long cold evenings, it should be properly cared for. This means that you need to constantly monitor the combustion process, the moment of cleaning the furnace, etc.
Anyone who owns such a structure understands that its installation requires a considerable investment of effort and money. In addition, the development of the project and the installation requires, first of all, coordination with the relevant authorities, and in terms of a country house there should already be a prerequisite for arranging such a structure.
However, there is a simple solution to this problem. You can buy a good model of a gas fireplace and install it in your home.
They do not require special care, are easy to operate and do not litter (with ash, wood, soot) the room. Apart from decorative models, gas ones can be used as ordinary heating appliances.
A gas fireplace is a heater with a living flame effect that uses natural gas (methane) or liquefied gas as fuel.
It makes sense to install the gas unit in apartments and country houses, to which the main gas is supplied.
Although it is possible to organize its operation on gas in cylinders. But in this case, you will need to equip a special room for storing containers with gas, and the cylinders will have to be refueled from time to time (which is not very convenient). The combustion temperature of gas (500-650 ° C) is significantly lower than that of firewood.
Therefore, the requirements for the heat resistance of the materials from which the fireplace is made are different. In addition, when burning gas fuel, very little soot is formed - basically, it breaks down into carbon dioxide and water vapor.
Benefits:
- Much more environmentally friendly than wood-burning fireplaces, less hazardous substances enter the atmosphere.
- Gas fireplaces are cheaper than wood-burning ones, and they are much simpler in design.
Fuel dosing is fully regulated by an automatic system, both electronic and mechanical. This means that, regardless of the degree of modernity of the model, a gas fireplace in an apartment does not require constant adjustments and interventions during operation.
- Live fire as in a wood-burning one, but without ash and soot.
- The heating power of gas fireplaces can be up to 8 kW.
Gas has a high specific heat of combustion, which explains the level of efficiency, which is incomparably higher than that of wood. In our case, it can exceed the 80% mark.
- It is easy to operate, it ignites quickly and does not require constant maintenance (throw up firewood, adjust the draft, you can leave it unattended).
Disadvantages:
- To install a gas fireplace, you need permission from the relevant services (gas and fire).
- The gas fireplace should ONLY be installed by a specialist. Its first launch is accompanied by permits from the gas and fire service. The owner, on his own initiative, cannot make any changes to the design and to its operation.
- Hazardous propane-butane or natural gas is used as fuel, so a fireplace with a safety violation or malfunction can cause trouble.
Fireplaces are equipped with a chimney that acts as a chimney. If it is located far from the built-in ventilation duct, then a lot of work has to be done, deliberately agreed with the fire inspector.
Modern fireplaces are automated by electronic control systems, which means they require energy costs. They are small, but the installation of a fireplace implies the installation of an outlet in the immediate vicinity, which increases the total amount of work.
A gas fireplace can have an open or closed firebox - equipped with a heat-resistant glass door.
The unit with an open hearth resembles a fireplace using solid fuel. You can light it with matches without much difficulty, but there is also a danger of being burned by its flame.
The glass door covering the front of the firebox plays a double role: it protects the burner from contamination and the users from possible burns due to careless handling.
Heat-resistant glass is used in gas fireplaces with a closed combustion chamber.
Gas is a flammable substance, but, despite this, gas fireplaces are considered one of the safest devices. Thanks to the multi-level tracking system, any abnormal situations will be prevented.
Infrared sensors are fireplace position sensors. They react if the device is suddenly dropped. In order not to cause a fire, the gas supply system is turned off.
A gas fireplace is a rather powerful source of heat, so this unit can be used to heat large areas of your home.
Gas fireplaces put forward lower requirements for the hood compared to wood-burning ones, which need a full-fledged chimney.
After all, the combustion products of natural gas are steam and carbon dioxide, and the temperature of the exhaust gases at the outlet is much lower. It also increases the attractiveness of the gas fireplace in the eyes of the modern consumer.
However, at the same time, you must understand that the connection of the gas appliance is associated with additional work that must be carried out by specialized services. Also, this procedure requires documentation in accordance with local legislation. For many reasons, the installation site of gas equipment is limited by safety requirements.
The variety of models of gas inserts and fireplaces will allow you to implement any idea for the implementation of a modern comfortable fireplace in your home.
You can install a fireplace in one of the existing ways:
- Outdoor way. This arrangement implies the installation of the firebox on the floor covering.
- Wall-mounted method. The firebox is hung on the wall and has a completely closed design with ventilation channels.
- Embedded way. The firebox is placed on an equipped base and covered with decorative elements.
- Street. The structure is installed outdoors, in a summer kitchen or gazebo.
Security
Gas is a flammable substance, but, despite this, gas fireplaces are considered one of the safest devices. Thanks to the multi-level tracking system, any abnormal situations will be prevented.
From the movies, we know of cases when the gas supply stops, and then resumes, then the room will be filled with a poisonous substance. Of course, you need to remember this danger, but not in the case of a fireplace. The gas dosing system is equipped with a special pressure sensor.It reacts to a drop in line pressure and shuts off the supply in the event of a mismatch.
The content of carbon dioxide in the room is constantly monitored by special atmospheric sensors-analyzers. They have saved many lives in cases where the hood was not working correctly.
Infrared sensors are fireplace position sensors. They react if the device is suddenly dropped. In order not to cause a fire, the gas supply system is turned off.
Small mobile unit
Features of gas fireplaces
Gas fireplace equipment includes the following structural elements:
- Fireplace insert that decorates the room.
- Body made of cast iron or special metal alloy.
- High capacity burner from which gas is supplied.
According to fire safety rules, such a device must have a high-quality refractory lining, which, in addition, performs a decorative function.
There are fireboxes of various sizes and appearance, i.e. design, so everyone will be able to choose the most suitable option for the interior style of the firebox for a gas fireplace.
To comply with fire safety measures, so that the air circulation in the fireplace is not disturbed, the firebox must be lined. The cladding can be made of ceramics, artificial and natural stone or ceramic tiles, but the cladding material must necessarily have refractory properties.
Inside the combustion chamber there is a firebox, always lined with fireclay bricks, a gas burner, a reflector and a protective screen. All these elements are hidden behind artificial logs.
On the reflective screen, the fuel burns, which comes out of the burner onto it. Such a screen consists of special frames that warm up quickly enough and give off heat.
The reflector, in turn, helps to accelerate the heat transfer process. The radiator in the fireplace gives off heat to the room by convection of hot air. The power depends on the number of radiator sections.
The gas fireplace burner is decorated with refractory ceramic dummies. They create the impression that wood or coal is burning in the fireplace, and the flame is knocked out between the logs.
The body of the fireplace is usually cast iron, with possible finishing with stone, ceramics, metal, tempered glass.
The upper part forms a gas collector to which the chimney is connected. A ribbed radiator is installed on the gas collector - the main heating element.
The heat exchange is so efficient that the heat loss is only 15%. And for fireplaces with solid fuel - 50 - 70%.
The efficiency of a gas fireplace is achieved due to the optimal combustion mode, and a special design of the body, which allows you to give maximum heat from the gases to the air in the room.
Chimneys for gas fireplaces are made of special stainless steel, as the result of combustion is a lot of water vapor saturated with acids.
Chimneys are fenced with heat-insulating material that is resistant to heating and oxidation, which prevents condensation of water right in their lower part.
The upper part of the fireplace is a flue gas collector, which passes through the flue duct into the chimney itself. The smoke collector has the shape of an accordion, which increases the heat transfer of the gas fireplace.
The chimney of the fireplace is designed to create draft and remove combustion products outside the room. In the process of gas combustion, carbon dioxide and water vapor are released, which adversely affect the chimney. For this reason, it is made of a heat-resistant material that also has a water-repellent property, most often steel is used for this.
The power of gas fireplaces is usually in the range of 7-12 kW, which is quite a lot, enough to heat the "floor of the house". At the same time, fuel consumption in heating mode can reach 500 grams per hour.And in the simulated flame mode - 180 grams per hour, which is comparable to the consumption of a gas stove burner.
The gas device is controlled by a microprocessor. The fireplace is supplied with temperature sensors, so you can set the room to warm up to a certain temperature. Other sensors control the draft, gas flow and pressure, optimal combustion, etc. In case of violations, the fireplace will be turned off, the safety of this household appliance is guaranteed by the manufacturer.
Gas fireplaces are produced both for main gas and for liquefied propane in cylinders, and this is an option for a remote summer cottage.
In any case, the gas unit is connected by the master of the gas service, according to the gas supply project, for which the relevant documents are issued.
But before purchasing and installing a fireplace, you need to obtain permission to install it. For a house and a summer residence it is easier, but for an apartment it is problematic.
Design features
Gas fireplaces for heating have a portal and a rectangular burner made from cast iron. For fixing in the portal, it has several holes on one side. On the second side, there are also openings for air intake.
For the manufacture of the burner body, porous-type ceramics are used, which contributes to the distribution of the incoming gas and the formation of a flame strip.
These burners can be controlled in two ways:
- manual;
- automatic.
Gas fireplaces for apartments and houses consist of:
- A firebox with narrowed sides, which improves heat transfer. This part of the fireplace can be made of cast iron, glass, steel alloy. The main requirement for it is a high degree of heat resistance.
- Smoke collector. It features a funnel-shaped inverted shape. It is intended for collection of fuel combustion products and their subsequent discharge into the chimney. Located directly above the firebox.
- Chimney. This part of the fireplace is responsible for the draft, thanks to which the combustion products are removed. Its main feature is tightness, it must be moisture and heat resistant. The chimney has two walls, between which there is a heat-insulating layer, the minimum thickness of which is 15 centimeters.
- Portal. It represents the external design of the structure, its design should correspond to the situation in the room. The portal serves as protection against open flames and serves to dissipate heat.
Gas fireplace safety
Modern gas fireplaces are equipped with several automatic security systems at once:
- Gas pressure check.
The gas supply system provides and maintains a constant pressure, and a built-in sensor controls the process, and in case of any irregularities, it automatically stops the gas supply.
- Air analyzers.
Another sensor is atmospheric. They constantly check the condition of the air in the room, determining the level of carbon dioxide generated during combustion, and in case of exceeding the norm, they automatically issue a command to turn off the gas supply.
- Infrared sensors.
Their task is to monitor the position of the fireplace. If, for some reason, it topples over unexpectedly, infrared sensors will detect this and instantly stop the fireplace.
Device device
Various manufacturers provide a choice of numerous options for the execution of gas fireplaces. But if you understand their structure, you can single out single key nodes that perform strictly defined functions.
Suspended version of the fireplace system
- The combustion of gas takes place in the firebox. It is she who determines the type of fireplace and can be open or closed.
- The flue gas collector concentrates the combustion products before they enter the chimney. Its purpose is that carbon monoxide gases evaporate without loss and do not remain in the room.
- Do not forget that the main purpose of such a fireplace is heating, so the heat exchanger is an obligatory part. With the help of it, heat is released from an increased area.
- The gas supply to the immediate place of its combustion is provided by a gas burner.
- Fake firewood.
- Flame control system.
In this configuration, it is easy to imagine the principle of the fireplace. After switching on, which is carried out from the control panel, gas supply begins. Simultaneously with this, automatic ignition occurs, which works thanks to the piezoelectric effect. Temperature sensors send a signal to the controller and "monitor" the air condition in the room. When a certain temperature is reached, the gas flow is reduced and the intensity of the flame decreases.
A gas fireplace without a chimney, despite its obvious advantages, is associated with additional work. In its natural form, it can only be used outdoors, for example, in the country. Working indoors, he still needs to remove the combustion products.
Recreation area in the space of the apartment
The fireplace has earned its name with the advantage that it is not necessary to mount the chimney, to observe its height to ensure the required draft. The burnt gases are discharged through a special pipe through the wall to the street. It is also possible to equip an apartment with such a fireplace, but only for this, permission is also required from the management company.
Good to know: Permits for the installation of a real fireplace in an apartment
Gas fireplaces without chimney
The principle of operation of chimney-type fireplaces consists in complete combustion of fuel, which leads to the absence of combustion products.
They are used as decorative elements and are made in several modifications:
- Floor-standing fireplaces for home on gas without a chimney - they look like an ordinary island fireplace.
A small gas cylinder is installed inside the body, the capacity of which is sufficient for full-fledged work for several hours.
Floor-standing models are often equipped with casters or can simply be carried to any convenient place. A convenient option, since it does not require special tweaks during installation and can be used even outdoors, on verandas and in cafes.
- Hanging and built-in fireplaces. Easy to install outdoors, creating a cozy and comfortable atmosphere.
Installation of stationary embedded devices is more difficult, but the result is more aesthetic. The front panel of the fireplace is flush with the wall, the device does not hide the space of the room. In the wall, you can "hide" and gas supply communications. In addition, such a fireplace can be used to decorate a wall, then the flame can be observed from two or even three sides.
The models are completely safe, no toxic combustion products are emitted during combustion. To install a smokeless fireplace, there is no need to obtain permits. For full operation, before turning on the device, you should ventilate the room.
Advantages of gas fireplaces without a chimney
When choosing, most buyers are guided by the ratio of positive and negative properties of heating equipment.
By comparing the pros and cons, they make certain choices and make a purchase.
Gas fireplaces for an apartment without a chimney have a number of distinctive features:
- Fast ignition.
While it takes a long time to effectively ignite wood or coal, the gaseous mixture ignites immediately, and within a few minutes you will feel the temperature rise in the room.
- Additional properties.
Many models are supplemented with devices that simplify the operation process. For example, a thermostat can control the level of heat generated in order to improve fuel efficiency.
- Simplified operation.
Installation requires a minimum of effort and time, you do not have to constantly carry logs, chop wood and look for coal.
- Environmental Safety.
Gas-powered structures emit a minimum of pollutants into the atmosphere. An alternative option is to use biogas from waste processing - when burned, it emits significantly less carbon dioxide.
The nuances of installing equipment on bottled gas
When assembling the unit, you need to know:
- When laying a gas pipe, it is placed on the surface of the wall.
- To prevent gas leakage, make sure that the pipes are correctly joined.
- The fireplace is installed only in a ventilated area.
- The firebox must not be placed in a draft.
- When the fireplace has an open combustion chamber, flammable objects should not be placed close to it.
- A flue duct is required for the unit to function.
- The best option for a chimney design is a stainless steel pipe, which is wrapped in non-combustible thermal insulation.
- For finishing the unit, use natural or artificial stone, bricks or ceramic tiles.
Gas fireplaces on the cylinder
When installing, the first step is to decide on the location of the fireplace, make a markup of exactly where the structure will be located, and only then get down to business.
And although gas cylinder fireplaces are modern safe designs, precautions must be observed.
There are certain rules for installing a gas fireplace that must be strictly followed.
Remember that neglecting these rules, you risk the health of not only your own, but also your relatives. After all, through negligence and negligence, a fire, explosion, or damage to equipment can occur.
Fundamental rules:
- Gas fireplace, the stove should be mounted exclusively on a stable, level surface. Such a surface must necessarily be made of refractory materials or can be faced with refractory tiles.
- Structural floors must be able to support the weight of the fireplace. The bearing capacity of concrete slabs is 750 kg / m2, for wooden floors - no more than 300 kg / m2. If the bearing capacity is less than the mass of the heating device, then it should be distributed over the entire surface, increasing the support area.
- Move all flammable furniture and structures away from the heating surface of the fireplace to a safe distance. As a rule, this is indicated in the passport of the device.
If the wall is not insulated, a distance of 60 cm is considered safe, for a ceiling - 130 cm. If you need to shorten this distance for some reason, this can be done using sheet steel cladding.
A sheet of steel is laid on top of a layer of mineral or basalt wool or asbestos, the thickness of which must be at least 8 mm. It is worth noting that the asbestos material itself is not environmentally friendly, and for this reason it is not desirable to use it in residential premises.
- The gas main is supplied through metal pipes, as well as special gas fittings. This type of work must be entrusted to specialists. Only gas cylinders are allowed to be connected by yourself, but if you are not confident in your abilities, do not risk it, invite the master.
- Cylinder gas fireplaces without a chimney may not be used.
The flue for exhausting recycled gases must be made of resistant materials. Ceramic and stainless steel chimneys are suitable, they will be resistant to acids.
Mostly they buy stainless steel sandwich chimneys, which have high corrosion resistance and good thermal insulation. Prefabricated ceramic chimneys are also reliable, but they are more expensive.
In addition, you can use a coaxial chimney with a built-in recuperator and an air duct.
- In order for the combustion efficiency to be high, air must enter the furnace without obstacles.The intake can occur both from the room through the air ducts, and through special air channels in the chimney system.
- Make sure that the room with the fireplace is always ventilated. Models of fireplaces with an open type of insert should be placed in such a way that the flame is not directly exposed to air.
- When installing the built-in type of firebox in the casing, make channels in it in advance so that the air can freely circulate both in the upper and lower parts of it. The convection flow must pass freely between the casing and the heating chamber, and at the same time could remove heat from its walls.
The place of a gas fireplace in the interior of the apartment and other premises
If the fireplace is designed to be installed on gas with an open hearth, it should not be placed in a place where there is movement of air flows. For example, drafts interfere with the combustion of the gas in the burner.
Such fireplaces are considered an excellent solution for premises for various purposes, therefore they are installed in:
- apartments;
- private households;
- summer cottages;
- hotels;
- office space;
- restaurants, etc.
The best option for installing a gas fireplace is real estate that is connected to the central gas mains.
The presence of various forms of heating units, among which there are rectangular, round and non-standard options, allows you to make a choice in accordance with the parameters of the premises, and at an affordable cost.
Criterias of choice
First of all, they pay attention to the type of fuel when it is decided to purchase a comfortable fireplace for a house or apartment. This parameter is very important. Versions on main gas are marked with "N", and those that are designed to work with cylinders filled with propane-butane - "P".
Then they are determined with the appointment. A fireplace may be required to heat a room or simply as a decorative element. All gas fireplaces usually combine both functions, but the appropriate power must be selected for heating. It is not so important if the fireplace will simply decorate the interior - here they are more focused on fuel consumption and the appearance of the device.
Thermal power is measured in kW, calculated by the volume or area of the room. Manufacturers always indicate the maximum area, but you need to understand that this calculation was created for an initially insulated room. Usually one kW of power is required for ten square meters.
When buying fireplaces operating from a cylinder, the gas consumption parameter will be important. At the time of purchase, you need to study this data in the characteristics of the model. The flow rate is usually indicated at the maximum heating mode, but if the hearth burns more often in decorative mode, then this parameter will be significantly lower.
Fireplaces differ in the type of installation. Floor-standing models are popular - they are simply installed on the base, then connected to the chimney. Wall mounted are fixed to the wall with brackets. Such options are preferable if there are children and pets at home. For built-in models, you will need a ready-made portal made of non-combustible materials and a chimney. Open fireboxes can be installed in the recreation area, since they do not need a chimney.
Shape and material
The shape of the firebox is important if it is required to harmoniously place it in a certain interior. It can be very diverse:
- frontal for placement against walls;
- corner;
- island for the center of the room with a good view;
- double-sided through for installation in interzone partitions.
Of course, the choice of form depends on the taste of the buyer, but it is important to consider the connection of the chimney with gas lines. In a country house, the chimney can be led out through walls, ceilings, so the type of installation is not so important here. But in the case of an apartment, it is better to choose corner or frontal options, which are placed close to the outer wall of the building. The gas supply pipe must not be laid hidden in the walls.There must be free access so that the pipe can be inspected at all times.
When the gas burns, water vapor, sulfur compounds, carbon dioxide will be formed. If the hearth is made of ordinary steel, then the material will quickly collapse under such conditions. Cast iron options are the most reliable. But they always have a higher price, in addition, they weigh a lot. Most preferred is acid resistant stainless steel. It has a long service life and a high price.
Additional functions
Almost all models are now produced with the functions necessary for convenient operation - electric ignition, gas control, tipping control, automatic adjustment of combustion modes. The presence of these options will affect the cost of the fireplace insert. If the budget is modest, then it is better to choose only the most necessary functions that will ensure the safety of use. After all, users do not even use most of the options or do it very rarely.
A fireplace like this can have a ton of functions.
For many buyers, the remote control for the purchased device is also an important factor. They are now going to many modern models. With their help, you can easily change the various available functions, turn on or off the device without going to it.
Outdoor fireplace-table: an overview of burners with a photo
Sections of the article will prompt:
- which burner to choose - wood, gas or biofuel;
- what design of an outdoor fireplace is suitable for each of them;
- where to arrange and how to arrange a summer fireplace area.
Garden fireplace and wood burning hearth
A wood-burning outdoor fireplace is good for a country house or summer cottage with a large garden. It guarantees perfect order: in the spring, excess branches burn in the fire bowl, and in the fall, the foliage that has been harvested.
A garden fireplace or a table in the form of a campfire bowl is suitable for a private home
It is convenient to burn cut branches and fallen leaves on an elegant forged stand with a lid. The lawn will remain green, and ash and coals will not scatter around.
Hand-forged outdoor fireplaces are created for classic mansions. They are effectively combined with wrought iron fences. It is not worth placing a fireplace at the entrance to the house to avoid smoke and burning.
BBQ fireplace: wood or gas?
The modern cottage will be complemented by a concrete bonfire bowl, as in the left photo below. You can do it yourself by pouring cement mortar into the mold. But such a hearth is not designed for comfortable feasts.
An open wood burning fireplace requires greater safety distances than a gas fireplace
The sofa and the fireplace on the left are separated by 2 m of free space. Chairs for fondue lovers can be moved to the table in the right picture.
Connoisseurs and gourmets alike will appreciate the gas BBQ fireplace as pictured on the right. A door is hidden in the support, and behind it is a cylinder, which can be easily refueled at the nearest gas station.
Gas fireplace for gazebo and terrace
A gas fireplace-table is the best friend of spontaneous gatherings. It will light up your veranda warmly and quickly heat up your snacks. The guests' clothes will not smell of smoke, and the hospitable hosts will not have to clean up the ashes.
It is easy to beat a gas fireplace-table in the interior of an open veranda
Wicker chairs to match the countertop or support will help create a cozy corner. Soft colored pillows and decorative ceramic stones for the burner will add color.
Round options are more welcoming than square ones. The model in the photo will comfortably accept a couple more latecomers. Two additional chairs will press the circle, but no one will be "on the corner".
Exclusive gas fireplace
The serial models consist of a steel support and an inexpensive artificial stone countertop. Replacing it with a plate of marble or granite, you can get a real exclusive.
A gas fireplace-table for an elite summer residence is decorated with a granite countertop
The flames are effectively reflected in the polished mottled surface. Its colors echo the brown stone facade of the house and the brick-red tiles of the walkway.
You can also change the design of the table to order.Feng Shui fans will appreciate the unusual octagonal countertops. Lovers of change will add castors to the support for quick and convenient rearrangement.
Biofireplace-table: not only for the street
All gas appliances are distinguished by their solid appearance, size and weight. You cannot put them on their legs: a large support is needed for the cylinder. Biofireplaces-tables do not need it.
Modern biofireplaces-tables can be left outside and kindled indoors
They will easily support graceful shapes and transparent materials. Compact glass and steel models will decorate a balcony, loggia, terrace or outdoor cafe.
The biofireplace burner runs on biofuel. Eco-friendly alcohol composition burns without smoke, soot and odor. Therefore, permission for a biofireplace table in an apartment or public place is not required.
Diy table with biofireplace
To make your own version, it is enough to insert the burner into the heat-resistant niche cut in the finished worktop. The universal material for her is stone: natural or artificial.
The location of the burner and the shape of the biofireplace-table depend on the interior
A rectangular or square table top complements a corner sofa. The firebox in the corner will maximize the work surface for a laptop or a summer kitchen.
We safely leave glass, stone and metal models in the open air: they are not afraid of the vagaries of the weather. Choosing a biofireplace-table for a gazebo or an area under a canopy, it makes sense to save on materials.
Biofireplace table and exclusive design
If your choice is a portable biofireplace table, a stone countertop and steel legs will inexpensively replace wood. It will be protected from rain by a tinted oil impregnation and a stretched awning.
A portable biofireplace-table hides under the roof in the summer and moves into the house in the fall
An inexpensive option from a Russian factory awaits in the online store. The ZeFire brand offers a series of 10 models that are easy to change to your liking.
Creating an exclusive design with a bio fireplace is fun and easy. The factory collection makes the process as easy as possible: it resembles a constructor made of modern burners, legs and countertops.
Read more about the fireplaces-tables in the articles:
"ZeFire Design: coffee tables with a biofireplace" and "ZeFire Design: dining tables with a biofireplace" - will show the collection of the Russian brand, replacement options and differences in finished models.
"Dining tables with a biofireplace: we choose and design ourselves" - useful for those who create "from scratch". It will help to correctly calculate the dimensions, select the shape of the table top and burner.
Successful projects and warm feasts!
The most interesting models
Consider gas fireplaces for an apartment or private house. The review will present models from different price categories. When installing an apartment, it is necessary to consider the installation of the chimney.
Gas fireplace Faber Fyn 450
Before us is an extremely compact gas-fired fireplace. It is designed to be built into the wall, the combustion products are discharged through a coaxial chimney with a diameter of 100 mm. A power of 3.2 kW will provide a substantial amount of heat to the living quarters. The unit is only 283 mm deep, it will fit in a small niche - most likely, a false chimney will have to be completed, since the walls in the apartments are quite thin. The set comes with a remote control. The estimated cost of the model is 155-160 thousand rubles.
Floor fireplace Faber The BUZZ
A typical gas fireplace for a summer residence, from where it can be taken away if necessary. For this, it is made in a transportable form factor. At the first glance at it, associations arise with a mobile apparatus for making popcorn in outdoor conditions - the same massive base and a firebox open on three sides (covered with glass).
Inside the fireplace, we see an imitation of wood-burning masonry, it is necessary to achieve maximum similarity with wood-burning fireplaces. The power of the unit is 9.3 kW, power is supplied from the cylinder.The intensity of combustion of the flame is regulated at the discretion of the users. An undoubted advantage will be the presence of a "clean glass" system - the device is not afraid of soot. The total weight of the stove is about 51 kg, the cost is 124 thousand rubles.
Floor-standing fireplace Faber Tube
Gas fireplaces for a country house with good finishes should be beautiful and attractive. That is why we included this model in our review. It is made in a slender vertical casing with a height of 144.8 cm. The thermal power is 6.5 kW, the function of regulating the flame level is provided. A feature of the model is its small thickness - being installed against a wall, it will not take up much space and will not clutter up the space. The approximate cost is 185 thousand rubles.
Napoleon GD 33
Solid gas fireplace with bottled gas with a shallow body depth - only 330 mm. The height is 750 mm - the firebox is quite large. The location is wall-mounted, it is possible to supplement the model with a portal of any type, including a brick one. Food - under a bottle of liquefied gas, there is a fuel supply control system on board. Special attention should be paid to the firebox:
- Impressive dimensions - before us is a full-fledged fireplace, pleasing with a wide flame.
- Realistic wood-burning masonry - your guests will not leave the feeling that natural firewood is burning in the firebox.
- Ease of installation in apartments and private households - modifications are provided with an upper or rear outlet for a chimney.
The approximate price is about 175 thousand rubles.
Napoleon Victorian 1061
The fireplace can be installed not only in the house, but also outside it - for example, in the backyard, on the sitting area, patio or terrace. We suggest that you familiarize yourself with the model for street installation. If desired, you can put an extractor hood above it by mounting a fireplace right in the middle of the room. The body is made of steel and die-cast aluminum, it contains an 11.7 kW burner made of stainless steel. A small gas cylinder is hidden inside the base.
Features of the model:
- Built-in protection against gas leakage in case of flame extinguishment.
- Complete glass screen for wind protection.
- Dimensions - 107x107x63.5 cm.
The cost of a gas fireplace is about 90 thousand rubles.
Faber Duet PR L
Before us is a rather interesting built-in gas fireplace with a closed firebox. It connects to a coaxial chimney that leads out to the street outside the nearest wall. The heat transfer is 7.1 kW, the gas is ignited using an electronic fuse. The intensity of combustion can be adjusted by the remote control. The firebox is made of corrosion-resistant stainless steel.
This fireplace is equipped with a gas burner with support for several combustion modes - with a uniform distribution of flame, with a concentration of fire in the central part, with regulation of the intensity of combustion. The firebox itself is decorated with imitation firewood or Carrara pebbles - these are non-combustible materials, so the safety of the product does not suffer. The model is 1074 mm wide, 738 mm high and 474 mm deep. Operation with natural or liquefied gas is possible.
Karma Beta 2
The most affordable model in our review, you can buy it quite inexpensively - only 42 thousand rubles. We assure you that this is a completely adequate price, the overwhelming number of gas fireplaces is significantly more expensive. The device is made in a compact body - dimensions are 416x600x215 mm and weighs 15 kg. Installation is carried out on the wall, propane or butane is used as power supply. The efficiency is 94%, the thermal power is 2 kW. The body is made of metal, the front part of the firebox is covered with glass.
The gas fireplace is connected to a coaxial chimney, taking in combustion air from the outside. The flame is low, the observation window is very small. We can say that this device is designed more for heating rooms than for performing decorative functions - it does not shine with an interesting look, more reminiscent of a convector bloated in size in its design.
Dignity
Often, when choosing serious equipment for the house, people are guided by the positive and negative properties of the unit. And even in the presence of a large number of unwanted moments, one plus may outweigh in favor of the purchase.Therefore, sellers are often asked how this device differs from the rest. Below are the main points that outweigh the choice in favor of this open hearth, operating on gas:
- Unlike a wood-burning fireplace, a gas analogue is kindled quickly due to the remote control. In this case, there is no need to prepare firewood or to heat the device for a long time.
- If, in addition to the decorative component, you pay attention to the power of the unit, you can acquire excellent equipment for heating the room.
- The thermostat, which is equipped with a gas fireplace, does an excellent job of maintaining the set temperature.
- For devices equipped with a closed firebox, the manifestation of control and special attention is not required. They are highly secure. In the case of open fireboxes, flammable objects and substances must be removed from the unit.
- When servicing gas fireplaces, time and physical strength are saved, because in this case it is not necessary to clean the furnace from ash and soot.
- Ease of installation is ensured by the low weight of the structure.
- The environmental safety of gas-fired units is due to the release of steam and carbon dioxide escaping into the chimney when exposed to high temperatures.
- The presence of a modern automatic system that helps to shut off the flow of gas in the event of an interruption in its supply, creates a safe environment for the operation of the fireplace.
Additional classification
Fireplaces on gas cylinders, regardless of their dimensions, characteristics are also divided into:
- Gas fireplace for an apartment, a house floor. Such stoves are installed on the floor, mainly suitable for large rooms;
- Gas fireplaces in the apartment can be of suspended type. Heating systems are lighter and smaller. They can be placed even in rooms with limited footage. Moreover, their efficiency is not worse than that of floor-standing counterparts.
Gas fireplaces for heating: pendant model with triangular fireproof transparent glass
Benefits of gas structures
A portable gas fireplace, as well as a stationary one, has a number of undeniable, significant advantages:
- A gas fireplace for a country house has an affordable cost, which distinguishes it favorably from similar wood-burning stoves operating on solid fuel;
- Installations are economical, since the cost of gas is lower than, for example, biofuels;
- A gas fireplace for heating is characterized by high efficiency and power, which is enough to heat rooms, while simultaneously performing a number of other functions;
- The gas fireplace stove can have a different arrangement, a unique design, which will allow you to choose the most suitable option for your house, apartment and interior.
Built-in fireboxes are less efficient, but more budgetary
Gas fireplaces for a country house: massive wall installation, in appearance resembles a wood-burning stove
The device runs on liquid fuel: the unit is made in high-tech style
