Comparative characteristics of popular models of Oasis radiators

How to make a choice

Having visited the stores of the relevant goods, you can come across devices that are most often made in China, Russia and Italy. Many of them are made for high pressure and long lines. This is typical for heating networks in Russia. The technology provides a variety of solutions for Oasis radiators, it can be the number of collectors, the method of fixing the elements, etc. That is why sectional and panel models are presented for sale.

Characteristics of bimetallic models of "Oasis" radiators

Oasis products are quite common on the market, radiators of this company are bimetallic and aluminum. In order to understand the pros and cons of products, you need to read the overview of the characteristics. For example, bimetallic batteries are made from steel and aluminum. Steel forms the basis of the grilles and the internal bulkhead. A feature of these models is that they are all composite. This allows you to increase the number of sections to the desired value, which depends on the conditions. Such options for radiators are designed for at least 30 atmospheres, so pressure surges are not terrible for them.

Among the advantages are:

• inertness to aggressive substances;
• no restrictions on use;
• increased strength.

As for the last characteristic, it can be noted that bimetallic radiators are capable of undergoing any water hammer in the system. However, there are also disadvantages, one of them is expressed in a higher cost compared to analogues.

Types of radiators Oasis

At the moment, the manufacturer Oasis is ready to offer its consumers several battery options:

• bimetallic;
• aluminum;
• steel.

Each type differs in characteristics, service life and, most importantly, has its own scope.

Bimetallic models

They are excellent, in the opinion of many consumers, heating devices, the production technology of which is debugged. Oasis bimetallic radiators can be used in rooms where a central heating system is installed, as well as in private houses where closed heating system.
Additional strength, durability of Oasis bimetallic radiators is due to the fact that high quality aluminum alloy is used for their production, and the core of the heater itself is made of low-alloy steel. This technological feature helps to exclude contact of the coolant itself with the metal, which confirms the safety of the devices.

The advantages of bimetallic models batteries are:

• Low cost of equipment.
• Modern quality, the use of new technologies in production means that we have strong and durable Oasis radiators.
• Due to its unusual composition, the radiator has a longer service life than models made of other materials.
• The bimetal heater is completely moisture resistant, it will not rust thanks to a special anti-corrosion coating.
• You can install the device in high-rise buildings up to 40 floors, since the steel tube inside each radiator is designed to work in conditions up to 60 atmospheres.
• Due to the presence of aluminum in the composition of the device, the thermal conductivity of the bimetallic heater is quite high.
• Any model is guaranteed.

Pressure surges such radiators are completely safe, because they are completely composite. Local conditions may dictate the number of sections, which is very convenient when using the instrument in different conditions. You will have absolutely no restrictions on the use of such an Oasis radiator.

The only thing that can upset a potential buyer is that the cost of a bimetallic heater model is slightly higher than the rest.

According to reviews, Oasis bimetallic radiators actually pay off. Most do not even suspect that the core of the heating devices is made of steel. It is thanks to this feature that these equipment models are capable of withstand high pressure, which is usually found in the heating systems of modern multi-storey buildings.

It is interesting that the external resemblance to an aluminum radiator in a bimetallic heater is enormous. They can easily be confused if not checked specifically.

Aluminum models

Such radiators are made using ordinary casting. The extrusion method is sometimes used. This method is used less often, it is inconvenient, first of all, because it is subsequently impossible to change the number of sections on the heating device. It is undesirable for the aluminum radiator model to contain any copper elements.
Advantages of Oasis aluminum heaters:

• The indisputable advantage of such radiators from Oasis is that they have a very high heat transfer. In the event that you install a heater in a closed system, you significantly save on electricity. Sometimes this can happen even by 30%.
• The room heats up very quickly, which is also facilitated by the aluminum housing of the devices.

Unfortunately, aluminum appliances have certain drawbacks. For example, such radiators are very sensitive to too high pressure. They are not durable, so you need to be extremely careful and try to follow all the rules for using such devices.

Some say that among the advantages of heaters made of aluminum can also be attributed to the fact that all models have enough little weight, but the appearance only pleases.

Why choose bimetal

Such radiators are chosen because of the all-steel manifold; manufacturing technology, which consists in injection molding; as well as a small volume of coolant, which provides high energy efficiency and low inertia. Bimetallic heating batteries are manufactured according to a certain technology, which provides for the application of durable paint in two layers at the final stage. As a result, it is possible to obtain a perfectly white color.

Reviews of steel radiators

In the process of manufacturing such batteries, a low-carbon metal is used, which is subjected to special heat treatment, degreasing and applying a protective layer. Such batteries are available in several versions, they can be supplemented with stiffening ribs. According to buyers, such batteries are sectional and tubular, the latter differ in less impressive wall thickness, while the former cannot be repaired, but are distinguished by increased strength.

Their cost is much higher, and the elements are connected by welding. Customers like the high efficiency, which is as high as 87%. It should also be noted the low inertia, which is expressed in slow heating and rapid cooling, which is also characteristic of aluminum radiators. Users note that steel radiators are susceptible to corrosion, so it is not recommended to drain the coolant during the off-season. If you want to choose such heating batteries, then you should take into account the specifics of pressure testing, the acidity of the medium and the nominal pressure.Steel radiators are suitable for private buildings, as well as houses with individual heating.

customer reviews, specifications, cost

One of the elements of the heating circuit is the battery. Manufacturers have filled the market with such a range of products that even specialists often find it difficult to choose. Judging by the statistics, the most bought are the Oasis radiators.

More often, there are devices of Russian, Italian or Chinese production. Many of them are specially made "for mains", characterized by high pressure values ​​in the pipes and their long length, which is typical for our heating networks. The technology provides for different engineering solutions for Oases (the number of collectors, the method of bonding elements and a number of others), which are determined by the properties of the starting materials. That is why they are of both panel and sectional type.

Features of the models

To better understand all the advantages and disadvantages of the products, we will make a brief overview of Oasis radiators, depending on their production technology:

1. Bimetallic. In the manufacture, 2 metals are used - aluminum + steel (internal bulkheads, grilles). The peculiarity of radiators is that they are all composite. This allows the number of sections to be increased to the required value depending on local conditions. Designed for at least 30 and they are not afraid of pressure.

Pros:

• Inert towards aggressive substances.
• Increased strength - withstands any possible water hammer (as well as increased pressure) in the system.
• There are no application restrictions.

Minus - the cost is higher than that of analogues.

Bimetallic Oases can be installed in any heating system.

2. Steel. In production, low-carbon metal is used, which undergoes special treatment - thermal, degreasing, applying a protective layer. Such Oasis radiators are available in several versions, including those with additional "stiffening" ribs.

Steel products are tubular and sectional. The former are distinguished by a smaller wall thickness, and the latter, although characterized by increased strength, cannot be repaired (welded connection of elements) and their cost is much higher.

Pros:

• High efficiency - 87%.
• Low inertia - they heat up slowly, but they do not cool down as quickly as aluminum ones.

Minus - susceptibility to corrosion, therefore, it is not recommended to drain water from radiators during the "off-season".

When installing in apartment buildings, one should take into account the peculiarities of the system and the heat carrier (specifics of pressure testing, nominal pressure and acidity of the medium). Suitable for "high-rise buildings" with IHP or private buildings.

3. Aluminum are made by injection molding (thicker walls) or by extrusion. In the latter case, it is impossible to change the number of sections. Judging by the description, the Oasis aluminum radiator has a surface protective layer made of polymers. The presence of copper elements (for example, pipes) in the circuit is undesirable.

Pros:

• The level of heat transfer is maximum. When installed in closed systems, fuel savings can be up to 30%.
• Fast warming up of the room.

Minuses:

• Sensitivity to high pressure (no more than 16 MPa).
• Insufficient mechanical strength, since the metal is soft, therefore, care must be taken during operation.
• It is necessary to constantly bleed air from the circuit, otherwise there is a risk of an increase in the hydrogen concentration in the pipes.
• Devices require careful handling, as the protective layer is easily damaged.

Aluminum radiators are suitable for installation in autonomous systems, but they should not be installed in central heating mains.

The common advantages of all models are their low weight and elegant design.

Cost and parameters of Oasis radiators

The price of an Oasis battery depends on its dimensions, the number of sections and the material of manufacture.

Model	Material	Dimensions, mm	Nominal pressure, MPa	Heat carrier temperature, ° C	Number of sections	Price, rub / section
350 – 80 (6)	Bimetal (with the possibility of increasing the number of sections). Qualitatively heats about 10 m2	413x80x80	25	110	6	385
SV - 500/12	Aluminum (prefabricated model). With 12 sections, it can heat up to 24 m2	580x80x80	10	100	4 – 12	375
OV - 11 | 3 | 04	Steel (panel type, non-separable, with bottom piping). Effectively heats up to 8 m2	400x300x68	16	120	1	from 2,200 per panel

Owner reviews about devices

“I was attracted by the good technical characteristics of the Oasis bimetallic radiator. I believe that for a city apartment, when you can expect any "surprises" from the system (pressure drops, water shocks, aggressive additives to the coolant), this is the best option. Although such Oases are more expensive, there is no need to worry about leaks. And the service life is high - about 15 years. "

Victor, St. Petersburg.

“I have read the information about all types of heating devices. According to reviews, the manufacturer of heating radiators Oasis is considered one of the leaders in this area. I decided to buy batteries of this particular brand, steel, since they were quite satisfactory for me both in terms of parameters and price. It is already the third year that they have been installed in the system, and so far there have been no complaints. The heat transfer is excellent, and the appearance is not like "cast iron".

Nikolay, Samara.

“I decided to buy Oasis Premium after I saw them in my relative’s house. They look elegant, and given the low weight and reasonable price, I did not even think about it - I replaced the old cast-iron batteries. They are easy to attach, and you don't need to paint all the time. 2 years of operation showed that I was not mistaken in my choice. As a budget option, such radiators are the most suitable. "

Alexey, Moscow.

termogurus.ru

Reviews of aluminum radiators

Quite often, consumers today choose Oasis aluminum batteries, radiators of this type are made by injection molding, the walls have a more impressive thickness. If the technology involves the use of the extrusion method, then there is no way to change the number of sections. As users emphasize, the "Oasis" aluminum radiator has a protective polymer layer on the outer surface, and copper elements are present in the circuit. The level of heat transfer is maximum, and if such a radiator is installed in a closed system, then fuel savings can be 30%. Users emphasize that with the help of aluminum radiators, it is possible to achieve a fairly rapid heating of the room.

Oasis radiators

Heating radiators have undergone significant technical improvements over the past decade. Radiators or heating batteriesused for hot water space heating are divided into several types. For example, aluminum radiators, steel radiators, cast iron radiators, bimetallic radiators and decorative (designer) heating devices. This conditional division of radiators into groups is due not only to their functional use, but also to the materials from which they are made.

Manufacturers of modern heating radiators offer consumers a wide selection of heating devices for different heating systems. Radiators and components for heating also by the method of heating - for example, electric or water. Electric radiators operate on mains voltage and consume electricity. Water radiator is part of a closed water supply system, and although it is more difficult to install, it does not dry the air in the room, and does not consume electricity.

In turn, heating radiators are also divided according to their technical characteristics and materials from which they are made. The most popular are aluminum heating radiators, as well as bimetallic radiators, steel and cast iron radiators... Let's consider the most popular types of radiators.

Aluminum heating radiators are lightweight because they are completely made of aluminum, provide high heat dissipation, and are resistant to corrosion. Aluminum radiators have an attractive appearance and an affordable price, thanks to which they are in demand among a wide consumer. The main application of the aluminum cast sectional radiator is when installing local heating systems in cottages, in the country or in an apartment.

Bimetallic heating radiators have an aluminum coating on a steel frame. These radiators have many advantages, the main of which are the resistance of the steel base to corrosion, and high heat transfer due to the properties of aluminum. Bimetallic radiators are more powerful, durable and can withstand water pressure over 20 atmospheres. Buy heating radiator bimetallic can be slightly more expensive than aluminum, but it is perfect for installation in an apartment with a common heating system.

Steel heating radiators are a budget solution when choosing heating batteries... Modern steel radiators have a stylish design and good thermal conductivity, and are practical to clean. However, they also have a number of disadvantages, including low operating pressure and the need for constant filling with water to avoid corrosion of the steel walls.

Plumbing Warehouse "OBS" offers its clients in Vladikavkaz, Rostov-on-Don, Nalchik, Makhachkala, Stavropol or Grozny a solution to the issue, where to buy heating radiators and accessories for them? Here you will find out the price of heating radiators in Rostov or Stavropol to get expert advice on the selection of the necessary radiators and make a profitable purchase. In our sanitary ware warehouse you can purchase:

— Chinese radiators wholesale; - Italian radiators wholesale; - Aluminum radiators wholesale; - Bimetallic radiators wholesale; - Cast iron radiators wholesale; - Steel panel radiators wholesale; - Radiators Global

Negative characteristics of aluminum batteries

Oasis aluminum radiators are pressure sensitive and can therefore be operated at 16 MPa or less. The mechanical strength of such products is not high enough, since the metal is soft, therefore, care should be taken during operation. When using aluminum batteries, it is necessary to bleed air from the circuit from time to time; if this is not done, then there is a risk of an increase in the concentration of hydrogen in the pipes. Among other things, the devices must be handled as carefully as possible, because the protective layer can be damaged. The described products can be installed in stand-alone systems, since the central heating mains create conditions that are not suitable for them. The overall advantages are low weight and attractive appearance.

Best inexpensive aluminum radiators

Among inexpensive heating equipment, it is quite possible to find aluminum radiators with good characteristics. They are also sold in sections, usually 4, 6, 8, 10 or 12 pieces as standard.

Oasis 500/70

4.9

★★★★★

editorial estimate

90%

buyers recommend this product

A series of aluminum radiators with a different number of sections, in addition to a low price, pleases with excellent characteristics. They have improved internal corrosion protection for extended service life.

The radiators are able to withstand pressures up to 24 atm during testing and show a high level of heat transfer.

The radiators are made in a classic design, have compact dimensions and do not require additional painting.The surface of the sections is covered with 7 layers of high quality white paint.

Advantages:

• Enhanced corrosion protection;
• 7 layers of staining;
• Resistant to high pressure in the system;
• Compact dimensions;
• High heat dissipation.

Disadvantages:

• Not suitable for heating systems with antifreeze.

Oasis 500/70 radiators can be used for connection to autonomous and centralized heating networks.

Monlan 500/70

4.8

★★★★★

editorial estimate

85%

buyers recommend this product

The lightweight and compact Monlan 500/70 series radiators are easy to install and can be easily handled by one person. They have thin walls in sections, which allows them to quickly heat up and dissipate heat.

The radiators are painted with a high temperature resistant paint that does not chip or turn yellow when heated to 75 degrees.

The working pressure of the radiators is 16 atmospheres, so they are ideal for autonomous heating. Although, according to the manufacturer, they can also be connected to a centralized system.

Advantages:

• Simple installation;
• Fast heating;
• High heat dissipation;
• High quality paint;
• Discreet design.

Disadvantages:

• Thin rear ribs that can be bent during assembly.

At home or in the country, Monlan 500/70 radiators will be a profitable solution for arranging an efficient heating system.

Tessen 500/60

4.6

★★★★★

editorial estimate

83%

buyers recommend this product

Aluminum radiators of the Tessen 500/60 series are made in a modern style. They are compact in size and resistant to high-class white paint.

The devices are designed for wall mounting and connection to centralized and autonomous heating. Radiators are used for the water system and therefore have good protection against rust formation.

The series belongs to one of the most budgetary ones - it will not be possible to find something of the same quality on the market cheaper. At the same time, the batteries are characterized by good heat transfer and the ability to install any number of sections.

Advantages:

• Low price;
• Modern design;
• Persistent staining;
• Universal application;
• High corrosion resistance.

Disadvantages:

• Designed for side connection only.

Tessen 500/60 radiators will perfectly fit into the interior of a modern living room or office.

READ ALSO

How to choose a heating radiator for an apartment and a private house

Specification of some models

Oasis radiators, reviews of which you could read above, are offered for sale in a large assortment. Among the most common models, 350/80 (6) can be distinguished, which is a bimetallic product capable of heating an area of ​​up to 10 m2. If necessary, bimetallic radiators "Oasis" can be supplemented with sections. The dimensions of the described model are 413 x 80 x 80 mm. As for the nominal pressure, it is 25 MPa, while the temperature of the coolant is 110 ° C. The number of sections for this model is six, for one of them you will have to pay 385 rubles.

If you wish, you can choose an aluminum radiator of the SV - 500/12 brand, which is prefabricated and is capable of heating a room up to 24 m2. The dimensions of the model are 580 x 80 x 80 mm, but the nominal pressure is significantly lower compared to the above model and is 10 MPa. The coolant temperature can reach 100 ° C, the number of sections in the model varies from 4 to 12, and the cost of one of them is 375 rubles.

A wide range of products of the Oasis brand is offered today, radiators of this manufacturer can be steel, one of them is the OV - 11/3/04 model, the dimensions of which are 400 x 300 x 68 mm. This non-separable panel radiator has a bottom connection. And it can effectively heat a room with an area of ​​8 m2. The nominal pressure that the radiator can withstand is 16 MPa.As for the maximum temperature of the coolant, it is 120 ° C. The radiator has one section, for which you will have to pay 2,200 rubles.

Wholesale corporate gifts for logo application

Souvenirs with a company logo are much preferable to regular faceless gifts for several reasons:

• Branding is the same advertisement that will work for you all the time.
• The production of souvenirs with the company logo speaks of the status of the company.
• You are giving truly unique, "branded" gifts that you definitely cannot find on sale.
• If you need quality souvenirs with a company logo, you can order them inexpensively from Oasis. On our site you will find everything: from unpretentious key rings to exclusive products.

Why should you buy souvenirs with your logo from us?

You can put your logo on any souvenir. We work with all types of materials. Therefore, we can offer you souvenirs with the application of your organization's logo by means of pad printing, silk screen printing, sublimation, laser engraving, etc.

You are buying unique products. Our catalog contains original advertising and business souvenirs with a logo. And some of them you will not find anywhere else, since Oasis has exclusive contracts with many manufacturers.

Your ad will work as long as possible. We order souvenir products only from trusted manufacturers. Moreover, quality, safety and compliance with the declared technical characteristics are additionally tested at the quality control center in Guangzhou.

Here you will find gifts for a variety of purposes. Our catalog contains over 17,000 products. Our souvenir products with the company logo differ in price, status, scope, etc. We offer products from over 50 different brands, most of which are familiar to everyone: Jean Paul Gaultier, Montblanc, Parker and others. For your convenience, all souvenirs are also divided into catalogs.

You can familiarize yourself with the product before purchasing it. Before ordering gifts in bulk, you can personally see promotional souvenirs for applying a logo in our showroom in Moscow. Also, you can always order trial samples, and we will send them as soon as possible.

Forgot to order souvenirs in advance? If you call right now, you can still make it. Thanks to high-performance equipment and streamlined workflow, all branding activities take us mainly from 3 to 5 days. And at the expense of our own logistics department, we can deliver up to 600 orders per day without losing speed and quality.

You can contact us by phone +7 (495) 969-24-50.

Performance reviews

Oasis radiators are popular with modern consumers because they have many advantages. Buyers are attracted by the excellent technical characteristics of bimetallic models. For the reason that the heating system in a city apartment can give out any surprises such as pressure drops, the presence of aggressive additives in water and water hammer, the best option, according to buyers, is precisely the bimetallic model. Such radiators cost a little more, but you can not be afraid of leaks, and the service life is quite high, it can reach 15 years.

Oasis radiators, reviews of which are often the most positive, are popular with consumers also for the reason that they are a good combination of price and quality. Some believe that this manufacturer is one of the leaders in this area. A number of buyers are quite satisfied with the steel models, which are installed in stand-alone systems and have been working flawlessly for several years. Heat transfer from such models is high. And the appearance is quite attractive, which is especially noticeable after there were cast-iron radiators in the house.

Russian manufacturer with European quality level

The steel panel radiator Oasis is manufactured in Russia, which means that the manufacturer knows the features of domestic heating systems and fits the models to their parameters. The company gives its products from 15 to 20 years of warranty, depending on the type of panel batteries.

The advantages of such radiators:

1. The company's products are capable of withstanding water shocks up to 16 atmospheres provided that they occur infrequently.
2. Special spraying of polyepoxy paint creates additional protection for the product, which increases its service life.
3. Steel panel radiator Oasis available with side or bottom connection and can consist of only panels, for example, types 10 and 20, or have additional heat exchangers, as in models 21, 22 and 33.

Domestic manufacturers have long been competitive in the market of thermal technologies and benefit not only in price next to their foreign counterparts, but also in quality.