Let's discuss the Ukrainian manufacturers of gas boilers, who used and knows which ones?

Heating boilers on the market are represented by a wide range of popular Ukrainian manufacturers.

You can choose a unit to your taste and financial capabilities: a gas boiler, electric or solid fuel, with one circuit only for heating or with two circuits also for hot water, and so on.

You can find out the price and buy heating equipment and related products from us. Write, call and come to one of the shops in your city. Delivery throughout the territory of the Russian Federation and the CIS countries.

Currently, boilers are produced in the Khmelnytsky region of Ukraine (brands Aton, Vulkan, Proskurov), Kharkov (brand Ross) and Rovnenskaya (brand Danko), etc.

If you decide to purchase a Ukrainian-made boiler, consider the following parameters:

• whether the structure depends on electricity;
• is there a hot water circuit or a boiler;
• measure the area to be heated and pay attention to the boiler output.

Aton

Boilers under the Aton trademark appeared on the market in 2003.

The boilers of the Ukrainian manufacturer Aton operate on different types of fuel. Gas-fired boilers in the assortment range contain several parapet models (without a chimney), which differ in power from 8 to 12.5 kW, as well as several models with a chimney with a capacity of 96 kW.

At the same time, Ukrainian-made solid fuel boilers Aton can operate on coal, wood, peat and briquettes and heat areas from 120 to 2000 m².

Aton has been on the market for over ten years. The advantages of this brand are difficult to underestimate:

1. First, the quality. All parts for the unit are manufactured abroad. We can say that the thermoblock is assembled from ready-made components.
2. Secondly, the price is not overpriced due to the quality. Anyone who chooses a heating system can afford such a unit.
3. Thirdly. A wide assortment range, which makes it possible to choose a unit according to taste and capabilities, as well as depending on the heated area. Small structures with power from 8 to 10 kW, floor-standing power up to 1 MW.
4. Fourthly, the boiler is quite easy to operate. When gas is burned on an open burner, soot is formed. To prevent gas consumption from increasing, it is advisable to clean the burner from time to time. This is not difficult as the front cover can be easily removed.
5. Fifth, a high level of safety and the impossibility of gas leakage. Due to the presence of a draft sensor, there is no need to worry that the gas extraction will return back to the furnace. If the pressure drops, then the automation signals the system shutdown.

Aton's innovations can be seen in the design of some units. The operation of the boilers has changed: the new element supports the combustion of the pilot burner, which accordingly reduces the gas consumption by an average of 13%.

The table below shows some of the popular series of gas boilers from the Aton manufacturer.

Series	Characteristic
Aton ATMO 8-25	Floor-standing gas heating boilers of Ukrainian production of the ATON ATMO 8-25 series are economy class constructions that have an atmospheric combustion chamber. Presented by the names 8ЕМ, 8Е, 8ЕВ, 10ЕМ, 10Е, 10ЕВ, 10ЕВМ, 12.5ЕМ, 12.5Е, 12.5ЕВ, 12.5ЕВМ, 16ЕМ, 16Е, 16ЕВ, 16ЕВМ, 20ЕМ, 20Е, 20ЕВ, 20ЕВМ, 25ЕМ, 25Е, 25ЕВ, 25ЕВМ. Equipped with one and two circuits. The power of the series is from 8 to 25 kW, so the units are capable of heating a space up to 250 m². The efficiency is 90%. They work silently due to natural smoke exhaust, the absence of a circulation pump.The material of the heat exchanger of the structure is steel, plus copper in boilers with a DHW circuit. The nominal gas pressure is 13 mbar. The chimney is 110 mm in diameter. The temperature of the combustible products is 110 ºС. Heating correction in the range of 50-90 ºС.
Aton Atmo 30-50	Ukrainian floor-standing gas heating boilers of this series have a capacity of 50 kW and can heat a room up to 500 m². These are more powerful units compared to the previous ones. Model names: 30EM, 30E, 30EB, 30EBM, 50X, 50XB. They have natural cravings. Noiseless. Equipped with a security system. The material of the heat exchanger of the structure is steel, plus copper in boilers with a DHW circuit. The efficiency is 90%. The nominal gas pressure is 13 mbar. Chimney diameter 145 mm. The temperature of the combustible products is 110 ºС. Heating correction in the range of 50-90 ºС. They do not need an external power source, have an attractive design and a coating resistant to external conditions, and are compact.
Aton COMPACT 7-16	This is a parapet gas unit with a closed-type combustion chamber. Can be installed in houses and apartments. It has a simple structure, attractive design and small dimensions, which allows the boiler to look attractive in any interior. The series is represented by the model range 7E (mini), 7EB, 10E, 10EB, 12.5E, 12.5EB, 16E, 16EB. All boilers have natural circulation. Discharge of combustible products by means of a horizontal flue duct with two pipes through the outer wall of the room. The power of the units varies from 7 to 16 kW. ATON COMPACT is network independent. They are produced in versions with two circuits and one. The efficiency is at least 90%.
Aton Atmo Classic 10–20	ATON Atmo Classic are Ukrainian-made gas floor heating boilers (names 10E, 10EB, 12E, 12EB, 16E, 16EB, 20E, 20EB). Open combustion chamber. They do not depend on the power supply. Suitable for systems with natural and forced water circulation. Series models can have one or two circuits. The capacity of the boilers is sufficient for heating areas of 100, 120, 160 and 200 m². The efficiency is 92%. Thermal power from 10 to 20 kW. Heating regulation in the range of 50-90 ºС.
Aton SAAB 20X-80XB	Models named SAAB - 20, SAAB - 30, SAAB - 40, SAAB - 50, SAAB - 60, SAAB - 80. They have two circuits. They imply natural and forced circulation of the coolant. Heat output ratings are in the range of 20 to 80 kW. Rated voltage - 220/50 V / Hz. The efficiency is at least 91%. Working water pressure - no more than 0.3 MPa Boilers are equipped with security systems.

Now we will consider the models of solid fuel boilers manufactured by Aton from Ukraine.

Series	Characteristic
ATON TRADYCJA	The Ukrainian-made solid fuel long-burning boiler is presented by the TRADYCJA series. Coal or wood is used as fuel. The heat exchanger of the unit is made of steel (steel 6 mm). Compact, but at the same time has a high performance. There is a water grid that allows an efficiency of up to 78%. Boilers ATON TRADYCJA imply combustion with a draft regulator, and units of the ATON TRADYCJA C series are equipped with automatic controls and a blower fan, so that combustion can last up to twelve hours. They have a power from 9 to 38 kW. They are easy to service, have a wide loading door, which makes loading easy.
ATON Multi	Implies manual fuel loading. Its design contains a heat exchanger with a horizontal convection channel (water sticks). The unit has a compact size, but the efficiency is 78%. Fuel can be coal and brown coal, firewood, peat, anthracite. Heat exchanger made of 4 mm steel. Mechanical draft regulator. Series with unit powers from 12 to 20 kW.
ATON TTK	ATON TTK series are cast iron solid fuel boilers of Ukrainian production. They are independent of energy, sectional, burn solid fuels (peat, briquettes, coal, wood) and have an open combustion chamber. The units have a capacity from 21 to 80 kW and an efficiency from 77.6 to 80%. Suitable for residential premises and public areas with forced and natural circulation of hot water heating. Heat exchanger with steel wall up to 6 mm.

Popular models and lines

Consider the most popular models and lines of Aton gas boilers and their technical characteristics. You can buy the presented equipment in Russian online stores or from official suppliers.

Before us is a gas parapet boiler with a closed combustion chamber. The thermal power of the model is 10 kW, which is enough to heat rooms up to 100 sq. m. Despite the absence of complex electronics, the efficiency of the equipment reaches 90% - a decent indicator for a non-volatile model. The primary heat exchanger in this unit is made of steel, the heat exchanger for hot water supply is made of copper. The DHW circuit performance is not very high - only 3.8 l / min, per consumer.

The Aton Compact 10EB boiler turned out to be quite economical. In maximum power mode, it consumes up to 1.12 cubic meters. m / hour. Power is supplied only from the gas main, switching to liquefied gas is not provided.

The model is designed for operation as part of open heating systems with a pressure in the circuit up to 1 atm. The pressure in the DHW circuit can reach 6 atm. Connection is made on the left or right at the customer's choice.

Aton Compact 7U

This model is the youngest in the entire line. The power of the unit is 7 kW, the heated area is up to 70 sq. m. It differs from its fellows in the model line by its reduced dimensions on all planes. The boiler is made according to a single-circuit scheme, a gas main is used for its power supply - this is true for the entire line. The flow rate is up to 0.78 cubic meters. m / hour. Scope of application - heating small private households and country houses.

The maximum power of gas boilers in the Aton Compact line is 16 kW - the series includes single-circuit and double-circuit models.

This series includes gas boilers equipped with open combustion chambers. They are connected to traditional chimneys overlooking high roofs. The range includes models with one and two circuits, heat output ranging from 8 to 25 kW. Italian mechanical automation units are responsible for maintaining the specified operating modes.

Gas boilers Aton Atmo are distinguished by quiet operation - they have no electrical components, and the fuel is burned on a silent burner. Ignition is carried out using a small igniter that burns on a constant basis.

Users just need to check the level of the coolant in the system, turn on the gas supply, click the button to ignite the igniter and set the required temperature in a particular circuit.

The primary heat exchangers in Aton Atmo gas boilers are made of steel, the secondary ones are made of corrosion-resistant copper. The efficiency is up to 90%, the coolant temperature varies from +50 to +90 degrees. Operation as part of systems with forced circulation is not allowed - the maximum pressure in the heating circuit should not exceed 1 atm. The maximum productivity of the DHW circuits is 5 l / min at ∆t = 35 degrees.

Also in production there is a line of gas boilers Aton Atmo 30-50 with increased power and two circuits.

The gas boilers presented in the line can operate in systems with natural and forced circulation. Their power ranges from 20 to 80 kW. Scope of application - heating residential and non-residential premises and buildings with an area of ​​up to 800 sq. m. All models in the line are single-circuit, the heating medium temperature is up to +95 degrees. The efficiency indicator is up to 91%. The equipment requires an electrical connection, the power consumption is no more than 20 W / h.

This advanced line from the manufacturer Aton (trade mark INTERGAS) is represented by gas condensing boilers. The power of the models varies from 24 to 46 kW. Features of the lineup:

• Electronic control.
• Wall mounting.
• Wide range of power adjustment.
• Forced removal of combustion products.
• The need for condensate drainage.
• Increased efficiency factor (up to 10-15% savings on gas fuel consumption).

The equipment is designed to work in closed heating systems. Electricity consumption is 105-190 W / h, depending on the capacity of the gas boiler.

Aton (Aton), which will be discussed in the article, are intended for domestic and industrial use. The buyer has the opportunity to choose a model with optimal performance, in wall-mounted or floor-standing, single or double-circuit versions.

Gas boiler ATON Atmo 16EB

Proskurov

Proskurov is a Ukrainian company that produces boilers for space heating and hot water supply. The products are popular among consumers due to their high quality and reasonable prices.

The boilers have versatile functions, they are economical in the use of fuel.

Proskurov units are of excellent quality, high efficiency and a 100% manufacturer's guarantee.

All boilers of the Proskurov company have safety automation with a gas valve (from the German manufacturer Honeywell).

The manufacturer produces gas, solid fuel and electric boilers.

Gas units are presented in two types: parapet boilers and chimney.

Solid fuel boilers are divided into categories: with and without a fan. There can be designs with a plate (AOTV-K with a plate).

Some popular models are discussed in the tables below.

Gas boilers

Series	Characteristic
Parapet gas boilers Proskurov	A number of models consist of the names AOGV-7, 10, 10U, 13, 13U, 16U. They have a closed combustion chamber, do not require electricity, and are equipped with a vertical chimney. Oxygen supply to the combustion chamber and removal of impurities is carried out through special ducts outside the building.
Chimney gas boilers Proskurov	These are gas boilers of Ukrainian production, represented by the models AOGV-10V, 13V, 16V, 24V, 30V, 50V, 98V. They are double-circuit, floor-standing, have built-in pneumatic automation (they are not afraid of electricity drops).

Solid fuel boilers

Series	Characteristic
Proskurov AOTV with a fan	Models of this category AOTV 16, 22, 28, 34, 40, 50, 75, 100, 150. The boiler runs on solid fuel, namely wood, wood waste, peat, coal, pellets. The raw material should be fed into the furnace every 8 hours on average. Suitable for heating areas from 160 m² to 1500 m². The weight category of boilers is from 220 kg to 750 kg.
Proskurov AOTV-N without fan	Presented by models AOTV-12N, 16N, 22N, 30N, 40N, 50N. They are safe to use. Designed for heating not only apartments, but also houses outside the city, cottages. Suitable for heating areas from 120 m² to 500 m². The weight category of boilers is from 120 kg to 240 kg.

Model overview

SAAB 20 X-80 XB

Models of the SAAB series are available in a range of powers from 20 to 80 kW. Low-power ones can be installed in private houses, high-power ones - in industrial and social facilities. The connection of an additional attachment is provided - to remove the combustion products. Suitable for old and new heating systems. The efficiency is 91%. Weighs 95-230 kg. Modifications with horizontal and vertical chimneys are available. To adjust the gas supply and temperature, there is a control panel on which there are - a thermomanometer, thermostats - operating and emergency, LED indication.

COMPACT 7-16

Parapet type. For rooms without chimneys. Gas outlet - through a two-pipe smoke and air outlet. Heating capacity - 7-16 kW. 8 modifications. Non-volatile. Install them near the wall facing the street. There are one- and two-circuit. In double-circuit - a copper coil for heating water. Weight - 35.5 - 60 kg.

ATMO CLASSIC 10-20

Floor-standing devices.Heating capacity - 10, 12, 16 and 20 kW. The efficiency is 92%. Weight 43-72 kg. The combustion chamber is open type. For any system - with natural and forced circulation of the coolant. Single and double-circuit. The latter have a summer mode - for heating water in the summer. Heats rooms from 100 to 200 sq. M. Italian burners POLIDORO and gas automatics EUROSIT.

Danko

Danko has been on the market since 2002.

In the model range, you can see solid fuel boilers with a capacity of 12.5 to 50 kW. They all have an individual design and quality. There are several gas-fired options. Wall-mounted units have a capacity of up to 23 kW, parapet units - 7-15.5 kW, floor-mounted units - 96 kW.

The Danko company provides a quality guarantee for its products up to three years and guarantees high productivity up to 91%.

Popular series of Danko gas boilers are discussed below.

Series	Characteristic
Danko - 23 VKE / Danko - 23 3KE	These are medium-class Ukrainian-made gas boilers with a capacity of 23 kW. They have two circuits. Installed on the wall. They have an open and closed combustion chamber, as well as two heat exchangers (the main one is a copper heat exchanger for heating water in the heating circuit, the secondary one is a stainless steel plate heat exchanger for supplying hot water). The series has compact dimensions, modern attractive design. They function perfectly at reduced pressure up to 2 mbar. The design is equipped with electronic ignition, anti-freeze function.
Steel gas boiler Danko	The series is presented in a wide model range with a power range from 8 to 24 kW. The letter "B" means that the boiler has the function of heating water. The letter "G" means that the boiler has a horizontal flue. There are both single-circuit and double-circuit models. 3mm steel tubular heat exchanger. The average efficiency is 91.5%.
Cast iron gas boiler Danko	This is a series of gas floor boilers with a cast iron heat exchanger. They have an open combustion chamber and one circuit. Model capacities vary from 16 to 50 kW. The working pressure reaches 0.2 MPa. The temperature of the coolant at the outlet is up to 90 ° С. The models are characterized by high heat dissipation, resistance to rust and a long service life (over 25 years). The efficiency is 90%. Danko's cast iron gas boilers operate in open and closed water heating systems, with forced and natural circulation.

The following are Danko solid fuel boilers.

Series	Characteristic
Danko-TL	The lineup includes nine items. All boilers run on solid fuels, namely coke, wood, coal. You can also use shavings, pellets, sawdust, peat briquettes. The units are designed for heating rooms up to 470 m², in systems with forced and natural water circulation. The series is easy to operate and maintain. The service life can be up to 25 years. The solid fuel boiler of Ukrainian production has a durable cast-iron heat exchanger, a water-cooling grate. The efficiency is at least 75-80%
Danko-TN	This long-burning solid fuel boiler of Ukrainian production has a steel heat exchanger and operates on solid raw materials, namely peat, wood, coal. The model range includes four items with capacities from 12.5 to 27 kW. The service life of the units is more than 15 years.
Danko-T	The lineup is represented by three items. These are Ukrainian solid fuel boilers with a steel heat exchanger. Raw materials used: anthracite, coal, wood. The units have a modern design, are distinguished by their reliability and quality. The total heating area is 720 m². Designed for heating individual houses and other areas.
Danko AKTV	This is a solid fuel boiler, represented by the Danko AKTV-15 and Danko AKTV-20 models. Has a steel heat exchanger, cast iron cooking plate. Wood, coal, anthracite are suitable as fuel. The total heating area is up to 200 m². The special design allows you to adjust the cast iron grate to different levels and use the boiler rationally, depending on the season outside the window.

Installation of double-circuit heating boilers

The main units of the design of the units under consideration are:

• heat exchanger;
• burner;
• the combustion chamber;
• automatic control.

The material for the production of the heat exchanger can be cast iron, copper, steel or aluminum. Each material has its advantages and disadvantages. Steel elements have high heat transfer, have higher strength than cast iron, but are afraid of water. Cast iron assemblies are durable, inexpensive, strong, but heavy, which limits installation options. Copper and aluminum assemblies have a high degree of heat transfer, they are not afraid of corrosion, and withstand mechanical stress. However, these are fusible materials and they will not be able to provide high power.

The main function of the burner is to generate heat to heat the heat carrier in the system. Above the burner there is a heat exchanger, inside of which the heat carrier is located.

Ross

Manufacturer Ross has been producing products since 1991.

A wide model range is represented by brands of boilers operating on solid fuel (power from 16 to 100 kW, heat exchangers made of cast iron or steel), gas fuel (power up to 96 kW, depending on the floor or wall construction), and electricity.

The main advantage of Ross boilers is their safety and ease of use. The company is focused on the production of reliable and at the same time attractive in appearance units.

On gas

Series

Characteristic

Ross AOGV

The series is produced in floor and wall versions. Floor-standing gas boilers Ross do not depend on the electricity network, they have two circuits. They are economical and autonomous. They can have a steel ("Lux" and "Premium" class boilers) or cast iron heat exchanger. All units have distinctive features and advantages, long service life. Wall-mounted gas boilers Ross can be with one circuit (for heating only) and with two circuits (for heating and hot water supply), with an open and closed combustion chamber. They have a low price. They heat both apartments and private houses, production workshops, residential complexes.

Solid fuel

Series	Characteristic
Ross KOTV-S	Boilers of the KOTV-S series are units with a steel heat exchanger designed to provide heat to residential buildings, utility rooms and workshops. Models of the series are represented by the names KOTV-15-S, KOTV-15-S-V, KOTV-20-S, KOTV-20-S-V. Where the number is the rated power, the letter "C" stands for the steel heat exchanger, "B" stands for the hob. The coolant temperature is 90 ° C. Working pressure - maximum 130 kPa. There is a possibility of cooking (there is a hob available). The efficiency is at least 75%.
Ross KOTV with automatic temperature control	The model has a steel heat exchanger that automatically maintains the coolant temperature. Heats workshops, residential buildings and other objects. It can work with natural and forced water circulation system and with pressures up to 200 kPa. It uses wood, brown coal and briquettes as raw materials. There is a possibility of heating with coal. The efficiency is up to 78%. The large volume of the loading chamber leads to a longer combustion process. The model is easy to maintain.
Ross KOTV-30	It can work in closed and open heating systems, with forced and natural water circulation, with an excess pressure of up to 200 kPa.Peat briquettes, wood and wood chips briquettes are used as fuel. In a closed system, wood pellets, lignite and hard coal can be used. Boiler power can be changed within the range of 10-35 kW. The efficiency is up to 80%. The heat exchanger is enlarged, made of steel 3 mm thick.

Thus, there is a large selection of Ukrainian-made boilers on the market. They operate on various types of fuel, have different technical and economic characteristics.

Popular models and lines

Floor-standing gas boiler Aton 10E of the Atmo series, which is quite popular in the market of heating equipment. This is a single-circuit unit (only heats the room) with an open combustion chamber and chimney. There is an Italian Eurosit automatic equipment.

Another model is the Aton Compact 7U, the youngest in the entire line. The power of the unit is only 7 kW, which is enough to heat a room up to 70 m². A distinctive feature of the boiler is its reduced dimensions in all planes. The unit is single-circuit, designed to equip private households and country houses with heat.

Gas parapet boiler Aton Compact 16EB

Popular series - Aton SAAB. The gas boilers presented in the line can operate in systems with natural and forced circulation of the coolant. Their power varies within 20-80 kW. Units are used for heating residential and non-residential premises and buildings with an area of ​​up to 800 m². All boilers of the series are single-circuit, with a liquid heating temperature up to +95 ° С. The efficiency tends to 91%. To operate the heater, it must be connected to the power supply, the power consumption is max. 20 W / h.

Floor-standing gas boiler Aton SAAB-96

And one more line in demand - Aton Kombi Kompakt HRE. Presented by hinged gas condensing boilers. Model power from 24 to 46 kW. The line is distinguished by the presence of electronic control, a wide range of power adjustments, a system of forced removal of combustion products, the need for condensate drainage. The boiler has a high efficiency factor (up to 10-15% savings on gas fuel consumption). The technique works in closed heating systems. The consumed electrical energy is 105-190 W / h, depending on the power of the unit.

Ukrainian gas heating boilers Aton are designed for domestic and industrial use. The buyer has the opportunity to choose the model with the maximum performance, in wall and floor versions, as well as equipment with one or two circuits.

Parapet equipment Aton

The design of a parapet boiler is in many ways similar to the design of condensing equipment. The main difference from similar atmospheric equipment is the presence of a closed combustion chamber. As a result, the air consumed during gas combustion enters the furnace not from the room, but from the street. The Aton gas parapet boiler is connected to a horizontal coaxial chimney.

As a result of such a device, the efficiency and efficiency of the equipment increase, and the possibility of environmentally friendly combustion of gas is achieved.

Some parapet gas heating boilers Aton, in addition to the traditional heat exchanger, have a built-in convection casing, which allows heating the room with greater efficiency. Attached models of parapet equipment are mainly volatile and cannot work without electricity. Floor-standing versions are non-volatile.

Aton boilers and their key features

Gas boilers Aton are presented on the market in floor and parapet models. They are manufactured with state-of-the-art equipment and meet stringent quality and safety requirements. In one year alone, about 100 thousand units of production leave production.Boilers are sold not only in Ukraine, but also in other countries (in particular, in the CIS countries).

The main features of the Aton boilers:

• Italian components - Italy has always been famous for its excellent heating technology. Today it is a component supplier for many boiler manufacturers.
• Long-term manufacturer's warranty - it is 5 years from the date of sale.
• Efficient heat exchangers - provide quick heating of the coolant in the system.
• Modern design - floor and parapet boilers Aton quite successfully compete with their European counterparts.
• Affordable prices are a great way to save money on the purchase of heating equipment.

Floor-standing gas boilers Aton are presented in modifications with one and two circuits. Regardless of the number of circuits, they do not require an electrical connection. This opens up the possibility of operating the equipment in buildings that are not connected to power grids.

They are built according to a scheme with open combustion chambers; heat transfer to heating systems is carried out using steel heat exchangers.

Parapet gas heating boilers Aton are divided into single-circuit and double-circuit. Their installation is carried out close to the wall, with the release of combustion products behind the same walls. The combustion chambers in them are of a closed type. Due to the short chimney and well-thought-out design, the equipment does not need to be connected to a power source.

Wall mounted boilers

This category includes equipment designed for simultaneous heating and hot water heating. The two-circuit wall-mounted gas boiler Aton is distinguished by a number of technical features that affect its operation:

• The heat exchanger is made of special steel and has a thickness of 3 mm.
• The design of the heat exchanger provides for the use of fire tubes of a special profile, which allows to increase heat transfer by 15%.
• Aton gas double-circuit hinged boilers use a silent burner. Small size and compactness, absence of extraneous noise during operation makes it possible to install equipment without the use of additional sound insulation.
• The burner is manufactured in England, and the automation of the Aton boilers in Germany and Italy.

Varieties

Parapet

A parapet or chimneyless boiler is structurally similar to condensing appliances. A distinctive feature is a closed combustion chamber. Oxygen consumed during fuel combustion enters the furnace from the street. A horizontal coaxial chimney is connected to the device. It is characterized by high efficiency and environmental friendliness. Economical consumption of energy resources. A number of parapet versions, in addition to the usual radiator, have a built-in convection casing - for greater heating efficiency. The manufacturer offers parapet models:

Wall mounted. Mostly volatile - they need electricity to function.

The floor version is non-volatile.

Hinged

Designed for space heating and water heating. Technical features of double-circuit models:

Steel heat exchanger. Thickness 3 mm.

Smoke tubes are used from a profile - heat transfer increases by 15%.

Silent burner (made in England).

Automatic block - Italian and German.

Compact size and quiet operation eliminates the need for additional sound insulation. The manufacturer's basic equipment includes an expansion tank, a circulation pump, an automatic unit and a security system.

Floor standing

The stationary Aton unit is designed for heating large areas. It can have a capacity of up to 1 MW - this is exactly the power that one of the newest modifications of the Aton trademark has. For ease of selection, floor-standing versions can be divided into three groups:

2 contour. They are connected to heating and hot water supply. The water is heated in a copper plate radiator.

Single-circuit. For heating only. They can be equipped with a built-in boiler or connected to a storage device. They need electricity.

Non-volatile. These water heating stations are distinguished by their constructive simplicity. They do not need electricity. They are connected to heating, in which the coolant circulates without compulsion. Chimney floor version. There is an atmospheric burner - air circulating in the room is consumed for operation.

The latest models have design adjustments - they do not need an ignition burner for combustion. This solution allows to reduce the consumption of blue fuel by 10-15%.

All modifications meet safety requirements. The maximum allowable water vapor pressure is 0.07 MPa. The maximum liquid temperature is 115 degrees.

Floor heating equipment

Stationary boilers Aton are efficient and powerful installations with a capacity of 16 kW and above. One of the latest developments of the company is capable of operating with a power of 1 MW.

All proposed modifications can be roughly divided into several types:

• Gas floor-standing double-circuit boiler Aton - designed for connection to the heating system and hot water supply. Water heating is carried out using a plate-type copper heat exchanger.
• Gas heating single-circuit boiler Aton - connection to heating is provided. Some models are supplied with a built-in boiler. Others, at the request of the customer, can be connected to the indirect heating accumulator. Requires an electrical connection.
• Aton non-volatile floor-standing gas heating boilers are simple water heating stations in design. Does not require connection to the power supply system. They are connected to a heating system with natural circulation of the coolant. The Aton chimney floor-standing non-volatile gas boiler has an atmospheric burner and uses indoor air to operate.

Benefits of the Aton brand

Ukrainian-made boilers AtonMASH are of high quality due to the fact that only imported components are used in the production of equipment. In fact, the company simply assembles a thermoblock from ready-made parts. It is for this reason that the technical characteristics of boilers are often not inferior to European expensive counterparts. What are the benefits of this?

• Low cost.
• High quality of units - the operating mode of the automation allows you to accurately set the required temperature regime and reduce gas consumption. The heat exchanger is made from sheet steel by cutting on Finn-Power punching presses, followed by welding in a mechanized way, which ensures the integrity of the seams even during maximum heating.
• Performance - equipment for any heated area is presented. Small compact stations can generate 8-10 kW. High-performance floor-standing units have a capacity of up to 1 MW.
• Ease of operation - during the combustion of gas, soot appears on the atmospheric burner. Over time, as it becomes clogged, this affects the performance of the device, significantly increasing the gas consumption. The burner is easy to clean. The front cover is removable for access to the most important parts.
• Service maintenance - the simple principle of the boiler does not require much effort and time to keep the device in good working order. It is enough to check the operation of the equipment, no more than 1-2 times a year. At this point, you can adjust the gas supply and carry out other repair work.
• Safety - the principle of operation of the draft sensor helps to prevent situations in which the exhaust gases are returned to the firebox under a gust of wind. When the gas pressure drops, the automation gives a signal to turn off the system. Gas leakage is excluded.

What to look for when choosing a boiler

When choosing an Aton boiler, you should pay attention to the following parameters:

1. Dependence on electricity.
2. The presence of a DHW circuit or built-in boiler.
3. Required performance.

Aton boilers do not have many of the functionality that European and Japanese manufacturers advertise. But if you need to purchase a high-quality and safe boiler at an affordable price, then you cannot find a better option.

How to choose an Aton boiler?

Before purchasing a gas boiler Aton, you need to familiarize yourself with its features and decide on the following parameters:

1. Boiler characteristics. Depending on them, the indicators of the system are determined. For example, if you need a heater for a small apartment or house, it makes no sense to purchase a high-power unit, and vice versa. In addition, you can choose a hinged or floor version, for a boiler room or for a kitchen, with and without the obligatory connection of a chimney.
2. Compliance with your system. Certain models have an entrance on the right and an exit on the left, therefore, when connecting, it is important that your heating system has inlet and outlet pipes in the same places. There may be an alternative - universal Aton units with branch pipes that can be connected to any system.
3. Cost. As a rule, you have to pay for the quality. But if you are an adherent of imported equipment, think about who will repair it when a malfunction occurs, and how much the parts will cost. Ukrainian-made boilers are much cheaper, and the quality is quite high to compete with foreign models.
4. Ease of operation. All new heating models are equipped with a display showing the entire "life" of the boiler: its main parameters, temperature and information about breakdowns. This makes it much easier to use the unit, but the equipment can not always tell where a malfunction, short circuit or control error has occurred. Aton gas boilers are designed to minimize situations where it is difficult to determine the cause of a breakdown. A working model can independently restart in the event of a power supply update and turn off on its own in case of failures, which makes the task much easier. In addition, modern equipment can adjust the level of the burner device to stabilize a specific temperature.
5. Service and guarantees. The manufacturer gives a three-year warranty for its products. In addition to high quality, the choice is always in favor of discounts, a long warranty period and free maintenance. Therefore, most stores try to sell older models at a discount.

General information about Ukrainian gas boilers

Functional gas boilers of Ukrainian production, the price of which depends on the model and specification, are distinguished by ease of operation and ease of adjusting the settings. They can be installed on the floor or on the wall in the kitchen, boiler room or in any other room. Although Ukrainian gas heating boilers may have structural differences, they all work according to the same principle. They need natural gas as fuel, which is used to heat the coolant. When the gas enters the sealed combustion chamber, its energy is transferred to the coolant, then the liquid, using circulation equipment, moves through the radiator system and contributes to heating all rooms in the building.

Correctly selected Ukrainian-made gas heating boilers will become an effective, reliable and functional element of a home heating system. To choose a successful boiler, you need to familiarize yourself with the current offers on the market presented by Ukrainian manufacturers of heating equipment, as well as outline the main structural and functional differences between various models.

Differences in the range of Ukrainian manufacturers

Gas heating boilers from Ukraine are offered in a wide range and with a lot of differences, which will allow each customer to choose a model according to their own requirements and needs.

The buyer is offered single-circuit devices designed exclusively for heating premises, and double-circuit ones - capable of heating the room and at the same time heating water for the convenience of residents.

Models are available with different installation types.

A large selection of manufacturers will simplify the decision-making - every company that offers gas heating boilers has advantages that can interest the buyer.

Among the major manufacturers, we will name the following:

• ATON is an enterprise on the territory of Ukraine that offers products in the domestic and international markets. Gas boilers from this manufacturer are economical and highly efficient;
• ATEM is another large Ukrainian and world manufacturer offering cheap but high quality products;
• Danko is a company specializing in heating equipment: boilers with various types of fuel, convectors, etc .;
• Mayak is a large Ukrainian plant that has been producing boilers for a quarter of a century;
• Colvi-Thermona - offers cheap and popular models in the CIS countries;
• Thermo-Bar is a successful combination of Czech and Ukrainian production, it launches high-quality, reliable and durable devices on the market;
• Ross is a diversified association that is also engaged in the production of reliable gas boilers.