The Russian company Rifar entered the market for the production of aluminum and bimetallic radiators in 2002. Such moments as incorrect connection of the hot water supply, which can cause water hammer in the system, contamination with chemical impurities, were taken into account by the designers in the development and manufacture of heating radiators.
Rifar products are intended for consumers in Russia and the CIS countries. A test pressure of 30 atm guarantees the operation of radiators at a working pressure of up to 20 atm. Thanks to the inner protective layer, the batteries are not subject to corrosive processes, and the outer powder painting under special conditions gives the surface not only an attractive appearance, but also a great resistance to external damage.
- 2 Rifar radiator range
- 3 Comparison with other models on the market
- 4 Price table of bimetallic radiators
- 5 User Reviews
Features of Rifar radiators
Rifar bimetallic batteries have a core made of special steelable to withstand significant loads, it has low heat transfer, while aluminum fins, on the contrary, have a high heat transfer.
Radiators have many advantages, thanks to which they gained great popularity:
- One of the main advantages is versatility of radiators, they can be installed both in multi-storey buildings with centralized heating, and with an autonomous mode. They are designed for 20 atm working pressure with a test pressure of 30 atm.
- Special inner coating protects from rust and other aggressive chemical compounds in water.
- Surface monolithic layer prevents scratches.
- The maximum temperature regime is 135˚С.
- High heat dissipation- with standardized heat supply from the boiler room, it is 200 W for each battery element.
- The small internal volume of one radiator element makes it possible to achieve low inertia.
- The price is lower than for identical batteries in terms of technical parameters imported radiators.
- Give in temperature regulation.
- Radiators can be painted in any color.
- Can be combined with a different number of sections.
- Work guarantee - 10 years.
Features of installing Rifar batteries
All battery models of this Russian manufacturer are available with both bottom and side connections. This variability allows them to be used with various heating schemes. In private houses, the most attractive will be radiators with a bottom connection, and in apartment buildings with a side connection.
Rifar bimetallic radiators - installation features
A thermostat is mounted in the radiator casing, which eliminates the appearance of leaks at the places where the battery is connected to the pipe, and also allows you to control the temperature in the room without buying additional equipment. These radiators are equipped with standard fixing and shut-off valves, so they can be installed independently.
Radiators Rifar reviews
Rifar bimetallic radiators have not only positive reviews. But despite the negative comments about the thread for attaching to pipes, the developers have already eliminated this problem, so modern models will be an excellent choice for buying and installing in a private house.
Range of radiators Rifar
Models of this brand differ in the following indicators:
- center distance;
- overall dimensions;
- thermal power;
- the volume of the coolant;
- mass;
- design.
The technical parameters of one radiator element depend on the distance between the radiator axes, which is indicated in the name of the radiator.
| Rifar Element Parameters | Base 200 | Base 350 | Base 500 |
| Height, cm | 26,1 | 41,5 | 57,0 |
| Width, cm | 7,9 | 7,9 | 7,9 |
| Depth cm | 10,0 | 10,0 | 10,0 |
| Weight, kg | 1,02 | 1,36 | 1,92 |
| Heat transfer, W (at t = 70˚ C) | 104 | 136 | 204 |
The price of these devices is 480 rubles, 490 rubles, and 500 rubles. per section. These are basic radiators, suitable for any typical apartment.
The ALP series is long and shallow, and is very convenient for indoor use. with large windows and narrow window sills.
FLEX series radiators can receive any degree of curvature, and look good in rooms with a non-standard layout such as concave or convex walls.
VENTIL series radiators can be called universal. This is equipment in which the coolant can be antifreeze or oil.
The MONOLIT series is designed for systems with poor-quality heat carrier and high working pressure, the internal part of the structure of this device is made in one piece, not divided into sections.
ALUM radiators can work as oil heating devices, distinctive properties - a different design of vertical channels, there is plug and gasket.
FORZA series is an improved BASE radiator, its top layer is even more resistant to mechanical damage.
The cost of Rifar radiators depends on from the number of sections, necessary to create comfortable indoor conditions. And the number of sections directly depends on the size and thermal insulation of the heated room. You can choose a different layout, the important condition of which is that the radiator must be equal to the length of the window opening or be 2/3 of its part.
Average price of Rifar radiators
| Name | Heat transfer, W | Section price, rub. |
| BASE 200 | 104 | 425 |
| BASE 500 | 204 | 443 |
| MONOLIT 350 | 134 | 610 |
| MONOLIT 500 | 196 | 620 |
| ALUM 350 | 153 | 405 |
| FORZA 500 | 202 | 490 |
| FORZA 350 | 190 | 490 |
Positive aspects of Rifar
- Rifar radiators are products of a domestic manufacturer, therefore, the price is pleasantly pleasing in comparison with imported heating devices.
- A large number of models, among them there are aluminum options.
- Equipment during operation does not require unnecessary worries. Apart from the fact that the water used in them must be pre-treated, the system works perfectly. And if you buy Monolit, then these restrictions are not needed at all.
- A special anti-corrosion coating protects the inner surface of the batteries from the active chemical composition of the coolant and the appearance of rust.
- Powder paint protects against mechanical damage and scratches.
- The duration of quality work guaranteed by the company is from 10 to 25 years.
- The interesting design of Rifar heating devices is able to add an original touch to the decoration of the room.
Comparison with other models on the market
Typically, radiators are selected for their ability to withstand system pressure and heat dissipation. You can compare the technical parameters of Rifar radiators with heating devices Sira and Global.
The Italian company Global has been producing radiators for over 30 years. All models are designed for the conditions of Russian reality, have a reinforced structure and can be installed in our heating systems. The main attention was paid by the developers of the company quality, durability, reliability and design. Global radiators undergo two-stage painting, as in the automotive industry. They have stable anti-corrosion properties and high heat transfer.
The Italian firm Sira is a longtime partner of the holding company SanTechKomplekt. Aluminum and bimetallic radiators supplied by this company to our country are suitable for work in any heating system. They come from the manufacturer in paired sections, the edges of the radiators have rounded shape, to avoid injury in families with children.The technical parameters of the radiators comply with the SNiP requirements for the operation of devices in urban heating systems, for example, Gladiator batteries are perfectly operated at operating pressure 35 atm, they have a shallow depth, which saves space, high anti-corrosion parameters, there is no noise when the coolant passes. Syrah radiators can be easily installed, the package includes all the necessary installation elements.
Rifar radiator models, their disadvantages and advantages
The company has won the leading position in the bimetallic radiator market thanks to the constant modernization of equipment and the use of the most modern materials. Rifar radiators are manufactured in accordance with European standards, have the En 442 quality certificate, while they are guaranteed to withstand the operating conditions in urban and private heating systems in Russia. Like all technical devices, these devices have their pros and cons, we will consider them in more detail.
Rifar Colored Radiators
disadvantages
Despite the fact that Rifar bimetallic radiators are distinguished by good consumer performance, they are not devoid of certain disadvantages. The main disadvantage of the heating devices of this company is associated with the fact that they are not completely bimetallic. It is believed that a full bimetal is much stronger and demonstrates greater heat transfer, but it all depends on the quality of the installation and the build quality of the radiator itself.
Another drawback that Rifar batteries have is a weak thread. On the forums, you can find feedback on the problem and how to solve it. In fairness, it should be noted that almost any model of radiators has disadvantages, so let's move on to the advantages.
Benefits
Rifar radiators - specifications
The main advantage of Rifar radiators is their affordable price. This parameter is ensured due to the fact that Rifar is a Russian company; expensive imported units are practically not used in its products. The batteries are produced according to the technology: "partial bimetal using spot welding", which also significantly reduced the cost of production.
Rifar radiators - scope of delivery
The company offers its customers a wide range of batteries for different modes of use, such as:
- models that work only on a certain type of coolant, for example, only on filtered, soft water;
- Rifar batteries that work equally well with tap water of any hardness;
- models working with antifreeze and water.
Bimetallic Radiator Price Table
| Name | Number of sections | Price in rubles |
| Rifar Monolit Ventil 500 | 6 | 5936 |
| Rifar Monolit Ventil 350 | 6 | 5860 |
| Rifar Monolit 500 | 6 | 4048 |
| Rifar Monolit 350 | 6 | 3660 |
| Rifar ALP 500 | 6 | 2820 |
| Rifar Base 200 | 6 | 2880 |
| Rifar Base 350 | 6 | 2682 |
| Rifar Base 500 | 6 | 3000 |
| Sira Gladiator 200 | 6 | 3180 |
| Sira Gladiator 350 | 6 | 3240 |
| Sira Gladiator 500 | 6 | 3300 |
| Global Sfera 350 | 6 | 3774 |
| Global Sfera 500 | 6 | 3834 |
| Global Stile Extra 500 | 6 | 4200 |
| Global Stile Plus 500 | 6 | 4200 |
| Global Stile Plus 350 | 6 | 3960 |
| Smart 500 | 6 | 1740 |
| Vector Lux 500 | 6 | 2100 |
| Royal Thermo Trend 500 | 6 | 2520 |
Rifar Monolit bimetallic
I want to talk about this model range separately, since it compares favorably with previous systems, this feature significantly expands the technical potential, makes it possible for these batteries to work in the most unfavorable conditions, where the coolant is not of the proper level, and the system has high working pressure.
The appearance of these radiators is not original, but if you look inside, the differences will be obvious. Monolith Rifar is installed exclusively with metal pipes with the highest corrosion resistance. They are welded in such a way that the coolant moves along a single contour, that is, the inner part is one-piece and is not divided into sections, therefore leaks with such a structure are excluded. Available in sizes 300 and 500 mm. It is impossible to separate these sections, so when buying, you need to immediately calculate the required length of the radiator.
The heat dissipation of these radiators is excellent. This result is achieved due to the peculiar shape of the heat-transferring aluminum surfaces, their fins are slightly increased. For example, Monolith Rifar 300 has a heat dissipation of 136 Wand a similar 500 - 196 watts.
This design allows you to increase the properties of the radiator and significantly increase the service life, up to 25 years.And at the permissible temperature of water when it is supplied from boiler rooms of 95 degrees, it also perfectly withstands 135, because in the northern regions during cold winters, these parameters often increase, otherwise severe frosts simply cannot be survived.
For the minimum number of rifar Monolith 500 sections, and there will be 4 of them in the kit, you will have to pay 3200 rubles, and for 14 sections the price will rise to 11 200 rubles.
The main differences and types of bimetallic radiators
It is quite difficult to decide on the choice of heating elements, you need to be guided not only by prices, the main factor in choosing a heating device is the calculation of the required thermal power. Each model has its own technical characteristics, which must indicate the power.
There are low power models designed for small apartments with small rooms. We offer medium power models for heating apartments, private houses, cottages, offices, municipal buildings (hospitals, schools, etc.), shops. And also models with increased power are produced for heating large areas, warehouses, industrial premises.
If you are planning to buy a bimetallic radiator for heating a house or apartment, you should not buy units with a capacity greater than the calculation showed you. The power must fully correspond to the area of the room, this will help avoid unnecessary costs.
Be sure to pay attention to the working and pressure test pressure of the product. Beforehand, find out what is the pressure in your heating system, and at what pressure the system is checked on the eve of the heating season. Experts recommend taking devices with a pressure reserve.
To select the unit, you need to know the diameter of the supply pipe, of course, today there are various adapters, but it is better to do without them in order to increase the reliability of the system and avoid possible leaks.
The technical characteristics of bimetallic radiators are not the only difference. Depending on the modification and series, the equipment differs in size. The required size is determined by the window sill area reserved for the installation of the unit; there are models for a narrow window sill area and models, the dimensions of which reach 2 meters.
Heating batteries Rifar
The high-tech powder coating line ITW Gema GmbH guarantees the quality and durability of the coating. Finished radiators are packed in thermal foil, so that the products retain their original appearance after transportation and installation. Especially for the convenience of buyers, a second thermo-packing is made, and packing in pallets. Strict quality control is carried out at all stages of production.
Scientists, technologists, designers and constructors are involved in the development and design of new product models. The production process using modern equipment involves the involvement of highly qualified engineering and technical personnel. Therefore, the company's management provides training and advanced training for employees, both in Russia and abroad.
Radiators "Monolith"
The popularity of this modification is primarily due to its increased reliability and versatility. At the moment, bimetallic radiators "Rifar Monolith", reviews of which are actually very good, are sold out the best and represent a worthy replacement for more expensive imported brands. For example, the same Global. When using Rifar Monolith, you can pour not only water into the heating system, but also antifreeze.
The main distinguishing feature of the model is the absence of prefabricated parts. As the name suggests, these batteries are a single monolith. Of course, this minimizes the risk of leaks. If you wish, you can buy such a radiator, consisting of 4 - 14 sections.In addition, "Monoliths" are produced with the distance between the axes of 350 and 500 mm. The second type is the most popular and can be used in heating systems in very cold rooms.
Buy heating radiators Rifar at an affordable price in Moscow
The company's field of activity includes successful cooperation with organizations in Russia and Europe.
Rifar has been cooperating with many partners for many years. The company takes an active part in the international exhibitions Aqua-Therm and MATTEX. Water and heat in your home ”, presenting new products. Participation in such conferences as "Moscow: Problems and Ways to Improve Energy Efficiency" and "Software for Heating Systems" provides an opportunity to keep abreast of problems and innovations related to heat supply issues. Numerous articles in magazines such as "S.O.K." and "Aqua-Term" acquaint readers with the range of products and novelties of "Rifar". Due attention is also paid to product catalogs, which are constantly updated and contain images of bimetallic and aluminum radiators with projection views.
initially, a stake was placed on high-tech production equipment, independent of the human factor. Therefore, the industrial complex is equipped with advanced automated equipment from leading European manufacturers. Developing new models of high-performance radiators, the manufacturer strives to ensure that the products are not inferior in quality to the best world samples. The development takes into account the more severe climatic conditions in comparison with Europe and the specificity of heating systems in Russia. Thinking about the potential and prospects for the development of its production, it offers products in demand, which are subject to mandatory certification.
The modern production complex "Rifar" includes the maximum automation of production. The management has achieved high quality indicators of its products, which are not inferior in functional and aesthetic characteristics to the best European counterparts.
In industrial workshops, Italian-made melting gas furnaces are used, which carry out the melting and casting of aluminum. High-quality aluminum alloy from Russian suppliers, maintaining a constant temperature, accurate dosing of metal volumes allow minimizing waste costs in the production process. Mechanical robots MOTOMAN and ABB operate in an autonomous mode. The manipulator removes the finished casting, while monitoring the overall integrity of the product. Then it is sent to the conveyor to the chipping press. The section is assembled using special nipples on an automatic line.
Which radiators are better: sectional bimetallic or steel panel radiators?
Sectional heating devices made of steel and aluminum alloy have a huge number of advantages, one of which is the possibility of building up sections or, conversely, reducing their number. The price lists of manufacturers usually indicate the cost of one section and standard devices with an even number of sections from 4 to 12 pieces, in our online store you can order Italian Rifar radiators of any configuration.
But the main guarantee of popularity is a successful combination of metals, steel itself is a fairly strong material, but its thermal conductivity is less than that of aluminum. Aluminum has the highest heat dissipation, but does not have sufficient rigidity.
The combination of aluminum and steel is a unique find that has become a real breakthrough in the development of heating technology. Panel heating units are significantly inferior to their bimetallic counterparts.The same width and height can have different depths, the number of plates and heating panels, which directly determines the power of the unit, but their heat transfer is much lower.
Radiator characteristics
Bimetallic heating radiators "Rifar" are designed for installation and use both in office buildings and in residential premises of houses and apartments. They are designed specifically for the local heating system with a certain pressure and heat carrier.
- Products are made of two metals - the inner part of the coolant tanks is made of steel, and the body is made of aluminum. The case is the "face" of the product and gives the batteries a neat and elegant look, as the panels are coated on top.
- Internal cavities for moving the coolant are quite reliable and calmly withstand a pressure of 30-40 atmospheres. And aluminum, in itself, is an excellent conductor of heat, being heated from steel parts, it transfers heat energy well to rooms.
- When operating such radiators in an autonomous system, a large amount of coolant is not required - only 0.2 liters are needed for one section. Therefore, the circuit heats up very quickly, and it is quite possible to save on heating large rooms. This parameter of batteries can be safely attributed to their positive qualities.
- Steel parts of Rifar radiators can easily withstand temperatures up to 130 degrees.
- The heat output from each section is 180-200 watts.
