the main » Systems

Popular models of EcoLine infrared heaters: specifications and reviews

In recent years, infrared heaters have been used to heat rooms, since users are convinced that such heaters consume little electricity, they do not burn oxygen in the room, and are harmless to the human body.

The most necessary and convenient is the use of ceiling heaters, which are attached to the ceiling, even installed directly into the ceiling.

Film infrared heaters are popular among users, which have many advantages. Created with the help of ceiling heating systems, the film "warm ceiling" heats any room. The principle of operation of infrared radiation is as follows: changes in waves occur on the electromagnetic field, emitting heat. The sun's rays hitting the ground heat the soil surface, trees, houses. Radiation from these objects heats the air. Film heaters also work in this way.

Any infrared film has three components:

  • a heating element that converts electrical current into thermal energy;
  • foil for heat distribution over the entire surface;
  • double-sided laminated PET film for protection against any mechanical stress.

Infrared ceiling heater ALMAC IK-11

Read also:  The cooler does not heat up the water: reasons, tips for troubleshooting

Infrared ceiling heater ALMAC IK-11

PLEN system

Scientists have created a system of a new generation of film heaters IK PLEN, which are installed under the outer ceiling surface. This PLEH system is based on the use of a film heater that generates infrared radiation, the thickness of which is no more than 1-1.2 mm. Heating elements made of metal (copper, silver) with aluminum foil are built into the PLEN film made of lavsan. When current flows, the foil heats up, and infrared rays begin to emit, which charge the surfaces of objects in the room with heat. The charged heat energy is released back, and the living space becomes cozy and comfortable.

The PLEN system can be used not only as an additional heat source, but also for the main heating of houses, apartments, offices.

There are many advantages of PLEN heaters:

  • Ease of installation. The film heater can be installed by yourself.
  • The PLEN system is distinguished by its low energy consumption.
  • The film is fireproof, you can install it even in wooden houses, since the device heats up only up to 45 ºС.
  • PLEN maintains a normal level of humidity in the room
  • Allows efficient use of free space, as the film heater is installed on the ceiling
  • It is environmentally friendly. The film is made from environmentally friendly materials.

Along with the positive properties of PLEN, it also has disadvantages, the system cannot be used in rooms with wallpaper on the walls, plaster and paint.

When using film heaters, dust does not rise in the room. They work silently, are fireproof, durable, and most importantly, economical. For additional heat in the premises, infrared film heaters can be mounted, in addition to the ceiling, on the walls. An infrared film heater on the wall can serve as a source of heat in the country, in the garage.

The lineup

The range of IR heaters produced by Ecoline is quite wide and diverse:

  1. Heater IK for suspended ceilings Armstrong - IKO 04. The dimensions of the IKO completely coincide with the size of the suspended ceiling sections. Of all the models produced by Ecoline, this is the thinnest device. The total thickness of the structure is 17 mm. Heated area - from 4 to 8 sq.meters, power - 400 W, minimum installation height - 2 meters.
  2. Household devices - IKO 6, 8, 10, 13, 15. Used in kindergartens, country houses, apartments, offices, greenhouses. The minimum installation height is between 2.0 and 3.4 meters. The area of ​​the heated premises varies from 6.0 to 30.0 m². Depending on the model, the power of the heater also changes, which is 600.0-1500.0 W.
  3. Devices for industrial use - IKO 20, 30, 40. Such ICOs are used in workshops, warehouses, concert and sports halls, railway stations with a ceiling height of 3.0 - 12.0 meters and with an impressive heated area - from 20.0 to 80.0 square meters.

Note: the gap between the infrared heater and heated surfaces and objects must be more than 0.5 meters.

The price of infrared heaters Icoline is quite democratic and starts its countdown from 2,490.0 rubles.

Ecoline IR system

Ecoline infrared heaters are of great interest. They come in the form of a rectangular panel with a white or beige metal body with a silvery aluminum plate. Attach such a structure to the ceiling closer to the window. Ecoline refers to infrared heaters operating on the basis of long-wave radiation, suitable for heating all types of premises, warehouses and offices, production workshops and car dealerships.

IK EcoLine is efficient and convenient.

Ecoline benefits:

  • IR Ecoline can be used for additional heating when the main one cannot warm up the room.
  • An economical way to heat both small rooms and huge rooms with high ceilings.
  • Fast heating of premises in the shortest possible time.
  • Ecoline saves space by installing it on the ceiling.
  • The aesthetic design of Ecoline ceiling heaters suits any type of interior.
  • Ecoline heaters have a long service life and excellent quality. The warranty period is 6 years.
  • The device can be installed independently according to the instructions
  • Ecoline's fire safety is ensured by non-combustible components.

For high-tech rooms, there is a special series of glass heaters in a thin chrome frame with transparent glass.

The main rules for the operation of EcoLine heaters

  • Installation method - panels are installed only on the ceiling. Wall mounting is not permitted. The minimum permissible floor clearance is indicated for each transmitter model.
  • The location of the thermostat is optimal, set the control side at a distance of 70-80 cm from the floor. This is due to the peculiarities of infrared heating of the room. Near the floor itself, the temperature will be 2-3 degrees higher than in the entire room.
  • Accurate calculation of the number of EcoLine heaters. The instructions give the maximum permissible heated area. The characteristics for using the device as a main and additional source of heating are indicated. It is quite simple to calculate the power using the technical documentation. Excessive loading of the device leads to rapid decommissioning.

Peony heaters

Infrared heaters Pion are main heating devices characterized by low power consumption and high heat output. They are made in the form of a semi-cylindrical plate, their body is small in size made of aluminum alloy, giving very soft heat.

Infrared heaters Peony Ceramic is a novelty on the market of heating devices in which a ceramic plate emits infrared rays.

Heaters Pion TERMO Glass have unique heating elements made of tempered thermal glass, the body is made of high-quality sheet steel, covered with heat-resistant paint. Infrared heaters with Pion thermostat make it possible to control the supply of heat, creating an economical mode.

What are ICOs

IR heating systems consist of the following structural elements:

Read also:  How to install balcony heating from central heating?
  • metal casing of rectangular shape with fasteners and applied heat-resistant coating;
  • tubular electric heater (TEN);
  • heat emitting sheet (plate);
  • heat reflector and heat insulator.

The use of high quality components allows achieving impressive efficiency, long service life and high safety.

The peculiarity of the Icoline IR heater is that the device is mounted on the ceiling and the thermal energy from infrared rays is directed and absorbed by various surfaces in the home.

Under the influence of infrared rays, objects and floors heat up and transfer heat to the air in the room. In order to maintain the optimal temperature regime, as well as for the safe operation of heating devices, it is better to use the IKO with a thermostat.

The thermostat allows you to turn on and off the heating system when a predetermined thermal parameter is reached, receiving a signal from the air temperature regulator.

Read an article about the features of infrared heating films here.

The infrared radiation range of Icoline heating devices affects the scope and purpose of the IKO:

  • independent or additional heating;
  • local heating inside and outside the room (anti-icing);
  • use in winter conditions during construction work - heating of soil and concrete;
  • heating for outdoor activities.

The most gentle and safe for humans are heating devices that generate infrared radiation with a wavelength of 9.6 microns.

IR heaters Bilux

The advent of Bilux infrared heaters made it possible to achieve excellent heat transfer when heating various premises, such as country houses, private country cottages, warehouses and production workshops. Ceiling heater Bilux differs from other systems in terms of economy, consumes a minimum amount of electricity, the use of this heater is considered an economical approach to heating houses. The infrared system can be used for heating and large areas. It will completely replace traditional heating methods using cable and water systems.

Choosing infrared ceiling heaters EcoLine

    Content:
  1. A little information about the EcoLine brand
  2. EcoLine IR heaters range Household heaters - economical and safe
  3. Industrial emitters - powerful and efficient
  • What are the advantages of EcoLine IR products
  • The main rules for the operation of EcoLine heaters

    • Infrared ceiling heaters EcoLine, manufactured by TST (Technical Systems and Technologies), have firmly established themselves on the climate technology market. The popularity of products is facilitated by the introduction of innovative solutions and technologies aimed at increasing the comfort and safety of operation.

    What is the principle of BiLux heating?

    When using the IC BiLux device in the room, the surface of objects and floors heats up. This system is ideal for heating children's rooms. The device takes up little space on the ceiling.

    BiLux is characterized by efficiency and safety for the human body. Infrared rays, penetrating the air, turn into heat when in contact with any surface.

    Therefore, the result is like this:

    • there is an even and rapid distribution of heat in the room;
    • more than 80% of the heat goes to the area where the person is staying;
    • energy is spent in a minimum amount;

    The heating device is distinguished by its durability, stylish thoughtful design, and will last more than 20 years.

    The most used system is BiLux:

    Read also:  Solar collector and other efficient heat accumulators for greenhouses, also made by hand. Solar panels - how they work
    • in shops, cafes to create a local heating of the workers' zone;
    • for warming up in winter gardens and green corners;
    • for insulation of loggias and balconies.

    IC BiLux: create a favorable microclimate in the premises, heat rays prevent the development of fungi and mold. With an electric heater BiLux, any room will be comfortable and warm.

    What are ICOs

    IR heating systems consist of the following structural elements:

    • metal casing of rectangular shape with fasteners and applied heat-resistant coating;
    • tubular electric heater (TEN);
    • heat emitting sheet (plate);
    • heat reflector and heat insulator.

    The use of high quality components allows achieving impressive efficiency, long service life and high safety.

    The peculiarity of the Icoline IR heater is that the device is mounted on the ceiling and the thermal energy from infrared rays is directed and absorbed by various surfaces in the home.

    Under the influence of infrared rays, objects and floors heat up and transfer heat to the air in the room. In order to maintain the optimal temperature regime, as well as for the safe operation of heating devices, it is better to use the IKO with a thermostat.

    The thermostat allows you to turn on and off the heating system when a predetermined thermal parameter is reached, receiving a signal from the air temperature regulator.

    The infrared radiation range of Icoline heating devices affects the scope and purpose of the IKO:

    • independent or additional heating;
    • local heating inside and outside the room (anti-icing);
    • use in winter conditions during construction work - heating of soil and concrete;
    • heating for outdoor activities.

    The most gentle and safe for humans are heating devices that generate infrared radiation with a wavelength of 9.6 microns.

    It is important to know: the direct long-term influence of infrared radiation on the eyes should be excluded in order to avoid burns of the cornea.

    IR panels for heating

    Among heating devices, infrared panels occupy a special place, which are 2 times more efficient than electric boilers, oil radiators. The heating elements of the panel radiate energy, which is almost completely expended to create warmth and a feeling of comfort.

    • Heating panels ENSA are made using environmentally friendly materials.
    • The panel body is made of high quality durable steel that can withstand high temperatures.
    • The super-thin heating element of the panel helps to reduce power consumption, while increasing heat transfer.
    • A heating element is installed in the ENSA IR panel, completely enclosed by a non-combustible, heat-resistant dielectric.

    The panels have side walls of the heaters, with the help of which the heating result is increased, since the direction of the convective air flow is created.

    The heating season must be approached thoroughly, for this there are many types of infrared heaters on the heating equipment market: film, panel, and other economical devices that not only heat, but also have a therapeutic effect on the human body.

    Outdoor electric heaters

    → Electric infrared heaters →

    View:

    Show Filters

    Brands:

    Frico AEG Veito Heliosa Hügett Stellar MO-EL Luxeva

    Outdoor electric heaters

    Range electric infrared heaters for outdoor is presented in our catalog by the most popular and popular models of the best European and domestic brands. The variety of functionality and the uniqueness of design solutions allow the consumer to choose a model that ideally matches his needs.

    Why buy an outdoor electric heater?

    Outdoor heaters provide an opportunity to extend the opening season of open lounges, cafes and restaurants by 2-3 months, enjoy friendly communication in the gazebo of a country house or summer cottage in late autumn and early spring. Just plug the unit into a power outlet, and you will feel the gently enveloping warmth, creating a cozy atmosphere. Electricity is not wasted in vain Outdoor infrared heaters act pointwise - they heat people, animals and objects in their area of ​​\ u200b \ u200baction.

    Benefits

    Depending on the location, electric heaters are divided into ceiling, wall and floor.

    Suspended models are attached to the ceiling or wall with special swivel brackets included in the delivery set, floor-standing models are installed in any convenient place.

    The power of the heating element determines the radius of the structure and the degree of heating. Electric outdoor heater is able to increase the temperature in the coverage area by 5-10 degrees C. The devices not only provide heating, but also guarantee comfort and safety.

    • High efficiency.The heating elements convert up to 95% of the electrical energy into infrared heat.
    • Quick exit to the set mode. After plugging into the socket, the heating effect appears almost instantly.
    • Cost-effectiveness is another important factor in the popularity of equipment. Models equipped with a timer turn off at the appointed time, and the automatic thermostat will signal to turn off when the set temperature is reached. In addition to heating, equipment serves as a source of light, which frees the owners of open verandas of cafes and restaurants from the need to install additional lighting.
    • Reliability. Halogen lamps and carbon heating elements are designed for thousands of hours of trouble-free operation. The system is protected from overheating by a special sensor, and a high index of dust and moisture protection allows the equipment to be operated in conditions of high humidity and unfavorable meteorological factors.
    • Safety and environmental friendliness. The heating element is covered with a special grate, and under no circumstances can it cause an accidental burn. Suspended structures are mounted at a distance of about three meters from the floor, and the height of the floor ones on the bracket is more than two meters. During the operation of the heaters, oxygen is not burned, and the atmosphere is not polluted. For such equipment, gusts of wind are not terrible, as a result of which the fire in the burner can go out, and for effective heating, only the presence of voltage in the household electrical network is enough.
    • Compactness. Any sample from the model range can be moved from place to place by one person and easily fits into the trunk of a car.
    • Ease of installation and operation. Installation to the ceiling or wall is carried out within 15-20 minutes; for floor-standing models, it is enough to choose a suitable place and plug it into a power outlet. Maintenance of the equipment consists in periodic external examination and keeping the surfaces clean.
    • Variety of design solutions. Innovative findings from leading manufacturers allow us to satisfy the needs of even the most demanding customers. The introduction of modern materials into production made it possible to give the body of an electric street heater any geometric shape, while maintaining the entire range of performance characteristics. In our catalog you can choose light, graceful Neoclima, Frico, Stellar Horizon, AEG, Mo-El, stylish Heliosa, perfect in Luxeva shape, refined, made in the form of exquisite Hügett and Veito lamps.

    Outdoor electric heater

    An ideal opportunity to heat an open space with high quality, which is used by thrifty Europeans and Americans who know how to value comfort. Do not look for alternatives, decide to buy today.

    Power calculation and correct selection of the model is the key to success and safety

    Spot heating of the space of a summerhouse or veranda can create comfortable conditions for relaxation, however, if you are planning to accumulate heat on a large open terrace, it would be wise to use several heaters, the zones of action of which will overlap. When selecting models and calculating the number of outdoor heaters, you cannot do without professional advice. You should also not forget about security, and correctly calculate the power of the electrical network of your institution.

    Where to buy an outdoor electric heater?

    A wide range of models of the best brands, ease of navigation on the site, accessibility of viewing characteristics, free consultations on all issues of selection and operation of equipment, provision of quality guarantees, fast checkout and delivery in the shortest possible time - these are the main advantages of buying heating devices on our resource.

    Types of infrared heaters

    The existing types of infrared devices differ among themselves by the device of the element that emits streams of heat:

    • plate
    • quartz tube
    • open spiral

    The latter option has been known since the last century, when small-sized heaters were installed in many apartments, offices of institutions, in warehouses and other premises where quick heat was required. These devices were notable for the large incandescence of the spiral, and its insecurity often caused fires. In addition, the indoor air became unnecessarily dry, since the open spiral contributed to the combustion of oxygen.

    Quartz tube heaters feature improved design and greater safety. The heating coil is hermetically sealed in a metal tube, from where all the air is removed. This heats up the tube itself. But here, too, there were some drawbacks. The fact is that this metal tube heats up to a temperature of +700 degrees, and dust particles that have settled on it burn out, emitting an unpleasant odor, and also causing allergies in some people. But the efficiency of such heating devices is very high, even the highest of all similar devices.


    Infrared heaters - a unique technology

    A heater with a plate heating element is now more popular. It is a heating element (tubular electric heater), which is placed in an anodized aluminum profile. Since the heating of this device does not exceed +100 degrees, it is the safest, and also environmentally friendly, since it does not burn oxygen or dust in the room. The disadvantages include a quiet crackling sound emitted by the device during operation.

    Infrared heaters are also classified according to other parameters.

    By radiation range:

    • longwave
    • medium wave
    • shortwave

    By type of heat source:

    • gas
    • electrical
    • diesel

    By method and place of installation:

    • portable
    • stationary
    • wall
    • ceiling

    Benefits of infrared heaters

    With convector heating, warm air, according to the laws of physics, rises and accumulates under the ceiling of the room. Therefore, most often it is necessary to use fans that could "distill" warm air down.

    With infrared heaters, there is no need to use such devices due to the so-called effect of warm floors. The rays heat the surface of the walls and floor, which then transfer heat to the air. Therefore, hot gas streams begin their movement from the bottom of the "warm" floor.

    The advantages of infrared heaters are as follows:

    • The ability to use in open space.
    • Infrared heaters create localized heating zones, which reduces the use of the main heating system.
    • Most often, this type of heating device is installed under the ceiling, so that the device does not occupy the usable area of ​​the room.
    • Silence.
    • The use of infrared heaters can reduce the cost of other types of heating equipment by 5-7 times, for example, for a local heating system or convectors, which are much more expensive.
    • Infrared heaters have a long service life.
    • The rays, with the help of which the room is heated, have a positive effect on the human body.

    However, these devices, like all others, besides their advantages, also have disadvantages, which are manifested in the following:

    • Adequate ceiling height is required for installation.
    • The appliance may overheat with prolonged use.

    Specifications

    Power, W 600
    Voltage, V 220
    Current strength, A 2,7
    Dimensions, mm 1000*160*40
    Weight, kg 3,9
    Minimum suspension height, m 2,2

    Benefits

    • Heating rate. Compared to other heating systems, it has a high speed, while a lower temperature can be maintained at night to save energy;
    • In the production process, high-quality components and plastic are used, which is not subject to combustion;
    • Heat accumulation is possible, and in the event of a power outage, heat retention for a long time;
    • Does not require the installation of hoods, since the work process is not accompanied by emissions of combustion products;
    • Able to work up to 5000 hours at increased power.

    How to choose a device?


    Infrared heaters for heating production
    During external examination, it is necessary to pay attention to the plate - its color should be uniform. The anodizing layer is also important - it must have a thickness of at least 15 microns. Indeed, the service life of the device depends on this value.

    The heating element must be made of stainless steel. If it is made of another metal, then the device should be in dry rooms, but not on the balcony or in the garage.

    The body is painted with powder paint due to its high temperature resistance and protective properties. Painting the body from the inside will only increase the cost of the equipment, so when buying it is important to pay attention to where and how well the product is painted.

    The foil serves as a reflector, which increases the efficiency of the device. Its thickness should not be less than 120 microns, otherwise the heat will go to the ceiling. How to check if the thickness matches the declared value? You can put a point on it with a pen, and if the foil springs back, then the thickness is sufficient. Foil that is too thin will tear.

    The insulator should not allow the case to heat up above 100 degrees. Many materials easily cope with this function, but not all are harmless to the human body. To ensure safety, it is necessary to check the hygiene certificate that permits the use of this material in the food industry, for example, for insulating gas stoves.

    You may also be interested in
    gas boiler ferroli
    Plan owner reviews
    Film ceiling heater
    The advantages of Radena products
    Isobel
    How to adjust a Kiturami diesel boiler
    Infrared heating
    This is how the simplest model Purmo Compact looks.
    kitura cauldron price
    iwarm.decorexpro.com/en/

    Warming

    Boilers

    Radiators