Kiturami boiler and the advantages of its installation: popular models and prices

Gas heating boilers made in South Korea are considered to be products of average quality and cost.

This is quite a fair opinion, however, there are pleasant exceptions.

Kiturami products deserve to be put on a par with the most famous and popular boilers of European production.

High quality, advanced design and other advantages of the units have made them famous and in demand both all over the world and in Russia.

Boilers demonstrate high competitiveness, have a lot of advantages and require more careful consideration.

Kiturami gas boilers

The South Korean company Kiturami was founded in 1962 as a small metalworking workshop.

During its existence, a small company has managed to develop into a solid and powerful corporation that produces a wide range of heating equipment for various purposes.... Scientific and technical research is being carried out, new units and parts are being tested.

Kiturami gas boilers are created according to the most efficient and advanced technologies, but without excessive oversaturation of unused functions that only increase the cost.

The result of this approach is a range of economical and durable units capable of performing tasks of any complexity and volume, with high reliability, resistance to external loads and durability.

Advantages of Kiturami boilers

Kiturami equipment is not without its drawbacks. Its weaknesses: demanding fuel quality and the need for periodic maintenance. If the recommended conditions are not observed, boilers made in South Korea can quickly fail.

Main advantages:

• advanced automation and electronic control: maximum comfort and safety for the user;
• two circuits: for heating and preparation of domestic hot water;
• economy and efficiency: the use of the latest developments allows you to use the fuel resource to the maximum;
• efficiency: 84–98%;
• built-in protection against freezing of the heating system and blowing out the chimney;
• easy transition to another type of fuel by changing the burner;
• modest dimensions;
• wide power range: 9–465 kW;
• long term of work - up to 10 years;
• self-diagnosis of malfunctions;
• a wide network of service centers.

In addition, the prices for Kiturami boilers are much lower than for similar models from other manufacturers.

Prices for the model range of Kiturami boilers

boiler Kiturami

Views

Kiturami gas boilers are available in a wide range and can be conditionally divided into groups according to certain criteria.

By type of installation there are:

• Floor standing... Installed on a special stand or directly on the floor.
• Wall mounted... They are hung on solid walls or on special supporting structures - ramps. Hitching onto temporary or plasterboard partitions is prohibited.

By feature set:

• Single-circuit... Carry out only heating of the coolant for the heating system.
• Double-circuit... In parallel with heating the coolant, they are capable of heating hot water for domestic needs in a flowing manner.

All models are equipped with a closed combustion chamber (turbocharged). This means that air supply and smoke extraction are carried out using a special turbocharger fan, which provides stable draft and independence from external weather conditions or the characteristics of room ventilation.

By type of heat transfer:

• Convection... Normal heating of the heating medium in the flame of a gas burner.
• Condensing... Intermediate heating of the coolant is used from the thermal energy obtained by condensing water vapor from the exhaust smoke. The full operation of such a boiler is possible only on low-temperature heating systems (such as underfloor heating), as well as if the temperature difference inside and outside the room does not exceed 20 °. In other conditions, the boiler operates as a conventional condensing unit.

IMPORTANT!

Among the Kiturami lines, there are condensing boilers that require specific operating conditions that are impossible in most regions of Russia. When choosing a unit, this should be taken into account, since the prices of condensing models are much higher than those of convection ones.

Service prices

Type of work	The cost
Repair and maintenance of Kiturami boilers
Cleaning the boiler in the combustion chamber	RUB 500
Cleaning the exhaust muffler	200 rbl
Cleaning Flame Arresters and Flame Arresters	1,500 rubles
Cleaning the exhaust pipe with stabilizer	200 rbl
Cleaning the fuel pump	RUB 500
Replacing the nozzle	1 400 rub
Chimney dismantling / installation collapsible chimney without self-tapping screws	RUB 500
Replacing the filter element	200 rbl
Full range of boiler maintenance works
The amount for work in the winter without a contract	5,000 rubles
The amount for work in the summer without a contract (with a 30% discount)	3,500 rubles
The amount for work in the summer period under the contract (with a 60% discount)	2,000 rubles
The amount for work in the winter period under the contract (with a 40% discount)	RUB 3,000
Deducted from the amount paid under the contract	RUB 10,000
Excluding transportation costs (1 km from the Moscow Ring Road)	30 rbl
By paying only 10,000 rubles. in a year you have the opportunity to service, repair and pay within the remaining amount minus the time spent under the contract for spare parts and transportation costs.

Gas series and related models

Among the Kiturami floor standing boilers there are the following series:

• KSG... Powerful heating systems developing from 50 to 200 kW. Designed for heating only, but can be connected to an external storage boiler, which makes them capable of providing the house with hot water. They are capable of heating large areas, if necessary, they can be connected in a cascade of up to 4 units.
• STSG... 4 models of relatively low power (from 16 to 58 kW), designed for heating small and medium-sized private houses. All models are double-circuit, equipped with a separate heat exchanger, with a closed combustion chamber.

Wall mounted boiler series Kiturami:

• WORLD PLUS... The series is represented by 5 models with a capacity of 15, 16, 20, 29, 34.9 kW. All models are double-circuit, designed for heating and supplying hot water to rooms up to 350 m2. The series is manufactured specifically for use on the territory of Russia, adapted to technological and climatic conditions.
• TWIN ALPHA... 5 models from 15 to 35 kW. Double-circuit boilers with a separate heat exchanger.
• TWIN ALPHA NEW COAXIAL... Slightly improved TWIN ALPHA series, which includes models with the same parameters. Designed to use a European type coaxial chimney (horizontal),

There is also the Kiturami Eco series, made up of condensing boilers.

Types of units and models Kiturami

manufactures boilers operating on various types of fuel, as well as hybrid versions.

Gas

Kiturami gas-fired units are produced in floor-standing and wall-mounted versions. The horizontal surface models are presented in three lines: STSG, TGB and KSG. Wall mounted gas boilers are produced in 4 series, differing in functionality and equipment.

The power of the units ranges from 11.7 kW for residential versions to 464 kW for industrial versions. For safety reasons, all devices are equipped with gas leakage sensors.

The gas burner device with afterburning function is Kiturami's own development. The peculiarity of the part is that it includes a plate made of a special metal that can heat up to 800 ° C. In the high-temperature mode, a more complete combustion of fuel material and a decrease in emissions into the environment are achieved.

Kiturami STSG

The STSG line includes 5 standard sizes of household floor standing boilers. It features a stainless steel boiler heat exchanger with the ability to quickly heat water. It works stably with gas pressure drops in the pipeline.The devices of the series are compact in size and can be easily placed in small rooms.

Benefits:

• saving space (boiler and boiler in a single body);
• modes of reduced resource consumption ("absence", "sleep" and others);
• welding of parts using our own technology;
• built-in DHW coil for abundant hot water supply.

Kiturami TGB Series

TGB boilers are represented by the only model 30R with a capacity of 34.9 kW. The device has a high-alloy steel three-way heat exchanger. It allows you to heat and provide hot water supply to the room with a square of up to 350 meters. Floor-mounted. In summer, you can use the water heating mode without heating.

Kiturami TGBs are distinguished by an increased level of protection.

Safety devices:

• circulating pump fuse;
• lightning and fire protection;
• stop in case of gas leakage;
• shutdown in case of overheating of the coolant and low liquid level in the system.

Kiturami KSG

The series unites powerful industrial floor-standing units in seven standard sizes. The case is protected by a load-bearing frame for safe transport. The design includes a storage tank capable of providing residents with a large amount of hot water. Due to their low weight, they can be placed in attic spaces.

Equipment:

• combined double-circuit heat exchanger;
• electronic ignition;
• gas filter cartridge;
• thermostat-regulator with a choice of modes;
• gas multiblock (stabilizes the gas pressure before being fed to the burner).

Kiturami twin alpha

The boilers of the range are made in a hinged version and are equipped with an integrated heat exchanger. The DHW circuit is located inside the expansion tank, due to which rapid heating of the water is achieved. Convection units are equipped with advanced automation, right up to the seismic sensor. The main heat exchanger, made of copper and aluminum, can last up to 12 years. The hot water temperature is conveniently regulated in the range of 35–60 ° С.

Technical features:

• automatic restart when blowing out;
• water hammer protection;
• built-in expansion tank;
• advanced silent fan;
• gas valve with proportional control system (to save flow);
• instant heating of water.

World plus line

The series was developed in 2010 specifically for work in harsh conditions. Instead of water, non-freezing liquids can be used as a heat carrier. The latest development is implemented in the boiler - a burner with an internal flame. It provides gas savings due to its complete combustion. In the event of a malfunction, an alarm is triggered.

World plus is a complete boiler room in a single building.

The composition includes:

• pump for forced circulation of water;
• expansion capacity;
• security group;
• electronic control unit with a remote thermostat.

The series includes 5 wall-mounted models of different capacities.

Kiturami Hi fin

Units of the series are considered the safest among Kiturami gas boilers. The range includes 6 mounted models from 11.7 to 34.9 kW. The durable bithermal heat exchanger is made of steel with aluminum inserts. Due to the additional combustion zone, an increase in the productivity of hot water supply is achieved. The range is equipped with an advanced gas leak detection system.

The Kiturami Hi fin boiler is suitable for any type of heating system, compatible with the "warm floor" function. The design includes a built-in circulation pump.

Unit features:

• a new double-sided burner that evenly distributes the heat in the firebox;
• stable combustion at low gas pressure;
• storage heat exchanger;
• proportional gas valve;
• protection against power surges;
• circulation pump included.

Kiturami Eco Condensing

Range of 3 wall-hung condensing boilers. To increase the efficiency, they use the energy of steam cooling.The technology implies a significant decrease in the temperature of the flue gases when passing through a four-pass heat exchanger. Cooling down, the smoke loses a certain amount of energy, which is additionally transferred to the coolant.

The new design of the integrated turbofan allows safe use in areas with strong winds and on high floors.

Differences of the series:

• condensing heat exchanger;
• energy efficiency of the 1st degree - 98%;
• mixed turbofan for operation in rarefied conditions;
• the use of metal fibers for uniform combustion of the flame.

Diesel

Kiturami heating boilers for liquid fuel differ from diesel units from other manufacturers in their increased efficiency and manufacturability. The devices are floor-standing.

All devices are double-circuit and are equipped with an alternative burner. If necessary, the user can easily switch to gas fuel. In summer, you can use the water heating function separately from the heating.

Structural elements:

• fuel tank;
• pump;
• filter;
• burner;
• heat exchange unit;
• smoke channel;
• control group: sensors, thermostat (control panel).

The boiler functions as follows. From the tank, by means of a pump, fuel is supplied to the burner, pre-filtered. Liquid is sprayed through the nozzles in the combustion zone. Internally, a mixture of fuel and forced air is burned, generating heat. Energy is transferred through the heat exchange channels to the water of the heating system. The exhaust gases are drawn into the chimney.

Diesel units "Kiturami" are presented in 4 series.

Kiturami turbo

The basic series of domestic boilers Turbo combines devices for heating rooms with sizes from 90 to 350 m2.

Features:

• three-pass heat exchanger "3-PASS" promotes more complete heat transfer;
• built-in turbulator for forced smoke extraction (you can use a simplified chimney instead of the traditional bulky pipe);
• secondary heat exchanger made of stainless steel guarantees clean hot water without deposits;
• reduced noise level due to the muffler;
• The large displacement of the DHW circuit supports a fast supply of heated domestic water.

Kiturami STS

STS products differ from the Turbo series with a stainless steel heat exchanger. Accordingly, their prices are slightly higher. Heat generators are designed for residential and industrial buildings with dimensions of 150-340 sq. m.

Differences:

• stainless steel parts are resistant to corrosion;
• the storage heat exchanger heats up a large amount of water in a short time;
• the use of laser welding technology excludes leakage through the seams;
• for ease of installation, there are outlets for connecting heating pipes on both sides of the case.

KSO series

Kiturami KSO - high power industrial heating units. They are used in the maintenance of industrial and commercial facilities. They are capable of heating buildings with a square of 580–4650 meters. They have the ability to heat water for domestic needs in large quantities.

Features of the device:

• improved design of the turbocyclone burner with flue gas afterburning increases efficiency and reduces the emission of harmful substances;
• power steel frame protects against damage during transportation;
• secondary heat exchanger of capacitive type made of stainless steel;
• extruded heat transfer pipes increase the contact area, providing increased efficiency without increasing the size of the heat exchanger;
• KSO boilers can be assembled in a cascade of up to 10 pieces.

Turbo Hi fin

Kiturami boilers of the Hi fin series differ from the basic Turbo models in an improved heat exchanger. Suitable for use in forced circulation systems.

Design differences:

• heat exchange passages are made of pipes with special inserts to increase heat removal;
• updated burner with afterburner;
• convenient connection to the heating network (from either side);
• the DHW spiral heat exchanger provides continuous supply of water in large quantities.

Solid fuel

Solid fuel boilers are suitable for use in rural areas. To obtain thermal energy, the units consume biofuel: wood and coal. It is possible to use briquetted and granular materials of various origins.

Features of operation:

• availability of fuel material;
• limited time on one tab;
• the need to constantly manually service the boiler: load new portions of fuel and clean the ash several times a day;
• chimney and chimney are periodically clogged with soot deposits.

Solid fuel boilers are of the classic and pyrolysis type. In the first case, the unit has one combustion chamber.

The second option is structurally more complicated. The firebox of such a device is divided into two parts. Fuel is placed in the upper chamber and heated to pyrolysis. The wood gas generated in the process is forced through a nozzle into the lower chamber and burned there.

Pyrolysis boilers are more efficient. Another plus is their low waste.

Kiturami kf

The series is represented by the 24 kW KF-35 model. The pyrolysis type boiler is capable of heating rooms up to 240 sq. m. One full load of fuel enables continuous operation of the unit throughout the day. Household water heating rate 14.7 l / min. The efficiency is 91.5%.

Design advantages:

• capacious loading chamber for 50 kg;
• stainless heat exchanger;
• a ceramic nozzle between 1 and 2 combustion zones contributes to the complete afterburning of fuel and pyrolysis gases;
• large loading hatch;
• the blower fan maintains a stable hearth in the firebox;
• the secondary combustion chamber is equipped with a pyrolytic liquid drainage device;
• ash collector in the form of a box.

Kiturami KRP

The KRP range includes pellet boilers that use wood pellets. Granule diameter: 6–8 mm, length: 1–3 cm. A full hopper allows the equipment to work without interruption for up to 5 days. The lineup consists of 2 standard sizes: 20A and 50A.

Technical features:

• automatic fuel supply by means of a screw mechanism;
• built-in expansion tank and circulation pump;
• ash pan in the form of a box;
• pellet burner in the form of a bowl with an increased ignition area;
• automatic vibration cleaning of grates.

Combined

Hybrid heaters run on solid and diesel fuels. Structurally, such units combine two devices in one housing. They have separate combustion zones: one for solid fuel material, the other for diesel fuel. When the resource in the first chamber runs out, the oil burner starts to work automatically.

The advantage of combined type boilers is their relative independence from any one type of fuel. For the user in the face of supply disruptions, this factor plays an important role.

Bi-fuel series KRM

The line is represented by 2 models: KRM-30 and KRM-70.

The solid fuel combustion chamber is made according to the classical scheme. Equipped with a grate. The ash compartment is located below. A diesel fuel combustion chamber is located above the primary firebox. Around the perimeter, the body is framed by a water jacket. Heat transfer pipes are located in the cavity.

The boiler works as follows. Fuel material is placed on the grate through the loading door and ignited. Air is sucked into the combustion zone through the blower in the ash pan door. Heat energy from the hearth is transferred to water through heat exchange. When the fire in the primary furnace is extinguished, the oil burner torch is automatically ignited.

Features of the device:

• heating and filtration of diesel fuel;
• automatic control of air supply;
• restart on power failure;
• cleaning tools included.

Kiturami KRH

The line consists of a single KRH-35 model.To burn firewood, the device uses a pyrolysis method. Unlike the basic KR series, the enlarged firebox of the product accommodates 90 cm logs and is not afraid of raw firewood. When solid fuel is burned, the boiler automatically switches to diesel fuel.

Features of operation:

• it is convenient to ignite using a special button;
• when using wet fuel, you will have to clean the boiler from resin 2 times a week;
• economical consumption allows you to load the device once a day;
• automatic discharge of the pyrolytic liquid through the drainage device.

Specifications

Consider the technical characteristics of Kiturami boilers:

Parameter	Value
Boiler type	Gas heating
Heat transfer method	Convection or condensing
Functionality	Heating, hot water supply
Power	15-297 kW
Efficiency	92-98 %
Installation method	Floor-standing or wall-mounted
Gas burner type	Closed
Energy consumption	Single-phase current 220 V 50 Hz

Kiturami Turbo diesel floor standing boiler examples

For an example of fuel consumption and other characteristics, let's see examples of boilers.

KituramiTurbo HiFiN 13 26 958.00

• 16800 watt boiler;
• Heating efficiency 91%;
• Hot water efficiency 89%;
• Continuous operation consumes 1.98 liters per hour.
• Hot water is supplied at 25 ° C with a volume of 9.7 liters per minute;
• Power consumption for sensors and fans 95 W;
• Chimney D = 80 mm;
• Dimensions (H_W_D) 700 × 325 × 602 mm;
• Weight: 40 kilograms.
• The cost of the boiler is about 27,000 rubles.

The following Kiturami Turbo models:

• HiFiN 17: 19,800 watts, 89.5% / 89.4%. Consumption 2.18 liters per hour;
• HiFiN 30: 34900 watts. 87.5% / 87.2%. Consumption 4.60 liters per hour (about 36,000 rubles).

Advantages and disadvantages

The advantages of Kiturami gas boilers are:

• High operational capabilities of boilers, reliability, efficiency.
• Stable operation, low failure rate or failure rate.
• High build quality, reliability of assemblies and parts.
• A wide range of models to suit any need.
• Optimal set of functions, lack of unused features that increase the price of the boiler.
• Silent operation, simple operation.
• Relatively low cost.
• Compactness, attractive appearance.

The disadvantages include:

• Volatility. When the power is cut off, the heating system stops working. In addition, Boilers are sensitive to correct connection and stability of the power supply.
• The need for maintenance by qualified personnel.

NOTE!

These disadvantages are inherent in any gas boilers and can be considered specific design features.

Features of Kiturami boilers

The South Korean manufacturer approaches the process of assembling gas boilers responsibly. Here, efficient burners are used that give maximum heat and are characterized by a low amount of toxic components in the combustion products. Also, reliable heat exchangers are installed in the equipment from Kiturami - the duration of the service life of the equipment depends on them. It should be noted also high-quality electronics, which ensure economical consumption of gas and facilitate management.

Kiturami gas boilers are presented on the market in two main types - wall-mounted and floor-standing. Wall-mounted models are arranged in three model lines. The same number of lines in the segment of floor standing devices. It is noteworthy that all boilers are double-circuit. Power varies widely - from 11.7 kW for household models to 464 kW for industrial designs.

Device

The main structural elements of the boilers are the gas burner and the heat exchanger. These are independent units, but they work in pairs and are structurally combined.

The coolant under the action of the circulation pump enters the heat exchanger, heats up and leaves the secondary plate heat exchanger, where it gives off part of the thermal energy for the preparation of hot water. After that, the coolant flows into the heating circuit.

Exhaust and air supply for normal combustion is provided by the turbocharger fan, and the control board controls the operation of the system.

A system of self-diagnosis sensors is connected to it, detecting malfunctions and giving signals to the control board, which immediately triggers an alert on the boiler display.

Wall mounted boilers

Wall-mounted boilers Kiturami, like floor-standing boilers, are used to obtain hot water and heat a house. But they are much smaller in size, which allows them to be used in any room and area of ​​the house, be it a bathroom or a kitchen.

In turn, wall-mounted boilers are divided into two types:

• Single-circuit boilers
  They are intended for heating only. At first glance, the purchase of such a boiler may not seem very profitable, but it is ideal for a house in which there is a central water supply, but there is no heating.
• Double-circuit boilers
  Such boilers provide homes with both hot water and heating. An excellent solution to two problems at once. Boilers with an open combustion chamber

Operation and setup

The operation of Kiturami boilers is automatic.

From the user, in order to configure, only a few actions are required:

• Adjustment of temperature, carried out in the working order.
• Draining and filling the system with water.
• Periodic cleaning of the boiler body from soot or dust.

All other actions take place either automatically or by the forces of invited specialists. This is especially true for the initial setup, which overrides factory settings for greater performance and economy.

Download instruction

Download instructions for gas boilers Kiturami.

Unauthorized intervention in the boiler structure may cause its breakdown and void the warranty agreement.

Hardware installation and connection

All the requirements for connecting Kiturami are absolutely not difficult to fulfill yourself. You can install a Kiturami diesel boiler without the help of specialists, it is enough to carefully study the scheme and recommendations of the manufacturer itself. But at the same time, there are many operations that require the presence of qualified craftsmen in order to subsequently avoid incorrect actions to avoid repairs.

For those people who for the first time have to assemble Kiturami diesel boilers, the instructions and installation diagram will serve as an illustrative example of such work. It is very important that the Kiturami Turbo is connected using the electrical diagram of the boiler and that all recommendations for connecting to the mains are clearly followed.

Who is not sure that he can independently perform all the work on which the tuning of the Kiturami diesel boiler directly depends, it is best to involve specialists, and thus avoid possible mistakes and premature repairs.

The Kiturami diesel boiler requires an extremely accurate order and principle of its installation, since an incorrect connection is most often the cause of equipment malfunction and it becomes necessary to carry out expensive repairs of Kiturami diesel boilers.

Major malfunctions

Kiturami boilers are renowned for their reliability and durability of parts. However, the possibility of individual problems cannot be ruled out.

Most often, the components that are under maximum load fail - the heat exchanger and the gas burner.

A layer of limescale builds up in the heat exchanger, which reduces the heat transfer efficiency.

It is necessary to increase the combustion temperature, as a result of which the outer part of the unit gets too hot and fails.

A gas burner is susceptible to clogged nozzles and other problems that lead to flame extinguishing and difficulty in firing up the boiler..

Often there are malfunctions of the self-diagnosis system sensors themselves - poor contact, open circuit, short circuit.

Combined boilers

Available in two model ranges KRM and KRH

Bi-fuel boilers KRM series

Developed for the use of solid and liquid fuels. They are equipped with all the accessories that make up the basic Kuturami package: • Alloy steel heat exchanger with welded seams specially reinforced using the patented Kuturami technology. • A flow-through heat exchanger of the DHW system made of purified copper. • Automated system that controls the air damper of the solid fuel part. • Turbo cyclone burner in the oil part. • Fuel filter and fuel pump. • Automation system. • Circulation pump. • Remote temperature sensor. • Remote control. The boiler has undeniable advantages over products of the same class from other manufacturers, and the installation of two boilers in tandem: • Both combustion chambers are located in one housing, which eliminates heat loss and increases heat transfer. • Automatic transfer to the use of the second type of fuel, in case of complete combustion of solid fuel. • Automated regulation of solid fuel combustion. • Both fireboxes are closed. The air is supplied by a special fan with an outside intake point. • efficiency up to 92%.

Model range KRH

Models of the presented series have a 3-stage combustion system. This boiler has a gas generating (pyrolysis) type of solid fuel part. As with the previous model range, it is equipped with all efficiency-enhancing components and assemblies, and an automatic changeover system to diesel fuel. But there are also differences. More detailed safety functions are: • Automatic shutdown in case of overheating of the diesel part and blocking the air supply to the solid fuel part. • Heat carrier temperature sensor. • Heat exchanger temperature sensor. • System of automatic re-ignition after stopping.

The boiler has an oversized firebox that can hold firewood up to 0.9 m long. A full bookmark allows you to work on solid fuel for up to a day. Wet wood can be laid. The boiler provides drainage and drainage of pyrogenic waters. The included Turbo 21R liquid fuel burner (24.4 kW) with a plunger pump fuel supply system can be replaced in normal operation with a more powerful one with a gear pump.

Error codes, decryption and how to fix

Consider the most common errors of Kiturami boilers:

The code	Decoding	Remedy
01-03	Unsuccessful ignition of the flame	Check the condition of the burner nozzles, the presence of gas in the line, the condition of the valves and the supply valve
04	Temperature sensor malfunction	Checking the status of contacts, calling the wizard
05	Failure of the boiler overheating sensor	Call the master
06	Fan operating mode is not detected	Check the status of contacts, call the wizard
07	Incorrect fan speed	Call the master
08	The wire length of the room temperature controller is exceeded	Cut the wire, check if it is in contact with the telephone line
95 and 98	Low water level in the heating circuit	Add water, check system for leaks
96	Overheating of the coolant	Check the operation of the circulation pump, increase the liquid level in the system, call the master
97	Leak of gas	Turn off the boiler, open windows, call specialists

‘> Solid fuel boilers

Available in the KF and KR series

Both models have the same operating principle and are equipped with: • Storage heat exchanger. • Two-way heat exchanger. • Computer control. • Remote thermostats. • Remote control. • Built-in DHW flow circuit. • Fan with proportional control. • Circulation pump. The difference is in the availability of an electronic control panel and the ability to change modes (winter, summer) by redirecting all the energy in economy mode to DHW. Some KR models do not have grates.

Pellet solid fuel boilers

Presented by KRP series models. Differs in thoughtfulness and reliability of the design.High level of efficiency and automation. • Height of the hopper 120 cm. With a wide loading niche of 40 cm. Designed for 150 kg. fuel, which gives autonomy for 5-7 days. • Pellet feeding is carried out using a screw auger with an electric motor, which ensures accurate and timely shipment. • Automatic cleaning of the heat exchanger surface is carried out using a powerful compressor (flow rate 8 kg / cm2) and a high-speed solenoid valve. • The electric drive of the ash cleaner automatically cleans the grates in the combustion chamber, preventing fuel caking. • The turbo-cyclone burner doses the air into the combustion chamber to optimize the combustion process. • A three-way main heat exchanger repeatedly drives hot gases in the combustion chamber, bringing the efficiency of the device to 92%. • Spacious ash box. • Instantaneous DHW heat exchanger made of stainless steel with a diameter of 15 mm, which makes the possibility of clogging very remote. • Convenient and detailed control system. • A system for alerting the presence of pellets in the bunker (there is a safety valve against overflow), water in the heat exchange system, and the operation of the pellet feed auger.

A huge advantage of the Kuturami pellet boilers is their versatility and unpretentiousness in relation to combustible materials, sawdust pellets, shavings, wood chips, sunflower husks and buckwheat, this is not a complete list of materials that can be loaded into the boiler. The moisture content of the pellets is of greater importance. As users write in their reviews, if the wood pellets are damp, then they can not only inevitably reduce the efficiency of the boiler, but also jam the screw feeder.

Price range

The model range of Kiturami gas boilers is very wide. The cost of household models (for a private house) is in the range of 30-60 thousand rubles, but there are also more powerful models that will cost 100-800 thousand rubles.

This price difference is due to the degree of power and capabilities of the boiler, its purpose and design features..

As a rule, users choose units of lower power and, accordingly, cost.

Please check the terms of delivery before purchasing. Boilers in the basic configuration do not have a chimney, so you must immediately decide which type is needed and order it. You should also immediately get filters and a voltage stabilizer..

The cost of boilers of different types

The big plus is that all the necessary items are included in the package. Other companies often sell parts such as thermostat, control unit separately, which increases the cost of the complete product.

The cost of solid fuel models (in rubles):

• KF-35A 127 199;
• KRP 20A - 270 799;
• KRP 50A - 318 499.

Bi-fuel heat generators are also represented by 3 devices.

Prices for them (in rubles):

• KRM-30 - 137,999;
• KRM-70 - 218,599;
• KRH-35A - 168 099.

Diesel boiler prices

The cost of production directly depends on the power of the device and its efficiency. The higher these indicators, the more expensive the purchase of the unit will cost. The rest of the parameters affect the pricing indirectly.

Other factors:

• area of ​​the heated room;
• fuel consumption;
• used materials;
• DHW performance;
• security level: presence of sensors and safety devices.

The comparative cost of liquid fuel units is shown in the table.

Gas unit prices

Kiturami Eco Condensing condensing units are available in 3 standard sizes.

Prices (in rubles):

• 16r - 52 360;
• 20r - 57,800;
• 25r - 59 440.

The TGB line includes one model: the 30R. You can buy it for 61,613 rubles.

The cost of traditional gas appliances is presented in the table.

We repair all gas boilers, including

• ACV
• Alphatherm
• Ariston
• Baxi
• Beretta
• Bosch
• Buderus
• Dakon
• De Dietrich
• Electrolux
• Ferroli
• Fondital
• Frisquet
• Immergas
• Junkers
• Kiturami
• Mora
• Navien
• Protherm
• Rinnai
• Roca
• Sime
• Siberia
• Thermona
• Tiberis
• Vaillant
• Viadrus
• Viessmann
• Westen
• Wolf
• Zhukovsky
• Lemax

When should a specialist be called?

Often, violations of the requirements specified in the instructions lead to problems with gas boilers. As a result, minor failures occur that can cause a breakdown or an emergency. Our experts will return your Kiturami boiler to a working condition regardless of the nature of the problem. It is necessary to call the master in the following situations:

• The case is damaged or deformed, often overheats.
• The water does not heat up well.
• The boiler ceases to cope with heating.
• Water flows from the boiler.
• A sudden shutdown of the unit occurs.
• Noise or grinding noise inside the cabinet.

When repairing gas boilers, our foremen are guided by the specifics of the equipment and the nature of the malfunction. We carry out repairs of Kiturami boilers of any model.

Why are the malfunctions occurring?

Using the latest technology, the Kiturami brand produces powerful and durable gas boilers. Deviations in their work can arise for several reasons:

• Mechanical damage during transportation.
• Incorrect installation.
• Violation of operating rules.
• Poor water quality.
• Power surges.
• Wear of spare parts.

Compliance with the recommendations for operation, regular service, installation of filters for water supply minimize the risks of disturbances in the operation of the gas boiler. If you find suspicious manifestations, you should immediately call the specialists of our company, who will arrive at a convenient time for you and fix the breakdown.