A hood for a ventilation pipe 75 mm
Stock! Free delivery in Moscow + Book "Toilets and composters" as a gift!
Peat toilet PitEco 905 large volume 120 liters and easy service on wheels
Winter promotion! Simply irreplaceable at the dacha thermal seat with a discount for 420 99 rubles!
Significant tank volume enough for a long timeand taking out the model 905 dry closet has never been easier. Having slightly raised the handle in front, the toilet rolls out on wheels from the drainage base.
Explore what new technologies are applied in the modern Piteco 905 dry closet
- strong wheels on a metal rod will allow you to easily transport the toilet to the place of disposal;
- thanks to ventilation pipe adapter, you can roll out Piteco 905 without disassembling the air vent;
- drainage base removes the need to disconnect the hose. when servicing;
- automatic valve from leakage guarantees the absence of leakage;
- drain filter from clogging the drain hose;
- the bottom of the tank is inclined for efficient liquid removal.
Learn about the benefits of Piteco 905
- more than half the price of Finnish counterparts;
- a large volume of 120 liters will last for a long time and take out less often;
- made of premium plastic that looks good even compared to Finnish toilets;
- easy to carry, without disconnecting ventilation and drainage;
- good peat spreading system + large capacity for peat mixture 23 liters;
- convenient stencil for attaching the base;
- all installation steps traced in the instructions step by step.
Watch the video "Secrets of the peat toilet Piteco 905 for a summer residence":
At the peat toilet Piteco 905 good reviews from summer residents... Most often, a cap with a fly screen, an additional ventilation pipe and a peat mixture are ordered to the standard set.
Chimneys (ducts) or chimneys for stoves
The height of chimneys located at a distance equal to or greater than the height of a solid structure protruding above the roof should be taken:
- not less than 500 mm - above a flat roof
- not less than 500 mm - above the roof ridge or parapet when the pipe is located at a distance of up to 1.5 m from the ridge or parapet
- not below the ridge of the roof or parapet - when the chimney is located at a distance of 1.5 to 3 m from the ridge or parapet
- not lower than a line drawn from the ridge downward at an angle of 10 to the horizon - when the chimney is located from the ridge at a distance of more than 3 m
It is allowed to connect two stoves located in the same apartment on the same floor to one pipe. Such placement can be allowed in exceptional cases, provided that the wall is insulated from the outside by thickening the masonry or protecting it with heat-insulating non-combustible materials (the method of insulation must be provided for by the project).
Then the distance between the outer surface of the walls and the nearest inner surface of the channel is taken to be at least 640 mm (2.5 bricks). When connecting pipes, it is necessary to provide for cuts with a thickness of 0.12 m and a height of at least 1 m from the bottom of the pipe connection.
When the chimney is located in the middle of the room, the walls are laid out with a thickness of 1/2 brick, and when located at the cold outer wall of the building - in a whole brick. The thickness of the walls of chimneys or chimneys at the point of their abutment to metal or reinforced concrete beams should be taken as 130 mm.
The thickness of the walls of the ducts in the internal stone walls, as well as the thickness of the partitions (scatterers) between the smoke and ventilation ducts, must be at least 120 mm.Furnaces, as a rule, should be placed against internal walls and partitions made of non-combustible materials, providing for their use for placing smoke channels.
Flue ducts may be placed in outer walls made of non-combustible materials, insulated, if necessary, from the outside to exclude moisture condensation from the exhaust gases.
In the absence of walls in which smoke channels can be placed, stacked or main chimneys should be used to remove smoke. Chimneys should be made vertical without ledges made of clay bricks with walls at least 120 mm thick or heat-resistant concrete at least 60 mm thick, providing in their bases pockets 250 mm deep with holes for cleaning, closed by doors.
The inner surfaces of the chimneys should be smoother, without mortar leaks in the joints and carelessly laid bricks. The chimney must be free of slopes and turns. It is allowed to accept deviations of round chimneys at an angle of up to 30 ° to the vertical, with an offset of not more than 1 m. Inclined sections should be smooth, of constant cross-section, with an area not less than the cross-sectional area of vertical sections.
Experience shows that the cross-section of the chimney is from 1/10 to 1/12, and in more favorable cases, up to 1/15 of the size of the combustion opening in the light. In all cases, the cross-section of the chimney (if two stoves are connected to one pipe) must be at least 14x27 cm.
Brick chimneys
The cross-sectional area of rectangular chimneys (smoke channels), depending on the thermal power of the furnace, according to SNiP 2.01.01-82, should be taken, not less than:
- 140x140 mm - with a heating power of the furnace up to 3.5 kW
- 140x200 mm - with a heating power of the furnace from 3.5 kW to 5.2 kW
- 140x270 mm - with a heating power of the furnace from 5.2 kW to 7 kW
The cross-sectional areas of channels in brick chimneys must be multiples of the width of the brick. The mouths of brick chimneys to a height of 0.2 m should be protected from atmospheric precipitation. The device of umbrellas, deflectors and other nozzles on brick chimneys is not allowed.
Round asbestos-cement, ceramic or metal chimneys
The cross-sectional area of the round smoke ducts must be at least the area of the indicated rectangular ducts. Metal chimneys must be removed from the combustible roof structures by 700 mm. At the same time, within the attic, the pipes are insulated with a layer of asbestos with a thickness of at least 3 mm and plastered over the mesh with cement mortar, and in the places of passage through the combustible roof, they are additionally equipped with special devices in the form of sandboxes.
Outlets of round chimney pipes and ventilation ducts located next to them in the walls are performed with a slope of at least 60 ° to the horizon and laying (offset) of no more than 1 m. : a) the distance from the top of the branch pipe to the ceiling made of combustible materials must be at least 0.5 m in the absence of protection of the ceiling from fire and at least 0.4 m - in the presence of protection; b) the distance from the bottom of the branch pipe to the floor made of combustible or hardly combustible materials must be at least 0.14 m.
The pipes should be made of non-combustible materials, providing a fire resistance limit of 0.75 hours. and more. The smoke of the furnace often occurs from the blowing of the pipe mouth by a strong wind. To prevent this phenomenon, it is necessary to check the condition of the wind protection device (deflector) above the head of the chimney, and in the absence of a device, install it.
For deflector options, see fig.
Chimneys on buildings with roofs made of combustible materials should be provided with spark arresters. For fire safety reasons, a spark arrester in the form of a cap with a blank cover and a wire mesh on the sides with a cell size of no more than 3 mm is installed on the head.
You should be aware that weather vane and deflectors can be installed on round pipes for solid fuel stoves. When burning gas, they MUST NOT be installed, as water vapor condenses on them. This can cause ice formation.
For gasified furnaces, umbrellas of a simplified design are installed on the heads of round pipes.If the walls of the pipe are subsequently plastered or insulated with asbestos-cement slabs, then it is permissible to lay a head 1/2 brick thick.
In all cases, it is recommended to bring the chimney head above the zone of the wind back pressure.
Compost (dry) toilet Biolan Komplet 140 l on wheels
Promotion: as a gift: 3 Finnish blends + extended warranty 24 months + Book "Compost Toilets"!
Forget frequent carry-overs with Biolan Komplet - the largest of the portable compost toilets with a volume of 140 liters.
Learn about the benefits of Biolan Complete:
The increased volume of the tank will allow you forget about taking out for a long timeand thanks to wheels and two handles built into the body, the toilet is easy to serve in the country... Almost no other peat dry closet has wheels!
The peat dry closet Biolan Komplet is neat and pleasant in daily use. You can easily install a toilet on the floor in a residential building or in a garden building.
Biolan dry closet does not require any water or electricity, but works on an odor absorber (peat mixture). Ventilation tube guarantees the absence of unpleasant odors in the room.
Comfortable the thermal seat is pleasant to use even during the cooler season! Biolan is easy to keep clean thanks to its smooth plastic surface.
Natural and forced ventilation
Effective air exchange has two components:
- removal of exhaust air, which contains carbon dioxide, odors, water vapor, harmful vapors;
- ensuring the flow of fresh air.
Natural and forced ventilation
Both processes can operate on natural and forced draft.
Natural ventilation
For natural air exchange, it is enough to build an exhaust ventilation duct through which polluted air will be removed from the room to the street. The inlet openings of such a system are mounted under the ceiling, no further than 10 cm. The high position of the ventilation window guarantees effective removal of heated air due to temperature differences.
The inflow of fresh air with natural ventilation is provided by vents, windows, doors. Moreover, an open window or window works in two directions. Warm air is removed from the room through the upper part of the open opening, and street flow enters through the lower half. Gas exchange is the more intense, the greater the temperature difference between the street and the house.
For a small living room, natural ventilation several times a day is sufficient to ensure a healthy microclimate. However, if a gas stove, oven or high air humidity is operating in the room, then such air exchange is not able to cope with the task at hand.
Note! In rooms with a large area, high oxygen consumption or high humidity, additional ventilation is required.
Forced
Forced ventilation is carried out through air ducts with special fans. The fans can be built into the duct body or installed on the roof.
We recommend that you familiarize yourself with: Balcony ventilation
There are the following types of forced ventilation:
- exhaust air - polluted air is removed artificially, and the inflow of fresh air is carried out in a natural way;
- supply air - fresh air is injected;
- supply and exhaust - simultaneous forced removal and injection of air masses is carried out.
The difference between the two types of air exchange systems is in the speed of air flows. This circumstance means that ducts or air ducts with a smaller cross-section can be used for forced ventilation.
Ventilation hoods 75 mm
Everyone has a good summer vacation in the country, if you do not take into account that amenities and a toilet are usually located in the yard.Modern small-sized dry closets Piteco with all kinds of fillers that absorb the contents and block the release of odors are considered a good alternative to the old plank construction. It is enough to install a small container with peat granules in a room closed from rain and wind, arrange ventilation and be sure to install the hood on the Vent Cowl ventilation pipe.
The purpose of the chimney
Since ancient times, people have been heating their homes with stoves and fireplaces. A little later, boilers began to be used, but a pipe for the exit of combustion products is necessary in any case. For uninterrupted smoke exit, their chimney must be installed chimney
, which is a reliable protection of the chimney:
- from falling into it precipitation,
- garbage,
- birds,
- to increase traction,
- protection of the chimney from destruction.
Also, chimneys perform a decorative function, decorating the roof of a building, because modern weather vane has various shapes and beautiful decoration. The chimney cap is installed not only on chimneys, but also on gas ducts, ventilation outlets. For the high-quality performance of their functions, chimneys must have the correct design.
EXAMPLES OF OUR WORKS ARE AVAILABLE BY LINK >>
Arrangement of ventilation for a dry closet in the country
The structure can be installed almost anywhere in the summer cottage, even in a utility room. If you had to use Piteco dry closets, then you probably know how important it is to make the correct gas removal system and choose a hood for a 75 mm ventilation pipe.
The toilet structure consists of only three main components:
- Containers with a tight closing lid;
- Peat absorber, which collects everything that enters the container, gases emitted through the ventilation system, hood and valve;
- Ventilation pipe with protective cap.
Piteco's relatively simple and reliable design is designed in such a way that abandoning any element or attempting to replace any part, even a coupler or ventilation pipe, with any other device leads to abnormal situations. Leaving Piteco without a ventilation system or without a hood is putting your health at unnecessary risk. At the same time, the ventilation system installed in the room, as a rule, does not solve the problems of gas emission.
The dry closet box with ventilation system and hood weighs only 20 kg, so it can be easily carried and put away for storage at the end of the summer season. Material - low pressure polyethylene is not afraid of shocks and does not require special storage conditions. The system can be equipped with a special drain valve to remove excess fluid through the fitting.
Types of ventilation ducts
There are three types of ventilation ducts:
- Channels built into the walls, which are used during the construction phase of the building in the load-bearing walls.
- Suspended or overhead air ducts are installed in buildings during renovation or reconstruction.
- Attached or external ventilation ducts that are mounted outside.
Built-in channels are laid out of bricks without voids (heat-resistant or refractory) or concrete blocks specially made for this purpose. Although the ventilation system does not have such a heat load as in the chimney, sand-lime brick cannot be used, since it collapses quickly even with small temperature drops.
Reinforced concrete ready-made segments are more convenient and practical to use. Their ventilation duct is obtained with smoother walls, which means with greater efficiency.
In terms of aerodynamic characteristics, the first can be called an air duct made of an asbestos pipe. It has perfectly smooth walls and a circular cross-section that prevents the formation of air vortices. Asbestos pipes are "inserted" into internal brick walls during the construction phase of the house, wrapping them around.
Suspended or overhead ventilation ducts or air ducts are built of galvanized steel, drywall or plastic. Vertical sections are mounted close to the walls, horizontal ones - under the ceiling. As a rule, they are used for forced ventilation systems. In industrial premises, ventilation ducts are often mounted from round galvanized pipes.
Note! Steel without a protective coating is not used for ventilation ducts, since the air currents contain acidic oxides, water vapor, which quickly destroy iron.
External ventilation ducts are built of brick, concrete, galvanized with mandatory insulation of the walls to prevent the formation of condensation inside the system. They are built from brick, reinforced concrete or steel.
We recommend that you familiarize yourself with: Cooker hood for domestic and industrial use - snail fan
Special requirements for materials for air ducts are imposed where the removed air flows contain chemically aggressive substances or have a high temperature. They use stainless steel or steel with a special polymer coating. In some cases, aluminum ventilation ducts are built.
Ceramic ventilation systems are used in chemical industries. For rooms where the air is heated above 100 degrees, ventilation is mounted from steel with a thickness of at least 1 mm.
Features of the device and use of the ventilation system
The corrugated ventilation pipe of the vent cowl brand, 75 mm in diameter, is connected to the outlet pipe on the body of the tank with the absorber. For the complete removal of flue gases, several installation conditions must be met:
- The recommended pipe length is four or more meters;
- The cut of the ventilation pipe, taking into account the hood, must be at least one meter above the roof of the room;
- The outlet must be closed with a protective cap.
It is best to insulate the corrugation and place it in a galvanized pipe, and it is imperative to use a plastic cap. Any metal or galvanized material will not last more than three months in service.
Protective plastic cover
Of course, the material of the protective cap, like the ventilation pipe itself, does not affect the quality of the toilet. Exhaust gases with water vapor act like sulfuric acid, therefore a special resistant plastic is used for the cap and pipe.
Installing the deflector
Its effectiveness has been proven by many home and cottage owners who have used this model. Despite the fact that the price of such products can go up to $ 140 for standard designs, the demand for them remains constant.
In order not to overpay, you can make the described device yourself. The whole process will take no more than 3 hours. It all depends on the skills of the collector. At the first stage, a drawing is created, after which blanks are made. Next comes the assembly of the device and its installation on the chimney, followed by fixing.
Before drawing drawings, you should calculate the diameter of the outlet pipe and the diameter of the cap
It is also important to measure the height of the deflector itself. To avoid mistakes in this moment, special formulas will help:
- height = 1.6-1.7 x diameter;
- diffuser width = 1.2-1.3 x diameter;
- hood width = 1.7-1.9 x diameter.
After drawing the contour of the blanks on the paper, you can proceed to creating blanks from metal. It is better to take stainless or galvanized steel, the thickness of which varies from 0.5 to 1 mm.
After preparing the pattern for metal, you can proceed to the stage of assembling the product. This will require a drill, riveter or welding. If the latter option is preferred, you must be very careful not to burn through the deflector section.
The cap is fixed on the base with legs, which are drawn in the same way on paper and subsequently cut from a sheet of stainless steel. When all these stages are passed, only the most crucial moment remains - installation on the chimney.
Drill holes in the pipe to secure the deflector. Rivets are fixed. After that, you need to check if the installed device has a slope in different directions. Clamp installation is required if the deflector is loose. If the pipe is not made of brick, this option will come in handy. If we are talking about a ceramic pipe, then you have to use special adapters.
Product description
When buying at the Internet price, discounts on the loyalty card do not apply! The price is final! When placing an order for a product that is out of stock, it is ordered, the delivery time of which is from 14 to 30 days or more, it is necessary to make an advance payment in the amount of 50-100% of the value of the product. The need for prepayment and the amount of prepayment is agreed with the manager by phone when placing an order.
We have a large assortment of sanitary ware for the home of the most famous brands:
We sell engineering plumbing fixtures from the world's best manufacturers:
P-ventilation outlets
- Ventilation outlet for leading to the roof of a kitchen hood pipe, exhaust ventilation with a duct fan or a recuperator.
- The pipe is thermally insulated to prevent condensation from forming in the pipe. The inner tube is made of galvanized steel. The length of the inner pipe allows it to be inserted into the supply air duct for a length of 300 mm This facilitates vertical installation in cramped attic spaces and makes the structure more robust. The lower edge of the inner pipe has a rubber seal that seals the pipe-to-duct connection. The hood of the ventilation outlet protects against the ingress of precipitation and dirt into the duct.
- For installation, XL is ordered separately - a pass-through element according to the type of roofing material.
- Raw materials: galvanized steel, expanded polystyrene, polypropylene (PP).
- Set: pipe with cap and a set of fasteners (self-tapping screws 8x25 mm in color + nozzle).
- Name
- Pipe height with cap, mm
- Air duct diameter, mm
- Outside diameter, mm
- Colors
- Net / gross weight, kg
- Price, rub / piece
- XL -250 / IZ / 700
- 700
- 250
- 300
Ventilation outlet for leading to the roof of a kitchen hood pipe, exhaust ventilation with a duct fan or a recuperator.
| Color | Item code | EAN code | LVI code | RR code | RAL code |
| green | 741756 | 6410457417568 | 7813296 | RR11 | |
| brick | 741759 | 6410457417599 | 7813299 | RR750 | RAL8004 |
| brown | 741754 | 6410457417544 | 7813294 | RR32 | |
| red | 741758 | 6410457417582 | 7813298 | RR29 | RAL3009 |
| grey | 741757 | 6410457417575 | 7813297 | RR23 | RAL7015 |
| the black | 741752 | 6410457417520 | 7813292 | RR33 | RAL9005 |
- XL -250 / IZ / 500
- 500
- 250
- 300
Ventilation outlet for exhaust ventilation with duct fan or recuperator.
| Color | Item code | EAN code | RR code | RAL code |
| green | 741766 | 6410457417667 | RR11 | |
| brick | 741769 | 6410457417698 | RR750 | RAL8004 |
| brown | 741764 | 6410457417643 | RR32 | |
| red | 741768 | 6410457417681 | RR29 | RAL3009 |
| grey | 741767 | 6410457417674 | RR23 | RAL7015 |
| the black | 741762 | 6410457417629 | RR33 | RAL9005 |
- XL -200 / IZ / 700
- 700
- 200
- 300
Ventilation outlet for exhaust ventilation with duct fan or recuperator.
| Color | Item code | EAN code | RR code | RAL code |
| green | 741716 | 6410457417162 | RR11 | |
| brick | 741719 | 6410457417193 | RR750 | RAL8004 |
| brown | 741714 | 6410457417148 | RR32 | |
| red | 741718 | 6410457417186 | RR29 | RAL3009 |
| grey | 741717 | 6410457417179 | RR23 | RAL7015 |
| the black | 741712 | 6410457417124 | RR33 | RAL9005 |
- XL -200 / IZ / 500
- 500
- 200
- 300
Moscow within the Moscow Ring Road
Provided by its own online store service.
The cost of delivery by courier depends on the amount of the order and is:
- is free inside the Moscow Ring Road, with the order amount more 5000 ₽
- 300 ₽, with the order amount less 5000 ₽
Delivery terms
When placing an order before 4 pm, in most cases, the order is available for shipment on the next business day. A more exact time is agreed with the operator after placing an order.
Delivery time intervals
10:00 - 15:00 12:00 - 18:00 19:00 - 23:00 day off Sunday
Pickup in Moscow
pick-up point at the address: Moscow, Okruzhnoy proezd, 27A is carried out free of charge.
Payment
Attention! Payment at points of issue is temporarily carried out only cash! We are sorry for the inconvenience.
S-ventilation outlets
These ventilation outlets are a vertical air flow deflector for ventilation of private houses, apartment or floor ventilation of apartment buildings and institutions. S-vent is supplied with the base.The base has moisture-proof, due to its shape, fixing holes with screws and a galvanized steel connecting pipe with a rubber seal. The sealant guarantees the tightness of the connection between the branch pipe and the duct. The ventilation outlet is installed on the round pipe of the ventilation duct without a base.
Installation is carried out on a ventilation shaft, on a flat surface trimmed with metal, bitumen or other material, using a square base. The shaft opening must be at least as large as the base of the S-ventilation outlet.
The ventilation fungus is the final part of the structures created to remove polluted air from residential and office premises. This device plays an important role in ensuring the correct operation of the air conditioning system. The absence of a hood or its incorrect installation is the cause of human diseases, damage to the interior decoration and interior elements. Let's dwell on the features of the device and installation of a fungus for ventilation.
