Wiring diagrams for connecting the thermostat to a water-heated floor

How is the regulation of underfloor heating

If the house or apartment is not large, the region of residence is southern, warm floors can be left as the main source of heating. In other cases, it is made as a nice addition to make life more comfortable. For example, in the children's room, in the bathroom or in the kitchen, in the work area. The thing is that it is impossible to make the floor very hot for obvious reason. If it is minus 40 degrees outside the window, the heating system should be more powerful.

It is very convenient to have floors whose heating level is controlled. There are many devices for adjusting the temperature of the warm floor. Their work is based on a single principle.

Heating circuits are controlled individually, through the arrangement of special collectors that bring together the inputs and outputs of the heating system:

The temperature sensor for a water heated floor signals the thermostat that the temperature in the room (or on the floor surface) has increased. The chain includes a servo drive that controls the valves. Having received the appropriate signal from the thermostat, it admits a new batch of hot water into the system. Or, on the contrary, it will block its movement if the thermostat gives a signal that the room has become hot. The thermal valve for a water-heated floor helps to regulate the flow of the heating medium. Such a thermostatic valve for underfloor heating allows you to effectively regulate the flow temperature of the heating medium. To pump water, a pump must be installed.

So, to control the temperature indicators of warm floors, you need:

• collector, where all circuits are reduced;
• thermostat;
• thermal sensor;
• a servo drive that controls valves;
• pump for pumping water.

All this together makes it possible to make the heating system automated. This is not a simple convenience, but energy savings. The thermostats can be set so that in the absence of people, the heating of the room will be reduced. The machines allow you to save 30 to 40 percent of the volume of energy carriers. Moreover, this will not affect the living conditions of people, on the contrary, it will make it more comfortable to stay in an apartment or house.

In order to increase the safety of the devices operation, the installation of safety valves and protective fittings against voltage surges in the electrical network and overheating of electrical equipment is provided.

Electronic devices with software control

Programmable thermostats are structures that store the data of the set temperature regime. Such devices are installed in systems with built-in electric heating elements.

They provide an automatic process for setting and adjusting the temperature in equipment designed for cooling or heating systems.

The need for thermostats is to provide devices equipped with elements for changing temperature indicators, turning them on / off when certain temperature parameters are reached.

With the help of thermostatic structures, the controlled environment will have a predetermined temperature.

The principle of operation of programmable devices is the same, regardless of which device they are built into:

• a thermal sensor, built-in or remote view, must transmit accurate information to the thermostat, which regulates the temperature by increasing or decreasing the power of the heating device;
• the efficiency and quality of work of "warm floors" with any heating element depends on the temperature sensor;
• temperature sensors are placed in the room so that they are removed from the points that affect the temperature change, since the distortion of the sensor readings will introduce an error in the operation of the thermostat;
• high-quality operation of the sensors allows the temperature controller to maintain comfortable environmental conditions in the room;
• thanks to the accuracy of the transmission of readings to the regulating device, the floor covering will not overheat and deteriorate;
• advanced functions of the programmable thermostat microcircuit provide the temperature setting for a separate room individually, depending on the time of day or other requirements;
• the operation of the energy system at home is stabilized, which is necessary for calculating the economical consumption of electricity in Moscow.

We recommend: How to choose a thermostatic valve for underfloor heating?

There are the following types of temperature sensors used in the "warm floor" system. any of them can be built into the thermostat housing or be equipped at some distance:

1. the sensor for determining the ambient temperature must be provided by the air circulation in this room;
2. infrared elements designed for remote measurement of the temperature of the heated floor covering can be built into a programmable thermostat or separated into a separate unit. For such a combination, it is necessary to comply with the only requirement: the absence of obstacles between the sensor and the controlled surface. the distance between them must be equal to or greater than 30 cm;
3. contact elements for measuring the temperature of the floor surface represent a structure consisting of a wire connected at one end to a thermostat. The other end with a thickening is placed in a corrugated tube located under the floor surface;
4. combined sensors for measuring the temperature of the floor surface.

Several sensors can be connected to the contact thermostat, which allows servicing several zones in one house or apartment in several rooms for different purposes.

What thermostats can control

Modern thermostats for a water heated floor can control the following indicators:

• indoor air temperature;
• floor heating level;
• combine air and floor temperature control.

To control the air temperature in the room, sensors are built into the thermostat housing. They set it up specifically to take into account the level of indicators in a controlled room. This control is only effective inside buildings that are well insulated and heat losses are minimized. If this condition is not met, it is not cost-effective to install a room temperature control sensor.

If it is necessary to control the heating of the surface of the floor covering, the temperature sensor of the water underfloor heating is installed as close as possible to the heating circuit. Such a system is effective when the warm floor serves as an additional heating of the room. The temperature regime of the air is established by the main sources of heat.

A thermostat for a water-heated floor with a combined control system is rarely used, in separate modern heating circuits. It can simultaneously control the level of heating of the floor and the air, or, at choice, one thing.

Thermostat setting rules

The initial setting of thermostats of any kind consists in checking the overall performance of the entire underfloor heating system.

To do this, it is necessary to turn on the heating, set the necessary parameters on all measuring devices and completely warm up all the rooms of the house or apartment. Set the optimal heating mode for the boiler to 60 ° C.

In case of frequent switching on of the boiler and going to start, set a lower power and check the system again.You will have to choose the right temperature in each separate room during the operation of the underfloor heating system.

Similar posts
• How to install a warm floor in the kitchen?
• How does the floor heating automation work?
• How to make the underfloor heating strap correctly?
• Characteristics of underfloor heating Nexans
• What are the characteristics of the Rehau pipe for underfloor heating?
• How to install underfloor heating Uponor?

Types of thermostats by design and installation method

When the question arises of how to regulate the temperature of a water-heated floor, in the variety of different types of thermostats, you need to orient yourself correctly. Despite the fact that they perform the same function, the additional features are different, and, accordingly, the price.

Devices that are produced by manufacturers can be divided into five groups according to the complexity of the design:

1. mechanical;
2. remote sensory;
3. ordinary electronic;
4. programmable thermostats;
5. radio controlled.

The reliability of the models does not depend on the design, but on the conscientiousness of the manufacturer and the operating conditions.

According to the method of installation, thermostats are:

• conventional wall-mounted, which are mounted in every room and are suitable for small apartments;
• panel, allowing from one point to control the process in a large building.

Each of these methods makes it possible to conveniently operate the temperature control system.

Mechanical type

Mechanical thermostats for a water-heated floor are the simplest models, reminiscent of devices for regulating the cold in refrigerators. They are inexpensive and easy to maintain. The temperature regime is selected by turning the thermometer head. A special mark is aligned with the desired number on the gradation scale. If something is set incorrectly, everything can be easily corrected. There are models where a toggle switch is installed to completely turn off / turn on the system. There are mechanical thermostats with a timer. It allows you to set a certain period of time during which the heated floors will be turned on.

The only drawback is the need for constant temperature control, changing the indicators is possible only manually. They do not have any electronics that can distribute the temperature level over time.

You should be aware that there are low-quality specimens that do not accurately reflect the temperature. This, in principle, is not so scary. It is recommended to check the readings with the room thermometer immediately after starting the device. Then carry out control taking into account the difference.

Types of thermostats

Watch video - overview of sensors for water floor

Various principles and design solutions are used to create these devices. Let's take a look at them.

1. 
   A mechanical thermostat for a water heated floor is the most simple, reliable and durable device. Air heating is regulated by a rotary knob, the temperature scale is applied to a durable plastic case.

Some manufacturers install an open - closed valve on the thermostat. The disadvantage of this device is the need for constant monitoring - it works only in manual adjustment mode.

Some manufacturers allow serious inaccuracies in the calibration of the temperature scale, therefore it is necessary to carry out an additional check of the device using an accurate calibrated thermometer.

1. With a touch-sensitive remote controller for the temperature of a warm floor, control and adjustments are carried out (find out in more detail) from the corresponding panel or remote control. These models provide more accurate and reliable heating control, but in some cases these figures depend on the manufacturer.It is not worth considering the price of the device as the main parameter of choice, in some cases this approach is not justified.

1. In terms of functionality, electronic thermostats are not much different from touch-sensitive devices, but they stand out with a more convenient display.

2. 
   Programmable thermostats are convenient for the ability to independently compose heating control programs.

On such a device, settings are possible for a day, for a week, as well as the ability to work in automatic mode with support for an economy mode during the absence of people in the house. This allows you to save up to a third of your energy costs.

Such devices make it possible to automatically maintain the temperature in individual circuits of a complex branched heating system with a water underfloor heating. The disadvantages of the device include the high cost and complexity of adjustments. Before commissioning, you need to carefully study the instructions for connection, installation and settings, mistakes entail the failure of a complex expensive system.

1. Radio-controlled sensors can be considered exclusive due to their high cost. When using them, there are no low-voltage control circuits, since the adjustments are made by radio signal. Each device is equipped with a radio transmitter and a radio receiver for signals that control the operation of the servos. Such devices are perhaps appropriate in elite cottages for adjusting the temperature of a warm water floor, if the owners do not want to have control wiring harnesses.

Sensor thermo valves with control panel

Temperature control of water heated floors can be carried out using sensor models that are controlled remotely using a remote control.

The devices have a modern, easy-to-use touch panel. It displays all the current information about the temperature regime, including a warning about the presence of some kind of failure in the system.

The attractiveness of such structures is not only in their "remote" maintenance, but also in the fact that they can regulate several circuits at once. It is for such complex systems that sensor models controlled by a remote control are most often used. A thermostat from a reliable manufacturer will last a long time.

Equipment characteristics

The coolant from the boiler passes through the pipe line to the collector. From it, the liquid enters the floor pipeline. Giving off heat, it returns back to the collector, which has a separate return outlet for the cooled heat carrier. The circulation pump pumps water back into the boiler.

With manual control of the temperature regime, valves are installed on the circuit with cold water and a heat carrier of high temperature. If the room has warmed up well enough, then the hot water valve is closed. If the room is cold, then the valve is opened.

For automatic regulation of the heating mode, a three-way mixer with a thermostat and an external temperature sensor is installed. This system forms a thermostatic valve. It is installed at the inlet to the manifold. The equipment is made of brass or bronze.

• The three-way valve has 3 outlets for hot and cold water and for the heating medium, which is supplied to the floor line. On the body, markers indicate the direction of flows of different temperatures.
• A mixing chamber is provided for mixing liquids of different temperatures.
• A thermostat with a temperature controller is located on the body.
• The temperature sensor is located on the thermostat.
• The valves close off the cold and hot flow outlets. They can be disc-shaped or needle-shaped. Their work depends on the thermostat.
• The thermostat is a system that consists of a liquid capsule and a spring-loaded stem. Valves are attached to it.
• The temperature sensor has a digital panel on which the heating modes are indicated.

We recommend: What are the characteristics of the Rehau underfloor heating pipe?

The thermostat can be located in the thermal head or in the actuator. The devices have a different circuit, but the same principle of operation. The thermal head is a thermostat, which works with the help of a liquid: it is sensitive to temperature changes.

The servos are powered by the electrical network. The liquid is contained in a container. It contains a heating plate. The servo is installed on the manifold.

The three-way mixer is designed for heating systems of large areas. In separate rooms or in country houses, a two-way valve is connected to the collector. It is installed on a circuit with a high temperature coolant. Water flows through it in only one direction.

Conventional electronic thermostats for water floor heating

Some consumers prefer to install conventional electronic thermostats in their home. They practically do not differ from touchscreens with remote control. An electronic board and buttons are located on the plastic panel. With their help, the required temperature regime is set, which can change several times per day.

It is not difficult to figure out the settings of such a device yourself. The design is an order of magnitude higher than that of a mechanical type thermostat for a warm water floor.

What are thermostats?

Thermostats for underfloor heating differ in their functionality, color and configuration. Choosing devices, you need to focus on the intended interior in the house. Thermostats are built-in and overhead:

• Overheads cut into the walls without additional installation work;
• Built-in ones are installed in boxes in the wall, the surfaces do not protrude outward.

In terms of functionality, thermostats are programmable and classic. Programmable multifunctional, so you can set the modes for each day. Classic equipment options are easy to install and inexpensive.

Floor heating is monitored using floor or air temperature sensors:

1. The thermostat with one sensor (for floor) is a popular and economical option for classic and programmable equipment. Can be used for any floor covering;
2. A device with two sensors (air and floor) is included with every programmable thermostat. They are made to control the room climate and change the temperature of the floors. It is supposed to be used in heat-sensitive coatings - laminate, parquet, etc.

Non-programmable thermostats with floor heating sensor

• Thermoreg TI 200 (Sweden, manufactured by THERMO) - 4 color panels, temperature range + 5… + 40 degrees Celsius. Classic version for heated floors;
• Keeply 10.10Е (South Korea, manufactured by KEEPLY) is a standard thermostat for regulating the floor heating system. Operating temperature range 0 ... + 40 ° С. Equipped with LED indicator;
• IQ Thermostat M (manufactured by IQWATT) - built-in analog thermostat, range + 5… + 40 ° С.

Programmable thermostats with floor sensor

Korean thermostats CALEO:

• Caleo 920 (100 ... 240V) - electronic display, weekly programs, several operating modes per day, memory function for preset settings;
• Caleo 330PS (85 ... 265V) - built-in and surface-mounted thermostat with a range from +2 to +40 degrees. Possibility of programming for 5 days.

Caleo 920

"Smart" programmable thermostats

Devices that themselves can change the temperature level in the room in the absence of people are much more complicated, but the savings from their use are enormous. The costs of their purchase and installation will pay off in the very first winter season. We are talking about programmable thermostats.They can serve several circuits at the same time. It is possible to connect to the "smart home" system.

The programmable thermostat solves many problems with heating, provides a comfortable stay in the room. Allows you to set specific days, hours and weeks to a given temperature. Therefore, even in the absence of the owners, he himself will transfer the heating system to economy mode. All information about its work is shown on the display.

Only a specially trained technician can install them. This equipment is expensive, requires careful attitude to itself, but it fully justifies itself.

The principle of operation of the thermostat

Thermostats are special devices for adjusting the thermal regime in a room depending on weather conditions. They are reliable, easy to operate, as a rule, they serve for many years without breakdowns and failures of adjustment modes.

The devices are designed for use by people of any level of knowledge. That is, their management is available, including for adolescents and the elderly.

Thermostats are designed to set the minimum temperature for each room in the house individually. This is especially advantageous for models with programming the operating mode of the device in the interval of the whole day.

The working tool is a remote thermostat of the "warm floor" system (STP). Its purpose: upon reaching the temperature set on the device, open or, conversely, close the electrical circuit.

As a result of this action, the system stops or resumes heating. Thermostats are divided into the following types:

Mechanical structures

The temperature sensor is a bimetallic plate that closes the contacts of the heating mats. When the temperature in the room rises, the plate bends and opens the electrical circuit, as a result of which the supply of electrical energy is cut off.

After cooling and straightening, the plate closes the contacts again, resuming the cycle.

The temperature in the room is changed by rotating a special wheel. Despite the primitive design, minimal functionality, the impossibility of installing a remote control, the mechanical thermostat continues to be used, due to its features:

• simplicity of settings during operation;
• low cost;
• reliability of the structure during operation of high and low temperatures;
• independence from energy interference;
• the device will automatically turn on with the supply of electricity after it is turned off.

We recommend: What is the difference between Unimat underfloor heating models?

Electronic thermostats

Thermistors are used as temperature sensors in relay (electronic) temperature controllers. Thermistors, when the environment heats up, change the resistance to the electric current, which is fixed by the control microcircuit, which transmits the relay signal.

The relay coil opens the contacts, breaking the circuit, the power circuit is de-energized.

The ambient temperature decreases by 1 degree, no more, the circuit is closed, resuming the heating of the "warm floor" system.

There are models of electronic thermostats, to which other isolated areas of the underfloor heating, equipped with their own sensors, can be connected.

Electronic or relay thermal designs are more advanced in comparison with mechanical counterparts and have the following advantages:

• the sensor, a remote element of the thermostat, can be installed in any convenient place in the room;
• the set temperature and the recorded current data are shown on the display;
• the ability to control the temperature in several zones of the "warm floor";
• the temperature sensor registers the temperature and displays it on the display with an accuracy of several fractions of a degree;
• there is a possibility of completing with an external control unit.

The electronic circuits of thermostats largely depend on the state of the voltage in the electrical network.

With voltage drops and short-term power outages, failures are observed in the stable operation and settings of the electronic device microcircuit. When calculating the cost, electrical structures are priced much higher than their mechanical counterparts.

Wireless radio controlled thermostats

Even more expensive than electronic programmable thermostats, radio thermostats are rarely installed. Used in homes where it is decided not to use electrical cables.

Servo commands are sent using radio signals. It happens in the following way. The signal from the sensors for the water underfloor heating goes to the radio thermostat. He redirects them to the radio controller. The radio signal chain leads to the hot water dispenser. The price of such equipment is high due to the fact that receivers and transmitters are installed at each stage of radio signal transmission.

Repairing such a system, if it fails, is expensive.

How to connect a warm floor to a thermostat?

Installing a thermostat with a clear understanding of each stage is not a difficult process, however, you need to be aware of some nuances. The installation of the device should be carried out at a height of about 80-90 cm from the floor, but if the thermostat is to diagnose the air and floor temperature, then it is better to place it in another place.

The installation process consists of several stages:

Preparation for work

Before proceeding with the connection, you must familiarize yourself with the specifics of the device. All the necessary requirements are contained in the instructions. Particular attention should be paid to the section that describes the installation of the thermostat, since the installation process of the device for different systems may have some differences. Before starting the installation, be sure to turn off the electricity supply in the switchboard.

Prepare the following accessories for the job:

• indicator screwdriver;
• tester;
• screws for fastening;
• level.

Connecting wires

To connect the temperature controller to the floor, you must first run the power wires. Use an indicator screwdriver to identify the phase wire, which can be black or brown. The wire with a working zero is colored blue, the ground wire is yellow-green.

Using a tester, measure the voltage between phase and zero. The device should show a voltage of 220 V. There is a connection diagram on the back of the device or in the instructions. For different thermostats, the circuit is different, so be sure to check this point before connecting the wires.

Next, connect the temperature sensor, which is located in the corrugated tube, to the sensor terminals. If the sensor is not inserted into it, then you will need to do it yourself.

Installing the front panel of the thermostat

Using the screws provided, secure the bezel. Using a level, make sure the thermostat is level. Then close the lid of the appliance and restore the power supply. If everything is done correctly, then his screen should light up. The installation of the underfloor heating thermostat can be considered complete, after which you can start setting it up.

Checking the correctness of work

After installing the thermostat, it is necessary to check the correctness of its operation. To do this, you need to perform the following actions: first you need to set the on and off times, the temperature parameters of the device. After that, you need to start a trial daily cycle of its work.

Remarks

Since the thermostat is a complex electronic device, its installation can only be performed if you have experience in conducting electrical work. Errors during the installation of the temperature controller can lead to damage to the underfloor heating.

If you decide to install the thermostat yourself, then consult an electrician who has practical experience before starting work.

Wiring diagram of the thermostat to the warm floor

How to decide on the choice of thermostat for regulation

The first thing that pays attention to when it comes to a comfortable stay in an apartment or house is the air temperature in the room. Whatever the interior, the heating method and all the associated consequences are more important. If the room is evenly heated, there are no damp floors, corners and nooks with cold drafts, it is pleasant to be in the room. Thermostat for underfloor heating with a remote sensor allows you to achieve a comfortable temperature level in each room separately. However, it is not advisable to buy a mechanical thermostat for such purposes. He does not have the ability to control the temperature regime in several rooms at the same time.

Before buying a thermostat, you need to think about what kind of temperature control problems this device will solve. If there is a need to regulate the heat in the absence of the owners, a programmable thermostat will perfectly cope with this task.

When family members cannot decide on the general temperature regime in the house, a multi-channel electronic thermostat will help, which, using sensors installed in different rooms, will regulate the heat level.

The most inexpensive and easy-to-use mechanical thermostat will help maintain the desired temperature level in a small apartment.

When choosing a thermostat, it is imperative to know its power. It must match the capacity of the underfloor heating system.

Different types of room thermostats for water underfloor heating are designed for heating systems with certain technical characteristics and heat-saving characteristics of buildings, the climate of a given region. The wishes of the consumer are taken into account. So, for example, different models and manufacturers have different interfaces, with the help of which it is convenient to monitor the operation of the device.

Functions and advantages

Among all the possible functions of the thermostat operation, the most basic one can be distinguished - to maintain the temperature in the room at the required level. This is obtained by turning on or off the elements of underfloor heating. Thus, it further reduces energy consumption, since the power is switched on at regular intervals. If you use a thermostat for underfloor heating, heating costs are saved. Many will say that this device is worth a lot of money. This is true, especially when it comes to quality products. But it pays off within the first months of use. Everything will depend on the specific cost of the thermostat.

One more very important factor can also be attributed here, indicating a thermostat for a warm floor on the positive side. No overheating of the heaters will occur if the system is working correctly and without interruption. This solution increases their useful life, and also prevents them from breaking at elevated temperatures.

The underfloor heating system can perfectly do without this device. In this case, everything should be done independently. Constantly monitor the temperature level, turn on the power and turn it off when a certain temperature is reached. This leads to a decrease to a minimum of a comfortable level, distraction from household chores and constant work, and slightly increased power consumption.

If you independently control the operation of the heated floor, very often burnout of the elements occurs due to the inopportune power off. It is not always possible to do this by the hour. Everyone can forget and there is no way to get rid of it.Therefore, it will be much more pleasant and easier to purchase a thermostat, install it according to the rules, and enjoy its work.

Tips for installing thermostats

Before performing the installation, you need to get acquainted with the instructions and the connection diagram so that the installation of the underfloor heating sensor is performed correctly. It is shown on the back of the case. If the connection order is violated, the device will be damaged. Therefore, at this stage, the correct connection is very important, which determines how effectively the entire self-regulatory system will work. Of course, it is also important how competently the installation of the contours of the warm floor was made.

Note that the servo has a double-rotating motor. It rotates clockwise or in the opposite direction depending on the signal that the thermostat gives it. In this case, the valve increases or makes less clearance in the pipe through which the coolant flows.

The thermostats should be located close to electrical outlets, at a height of 0.5 to 1 meter from the floor. If the family has a small child, then the device must be fixed higher. This is especially true of programmable electronic models that can be easily disabled by inept handling.

The equipment operates from a 220 V network (except for radio-controlled ones).

All devices must be connected to the mains in accordance with the rules for electrical installations.

How does automation work?

The thermostatic three-way valve for underfloor heating is connected in front of the manifold. A certain temperature mode of heating is set on the sensor. The device starts working when the parameters are changed.

1. The device consists of a semiconductor that has the temperature of the coolant entering the line. Energy is transferred to the thermostat fluid.
2. With an increase in heating, the liquid expands and presses on the stem, which is lowered.
3. This closes the outlet from the hot pipe and opens the outlet from the return circuit.
4. The cooled heat carrier enters the chamber of the three-way mixer, where it is connected with hot water from the boiler. The mixing process can take place in a T-shaped pattern: hot and cold coolant flow enters the thermostatic mixing valve symmetrically from both sides. The liquid exits into the main line at an angle of 900. In the L-shaped scheme, hot water enters the mixing chamber from the side.
5. The coolant temperature drops. It enters the floor line in a cooled form. Heating mode tends to reach the set rate.
6. As the temperature drops, the liquid in the thermostat narrows. The spring-loaded stem is straightened, the outlet of cold water, which goes through the return pipe, is closed. The hot coolant again enters the line.

When using servo drives, a device that works from the mains is connected to the mixing valve for the underfloor heating. The sensor heats up, closes the electrical circuit. The plate heats up, which in turn transfers heat to the thermal fluid. It expands, presses on the stem, which makes the poppet valves work.

We recommend: How to lay underfloor heating on the ground?

When using a servo drive, the heating system changes the operating mode within 3 minutes. If a thermal head is used as an automatic device, then it will take up to 15 minutes to heat the liquid in the thermostat.

The principle of operation of a two-way valve for underfloor heating is somewhat different. When the temperature in the line rises, the thermostat makes the poppet valves or a ball device work, which completely blocks the outlet for hot water. The cooled heat carrier from the return pipe is returned to the floor circuit.

When the temperature drops, the valve opens hot water and shuts off the return line. There is no mixing of the liquid.The principle of operation of a two-way thermostatic valve for underfloor heating is identical to manual valve switching, but the system works in automatic mode.

A three-way thermostatic valve for underfloor heating is installed in the heating system for a large heating area. The equipment is necessary for a boiler that heats water to a high temperature. The two-way valve is connected to the system as an additional heating control for individual rooms.

Equipment for automatic control of heating mode can be installed in a single-circuit or double-circuit heating system. This is convenient when using various types of heating, with radiator and floor heating. The mixer is connected upstream of the circulation pump. I recommend installing a water filter beforehand. When connecting, use the threaded mounting method.