A simple solution for a bath: installing a Kutkin oven

Sauna stove models from the manufacturer Kutkin

Kutkin 1.0 Standard

• Kutkin 1.0 Standard. It is used for rooms with cubic capacity up to 10m³. The body is made of heat-resistant 2mm steel. Transparent tempered glass panoramic doors allow you to enjoy the view of an open fire. Cladding with natural material (stone) is possible.
• "Kutkin 1.5 Standard". It is used for rooms with cubic capacity up to 18 m³. The improved stove runs on any fuel, be it wood or gas. If necessary, you can use only the upper combustion mode and to save heating costs. Automatic control of room heating allows you to maintain a comfortable temperature.
• "Kutkin 2.0 Standard" with an enlarged firebox is used for rooms with a cubic capacity of 25 m³. The model is equipped with an economizer and a fuel channel.
• "Kutkin 1.0 Economy" stands out from the model range by the presence of a hinged tank. The model itself is small in size. It can heat up a volume of up to 12 m³ cubic capacity. It is fashionable to cover the body with refractory stone tiles along special guides.
• "Kutkin 1.5 Economy". It is used for rooms with cubic capacity up to 18 m³. Gaseous fuel burner, refractory facing stone and economizer are available. The firebox door can only be opened from the steam room.
• "Kutkin 2.0 Economy". The stove has a water tank, it is possible to switch to gaseous fuel. It is used for rooms with cubic capacity within 25 m³. Wide fuel channel - 250 mm.
• "Kutkin 3.0". Such an automated bath can operate in different modes (they were listed above). Modes can be changed in 10 minutes. Heats up to 35 m³.

Ready-made sauna with a stove What else can you tell about Kutkin's sauna stoves. They are distinguished by high reliability of construction and boast a wide range of products. Any model from the "standard" series has a guarantee of up to two years, and the service life of the furnaces reaches ten years. In general, such ovens have a whole list of advantages:

• The Kutkin oven is easy to install.
• The light weight does not create any problems during transportation - it can be transferred even by one person!
• High quality materials used in production - durable chrome-plated steel is not afraid of moisture or high temperatures.
• Fuel consumption is almost three times less than in other designs.
• Kutkin furnaces can operate on any fuel - gas, solid and diesel fuel to choose from.
• Several operating modes.
• Compact dimensions.
• Affordable price.
• Fire safety.
• Heating the room heating water for washing.

A modern bathhouse with a Kutkin stove is capable of satisfying the needs and wishes of the requirements of even the most demanding user.

At first glance, the appearance and layout of the updated furnace structure of the updated firebox is not much different from the well-known Hami or Teplodar. The same steel body with stone cladding, vertical chimney and a tunnel method for loading firewood into the firebox.

Nevertheless, the Kutkin sauna stove has its own characteristics and secrets. The main emphasis by the developers was placed on the rational use of the heat released during the combustion of firewood. Therefore, the main feature is that the Kutkin system is a sauna stove with a closed heater:

• Most of the container with a rocky backfill is hidden inside the furnace body under the top cover;
• The second part of the stones is placed in a stainless steel mesh economizer on the chimney;
• A cylinder for heating water can be installed between the economizer and the top cover on the chimney pipe.

For your information! The total weight of the filled stone is 65-70 kg, which is a lot for such a light furnace as the Kutkin system. The dry weight of the structure itself, depending on the version and model, ranges from 55 to 68 kg.

Undoubtedly, the solution is a good one, especially if the owners need to equip a winter bath at their summer cottage. In this case, one physically strong person is quite capable of delivering the stove to a suburban area and installing it in the bathhouse.

We suggest you familiarize yourself with: Russian bath in Japan

It is clear that the Kutkin stove is not bought because of its low weight, although this is also important, especially if the firebox has to be transported, installed and removed twice a season. According to the owners, the Kutkin sauna stove is primarily valued for two characteristics:

• The versatility of the heating part of the furnace, it is easy to reconfigure it in any of the temperature regimes, while there is no need to dismantle or reconfigure the Kutkin combustion chamber;
• The sauna stove turned out to be very "evil", reaching the nominal thermal power of 20 kW is obtained in just 20 minutes.

A powerful heat flow through very thin stainless steel walls is able to warm up a wooden bath frozen in frost in a couple of hours. It is clear that it is practically impossible to take a steam bath in conditions when the “bare” Kutkin furnace firebox is operating at full capacity, so the developers have provided the body with two protective screens.

Reasons for the popularity of the lineup

The use of a closed heater is one of the key advantages of this equipment. This design makes it possible to put stoves in Russian baths, which are quite capricious regarding the maintenance of temperature and humidity conditions. In addition, the stove is conceived as a multifunctional equipment that can recreate the microclimate of other types of baths with a thousand-year history.

The units are unique, as they are capable of operating on any type of fuel - gas, wood, diesel. The main management tools are implemented without binding strictly to the right or left side, which allows them to be mounted at your own discretion. When compared with other common models of sauna stoves, here the fuel consumption is almost three times lower.

The equipment can have a unique design, since at the customer's request such aesthetic materials as granite, ceramics, jadeite, talcochlorite are used in its facing. The steel contains up to 17% chromium, which provides an impressive service life and high quality models.

The reasons for choosing the Kutkin ovens:

• compactness,
• fire safety,
• the ability to implement without reworking the finished project,
• convenience of heating any area,
• affordable cost,
• operational reliability,
• production of light steam,
• the possibility of installing an additional tank for the concomitant heating of water,
• high quality assembly and raw materials, use in the production of European components that provide control.

It is important that the modifications are easy to install, they do not need laborious revision, all work can be done alone

Design features

If you look inside the furnace body, then for a knowledgeable person no special tricks will be found in the device of the combustion chamber. The Kutkin furnace is arranged according to the classical scheme, but you still need to take a closer look at its device.

In the central part of the body there is a combustion chamber with beveled walls. The firebox itself does not represent anything special, the usual trapezoidal contour with a cast-iron grate.

Characteristics of the most common model for firewood Kutkin 2:

• The maximum heat dissipation power is 20 kW, this is enough to warm up a steam room of 16-18 m3 or 10-18 m2 of a bath room;
• Case dimensions - 900x50x45 cm, taking into account the economizer grid, the height is 1400 cm;

  

  Read also:  Sand with clay is much better to use.The use of clay for waterproofing is a time-tested solution or a relic of the past
• The length of the combustion chamber allows the use of logs no longer than 45 cm.

In the furnaces of the Kutkin system, there are always heat exchangers for heating water. They can be built into the body above the loading tunnel or cut into the chimney, the boiling water fittings are ¾ inch.

For your information! The Kutkin heating system has one feature, you need to choose a stove for a bath immediately, planning the power of the combustion chamber for a specific volume of the steam room.

Trying to alter, simplify or reshape, trying to rebuild the wood-burning model into the Kutkin gas oven means to spoil and destroy with your own hands a rather complex and heat-loaded structure.

Most of the parts of the furnace and stove are welded from steel 403 by argon welding, but even in this quality, accidents and destruction of seams on the stove occur at maximum combustion modes. Therefore, any alteration, as in the video, will not lead to anything good.

The gas stove for the Kutkin bathhouse differs from the wood-burning model, first of all, in the size and height of the combustion chamber. As in all stoves for a bath, assembled from thin sheet stainless steel, the shape and method of fastening the firebox remains a weak point for the Kutkin system.

When heated, stainless steel expands greatly, so the developers produce Kutkin furnaces, in which the furnaces can be mounted with slight differences.

In the first case, for gas models, the rear part of the combustion chamber is fixed without slots, tightly fitting to the rear wall of the body. In the second case, for Kutkin wood-burning furnaces, there is a gap through which air circulates, cooling the parts of the stove.

The steam-generating chamber under the stone backfill looks more interesting. Its shape and dimensions are made in such a way as to maximize the removal of heat from the combustion products and at the same time not interfere with the movement of flue gases.

Unlike the usual open structures, in the Kutkin stove the stove is closed with a removable lid. If necessary, it can be easily opened by sliding the handle on the runners to the side.

Such a device avoids excessive release of hot water vapor into the heated atmosphere of the bath. The vertical chimney shaft is always equipped with an economizer filled with rolled jadeite, which increases heat transfer and simplifies the heating of the bath at the initial stages of the Kutkin firebox.

We suggest that you familiarize yourself with: How to make a fluff in a bath

It can be said without exaggeration that the Kutkin stove is one of the hottest existing models of boilers and sauna stoves. The developers recommend not to overload the stone container with an excessive amount of backfill, since when heated, the material expands and can break the welding seams in the wall area.

The temperature inside the stone backfill easily reaches 300 ° C, so the upper tier of the hull literally gets red-hot. The walls of the stove have to be shielded from the most powerful infrared radiation with one additional steel false casing made of stainless steel and a diffusing lining made of stone - a coil.

Installation of the stove in the bath

No special tools or preparation is required to install the Kutkin lightweight welded structure. It is enough just to correctly equip the walls and heat-resistant base. These requirements must be treated with utmost care.

Directly under the ash pan of the stove, the air temperature easily overcomes the level of 200 ° C, therefore, it will not be possible to simply lay a sheet of metal as insulation; to heat the Kutkin system, you will need, at least, additionally lay a protective layer of sheet vermiculite.

The hottest section of the chimney pipe of the furnace is closed with an economizer, which makes it possible to refuse thermal insulation in the lower sector of the chimney.At the same time, due to the efforts of the developers, the pipe turned out to be close enough to the wall, so the Kutkin stove can be installed in the bathhouse only in a brick opening.

The outer stone screen is fixed to the Kutkin furnace body by means of horizontal guides. This makes it possible to transport the sauna stove without cladding, the tiles can always be removed for repair or replaced with a cheaper porcelain stoneware.

Since the dimensions of the heating unit are small, it will easily fit in a small steam room. Customers are offered a choice of models for installation in a steam room or with a remote firebox for an adjacent room.

Model with a remote firebox for an adjacent room

Doors can be of a regular format or wide - fireplaces. The cladding is made with soapstone, coil, jadeite or without cladding at all. The branch pipe is shifted forward relative to the center, so it will be close to the wall, which implies the need for thermal protection of this section of the wall - for this you can use basalt cardboard and a sheet of rolled metal.

Also, the design of the Kutkin furnace assumes the presence of an economizer - this is a grid with stones and a vaporization system. It is arranged around an inner stainless steel tube. By the way, the economizer can be placed on the side of the wall, which simplifies the process of thermal protection of the wall.

Stove for a bath in the installed form - Kutkin's model

As for water heating, it is heated in two ways - on the pipe and inside the furnace using a heat exchanger. The first option is more efficient, while the second option can be used as a backup.

The internal structure of the model is quite simple, and the external finish is a double casing, lined with natural stone, however, the lining is optional. Also, the design provides for a closed heater with a lid and a mesh, which is filled with fine stones, like an economizer on a pipe.

If we consider the functionality of Kutkin's heating equipment, then such a stove for a bath can be used in several modes:

• Like an infrared lamp, that is, with radiation in the infrared range and a low temperature.
• Low temperature conditions (up to approx. 40 ° C and humidity up to 90%) can be created.
• Third. An ordinary Russian steam room: temperature up to 70 ° C, humidity in the range of 40-70%.
• A hot sauna with dry air, the temperature in it is up to 90 ° C, and the humidity is only up to 15%.

Conveniently, the user can easily make all these modes on the stove without any additional finishing touches. To obtain the necessary humidity and temperature conditions, you just need to choose the right mode - then the model will support it. The unit itself can operate on any fuel - solid or gaseous, which is very convenient.

We suggest that you familiarize yourself with: River stones for a bath how to choose

Reviews of the gas furnace of the "Standard" series

If you need a sauna stove, you may prefer the gas model, which belongs to the "Standard" series. Consumers note that this option consists entirely of heat-resistant steel, with the exception of the fuel channels and legs. The firebox is made of 2 mm steel, and the lid is made of 1.5 mm sheet. Consumers like the fact that an additional burner can be installed in the fireplace insert.

Structures are made with vertical and horizontal guides for tiles. But if you want to finish with jadeite, then you should prefer stoves with horizontal guides. Some consumers, unfortunately, cannot afford this equipment. However, they note that the price of 86,200 rubles. worth it. If you have additional funds, you can purchase a food economizer with a heat exchanger. It will cost 8700 rubles. When it is planned to finish the stove with a coil, the appropriate finish is purchased. The manufacturer offers it for 15,200 rubles.

Installation of the Kutkin oven

The installation process is not difficult.It can be performed without special skills and experience, and even more so without hired specialists. What you need:

1. Installation is carried out, with rare exceptions, into any wall, due to the presence of a telescopic fuel channel - if necessary, it can be made longer up to 25 cm. But this option is not available in every stove - it is worth clarifying this when choosing a model. A fireplace or a regular door, if desired, can be taken into the next room. In order for the stove to operate on gaseous fuel, you will have to install a special flap, while the connection of the nozzle passes through the fuel channel.
2. If the customer chooses such an option as finishing with stone or other material, then the tiles are sent ready for assembly - it is not particularly difficult to perform facing with ready-made fragments.
3. The storage tank for hot water is attached using threaded hardware. It can be connected from the side or transferred to another room.
4. The designers placed the heat exchanger outside the case, namely, in the area of ​​the economizer.
5. We connect the Kutkin oven to a source of gaseous fuel. To do this, you need to have an appropriate project and solution available, for which you will have to contact the Gas Industry Service. And then you can heat the firebox with gas or, as before, use firewood.
6. The Kutkin furnace does not imply the arrangement of a fireproof concrete base with reinforcement for the bath. A clay screed will be sufficient. And on it you can safely lay out a layer of refractory chamotte. If the surfaces in the bath are lined with ceramic tiles, then you can do without a layer of chamotte.
7. In order to remove exhaust gases from the furnace, an economizer is used, which allows you to lower the temperature of the exhaust gases and increase the efficiency. The main thing is to provide thermal insulation of the pipe in order to minimize condensation.

Advantages and disadvantages

Let's talk about the pros and cons of the Kutkin oven. This information is formed not only as a result of the manufacturer's analysis, but also on the basis of customer reviews.

The benefits include:

• the presence of various modes of operation of the furnace, including low-temperature;
• the possibility of converting a wood-burning stove into a gas one with minimal investment;
• ease of use;
• modern appearance, which is not inferior to foreign models of stoves;
• fuel economy by an average of one and a half times;
• high quality materials, which makes the Kutkin ovens durable.

We will also tell you about the cons in detail. You can identify them during operation:

• Narrow range of flame intensity adjustment, as a result of which the stove can be easily overheated. It is possible to achieve a moderate mode, but this requires gaining experience in operating the furnace, and this takes time.
• Some owners consider the lack of a cannon for steam to be a significant disadvantage.

Some stove owners noted that the stove sags over time, but this cannot be considered a regularity. The stove is really versatile, it has proven itself well among the residents of the Novosibirsk region. Today, the models are ordered by residents of other regions as well.

It is interesting: Stove Ermak for a bath (video)

Bath with a stove Kutkin

The developers have incorporated into the design of the sauna stove the possibility of using it in several modes:

• Defrosting and heating the sauna room. In this case, the stove is heated with wood at maximum mode, external screens are not installed;
• Heating the steam room in the Russian bath mode. To achieve the desired degree, the body of the Kutkin furnace is completely screened, the top cover of the heater is dismantled, leaving it open. Water for irrigation and spraying is boiled separately;
• Infrared sauna or hammam. In this case, the firebox is ignited and heated with a closed stove and installed screens. To increase the air humidity, a drip or fragrance is installed on the economizer.

Judging by the reviews about the Kutkin stove, the gas version of the stove is recognized as the most convenient and practical.There are not so many successful and inexpensive models on the market, so the demand for heating systems for baths with Kutkin ovens is only growing.

Modes of operation

Kutkin furnaces are capable of operating in several modes:

• dry-air (work with an open heater lid);
• wet steam mode (if a sauna is preferable);
• Turkish steam room mode (work at low temperatures).

The creators of the furnace claim that it was originally created as a dry-air furnace, and was later improved to work in several modes. Jadeite stone is predominantly used for the economizer.

Today, fireplace stoves are becoming more popular. It's nice to sit in a warm dressing room, enjoying the pacifying picture of firewood burning in the stove. The Kutkin stove is equipped at the customer's request with a large glass firebox door. It is made of specialized heat-resistant glass, which does not smoke during operation. The standard oven model is also equipped with smaller glass.

Due to the fact that fuel tends to rise in price, this stove provides the ability to operate in two modes:

• on gas;
• on the wood.

If in your region gas is cheaper and more affordable than wood, the Kutkin stove is equipped with a gas burner. The burner replacement process is simple, described in the documentation. We remind you that if a gas oven is used, coordination in the field of fire safety with various authorities is required. The choice of fuel does not affect the quality of the furnace modes.

Testimonials

Alexey Smirnov, Chelyabinsk

Now I understand how to properly handle the stove so that the steam is normal and the temperature is kept constant. It took five days of experiments with different modes to understand Kutkin's work. Heats the air in the bath very quickly, but the stove is very peculiar, if you adapt, there will be no price.

Vladislav Adzhanyan, Kursk

The stove came from the old owner along with the bathhouse, he advised not to change it. Before melting Kutkin, he decided to clean the pipe and chimney, the owner said that he did not look at all. I was surprised - everything is clean, there is not even dust. The stove burns well, sometimes even too quickly, it could be made slower.

Sergey Antonovsky, Moscow

The stove is not bad, but if it is not warmed up to the maximum from the very beginning, problems begin with the emission of smoke and burning, and in the rain, the smell of burnt hay appears. It is easy to drown, Kutkin never let down in this matter.

Tags: closed, kamenka, kutkin

«Previous post