Here you will find out:
- Features of Galan boilers
- The principle of operation of the Galan electrode boiler
- Basic models of Galan boilers
- Galan electrode boilers - user reviews
Electric heating equipment is used to create heating systems in buildings that are not connected to gas mains. This is not to say that this is the cheapest way of heating, but sometimes it is the only acceptable one. In order to make heating more economical, it is necessary to purchase a Galan electrode boiler, the principle of which is to heat the coolant without heating elements.
In this review, we'll look at:
- Principles of ion heating in Galan heating boilers;
- Popular boiler models;
- User reviews.
After reading the material, you can make your choice and decide whether you need electrode boilers or not.
Features of Galan boilers
Scheme of operation and device of the electrode heating boiler.
Galan electric boilers have been produced for more than 20 years, since 1994 - this is the year when the plant's production facilities were launched. A few years later, the company began manufacturing electrode boilers using proven military technology. As a result, reliable heating equipment was born, which is distinguished by efficiency and safety.
Efficiency is achieved due to the design features of the equipment - Galan electrode boilers heat the coolant directly, without the use of slow and not always efficient heating elements... As for safety, everything is simple here - in the absence of a coolant, the supply of electricity to the electrodes stops. But one could do without this, since an air gap is formed between the electrodes without a coolant.
Conventional heating elements often cause fires, since in case of an accident in the system and the disappearance of the coolant, the heating elements remain running, which causes them to overheat and ignite.
What are the advantages of Galan electrode boilers? First of all, their long service life should be noted, since there is practically nothing to break here. There are no heating elements here, in their place are electrodes that heat the coolant. Even if they fail, they can be easily replaced - for this, replaceable electrodes are on sale. In addition, the electrode circuit affects the efficiency of the equipment, since the rooms are warmed up much faster.
Thanks to this scheme, you will be able to appreciate the ease of installation and dimensions of Galan electrode boilers.
Electric boilers have minimal dimensions - there are no bulky combustion chambers, large gas burners and other large-sized units. As for the electrode models, they are even more compact, since they have a very small ionization chamber. Due to their diminutive size, they do not take up much space in boiler rooms and in other rooms - ideal choice for small residential buildings.
Galan electrode boilers are distinguished by the fact that they create a higher pressure in heating systems. Due to this, an even faster heating of the premises is achieved. If you need to create heating for a one-story private house, then you can do without a circulation pump. Sometimes the following scheme is used - first, the coolant circulates with the help of a pump, and then switches to natural circulation. With a small area of home ownership, a circulation pump is not needed.
Sale of electric boilers and water heaters.
Dear users, residents of Noginsk, Elektrostal, Pavlovsky Posad and the region, in this section we offer you heating and hot water boilers.They are of two, the most common types: conventional heating boilers and electrode boilers.
What is the difference between electrode boilers and others? Their fundamental difference is that special electrodes do not heat nearby molecules of the coolant (water or antifreeze), but act immediately on the entire volume of the medium between the electrodes. This increases efficiency, saves electricity ... and as a result, we can heat a larger room with a lower power boiler!
Electric heating boilers are the easiest and safest way to heat water in conditions where there is no heating system and gas supply... It is enough to have a 220V outlet for their full operation. They can be placed anywhere from the bathroom to the living room. From the point of view of design, they are safe, since they are well protected from leaks and interaction with current and electrodes.
Modern electric heating boilers are comfortable to use, they are equipped with sensors, displays and a simple temperature control system.
Due to its compact size and light weight, the boiler saves space in the house (for mounting the boiler, 1 square meter is enough on the wall in any room), and installation and installation can be carried out by one specialist without resorting to outside help.
An important advantage of electric boilers is their ease of use.
The heating system is adapted to the rhythm of your daily life. Electric heaters are equipped with automation, which allows the consumer not only to set the desired temperature of the radiators or the air temperature in the room, but also to automatically maintain it around the clock, turning the electric heater on and off.
The electric boiler adjusts itself to the power consumption and automatically shuts off when the set temperature of the radiators or room air is exceeded. The system also automatically stops working in the event of a short circuit, overheating of the wires supplying current, or when a liquid leaks in the heating system.
Ease of operation also ensures the use of a special coolant in the heating system, which can be kept from the heating system during a long break in the use of the boiler, even in winter (for example, in the country). Heat carrier "Galan" for electrode boilers does not freeze up to - 40 C.
Advantages of electric boilers:
- • Profitability provided by: high efficiency (up to 98%), the ability to program operating modes at different times of the day, no maintenance costs, low cost of equipment;
- • Simplicity of installation and operation;
- • Safety;
- • Small size;
- • Silent work;
- • No need for fuel reserves;
- • Possibility of installation both on a new heating system and on an existing one;
- • Possibility of parallel connection with other boilers;
- • Environmental integrity.
| Electrode heating boilers GALAN | ||
| GALAN OCHAG | GALAN OCHAG-3 Electrode heating boiler GALAN-03 (2 and 3 kW) - the "smallest" heating boiler manufactured by GALAN Specifications: (expand / collapse)
| RUB 3,500.00 (2 kW) RUB 3,550.00 (3 kW) |
GALAN OCHAG-5 Electrode heating boiler with a power of 5 kW. Specifications: (expand / collapse)
| RUB 3,600.00 | |
GALAN OCHAG-6 Electrode heating boiler with a capacity of 6 kW. Specifications: (expand / collapse)
| RUB3,650.00 | |
| GALAN GEYSER Electrode heating boiler "GALAN-GEYSER". The most popular series of electrode heating boilers GALAN. | GALAN GEYSER-9 Electric boiler with a capacity of 9 kW Specifications: (expand / collapse)
| RUB 6,800.00 |
GALAN GEYSER-15 Electrode heating boiler with a capacity of 15 kW. Specifications: (expand / collapse)
| RUB 7,100.00 | |
| GALAN VOLCANO | GALAN VOLCANO-25 Electric heating boiler GALAN-02U Specifications: (expand / collapse)
| RUB 7,400.00 |
GALAN VOLCANO-50 Electric heating boiler GALAN VOLCAN-50 - the most powerful of the GALAN electrode boilers Specifications: (expand / collapse)
| RUB 12,300.00 | |
| Heating element heating boilers GALAN "STANDARD" | ||
| GALAN OCHAG-TURBO | Hearth Turbo 3 kW Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 5,200.00 |
Hearth Turbo 4.5 kW Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 5,500.00 | |
Hearth Turbo 6 kW Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 5,900.00 | |
Hearth Turbo 7.5 kW Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 6,300.00 | |
Hearth Turbo 9 kW Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 6,800.00 | |
| GALAN GEYSER TURBO | GALAN GEYSER TURBO-12 Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 7,800.00 |
GALAN GEYSER TURBO-15 Electric boiler based on new generation heating elements using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 8,200.00 | |
| GALAN VOLCANO TURBO | GALAN VOLCANO TURBO-18 Electric boiler based on heating elements of a new generation using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 10,800.00 |
GALAN VOLCANO TURBO-24 Electric boiler based on heating elements of a new generation using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 11,900.00 | |
GALAN VOLCANO TURBO-30 Electric boiler based on heating elements of a new generation using the latest imported materials. It is recommended to use in a set with GALAN-NAVIGATOR Specifications: (expand / collapse)
| RUB 12,100.00 | |
| Heating elements heating boilers GALAN "LUX" | ||
| Electric boilers "GALAX" The GALAX boiler belongs to devices operating in closed-type heating systems with forced circulation of the heat carrier. The boiler operates in automatic mode with minimal maintenance. The device is equipped with systems that protect against heating wiring accidents: a tracking system for the coolant flow, a safety valve. The boiler is also equipped with a circulation pump, a pressure gauge and an automatic air vent valve. | Electric boiler "Galax-9" Electric heating boiler GALAX-9 (9 kW) Specifications: (expand / collapse)
| RUB 27,000.00 |
Electric boiler "Galax-12" Electric heating boiler GALAX-12 (12 kW) Specifications: (expand / collapse)
| RUB 27,400.00 | |
Electric boiler "Galax-15" Electric heating boiler GALAX-15 (15 kW) Specifications: (expand / collapse)
| RUB 28,500.00 | |
Electric boiler "Galax-18" Electric heating boiler GALAX-18 (18 kW) Specifications: (expand / collapse)
| RUB 30,250.00 | |
Electric boiler "Galax-21" Electric heating boiler GALAX-21 (21 kW) Specifications: (expand / collapse)
| RUB 31,100.00 | |
Electric boiler "Galax-24" Electric heating boiler GALAX-24 (24 kW) Specifications: (expand / collapse)
| RUB 31,800.00 | |
Electric boiler "Galax-27" Electric heating boiler GALAX-27 (27 kW) Specifications: (expand / collapse)
| RUB 32,600.00 | |
Electric boiler "Galax-30" Electric heating boiler GALAX-30 (30 kW) Specifications: (expand / collapse)
| RUB 33,500.00 | |
| Electric heating boilers "STELS" STELS electric boilers are designed for heating residential buildings, cottages, garden houses, multi-storey apartment buildings, garages, bathhouses, premises and buildings of utility, commercial, public, industrial and agricultural purposes, as well as other structures in the absence or inefficiency of centralized heating. Electric boilers "STELS" are used only in closed heating systems. There are no combustible materials in the construction of boilers, therefore our boilers are fireproof. The boilers are used in three-phase networks. The boiler body is made of steel profiles. | Electric boilers "STELS-9" Electric heating boiler "STELS-9" (9 kW) Specifications: (expand / collapse)
| RUB 19,100.00 |
Electric boilers "STELS-12" Electric heating boiler "STELS-12" (12 kW) Specifications: (expand / collapse)
| RUB 19,450.00 | |
Electric boilers "STELS-14" Electric heating boiler "STELS-14" (13.5 kW) Specifications: (expand / collapse)
| RUB 19,750.00 | |
Electric boilers "STELS-18" Electric heating boiler "STELS-18" (18 kW) Specifications: (expand / collapse)
| RUB 21,350.00 | |
Electric boilers "STELS-21" Electric heating boiler "STELS-21" (21 kW) Specifications: (expand / collapse)
| RUB 22,000.00 | |
Electric boilers "STELS-24" Electric heating boiler "STELS-24" (24 kW) Specifications: (expand / collapse)
| RUB 22,600.00 | |
Electric boilers "STELS-27" Electric heating boiler "STELS-27" (27 kW) Specifications: (expand / collapse)
| RUB 23,150.00 | |
| Heating automatic equipment "GALAN" | ||
| Automation for control of heating systems equipment The use of heating control devices can significantly reduce energy costs and reduce costs. Remote systems allow you to control the temperature in your room from anywhere in the world where there is a GSM cellular connection. | A series of two-channel electronic temperature controllers NAVIGATOR N and NKT | |
| GALAN NAVIGATOR LUX 6 The temperature regulator "Navigator Lux 6" has a built-in electronic control device based on a processor with non-volatile memory. The key switch allows you to turn on and off the thermostat. When the thermostat is turned on, the indicators of the heating system heating stages (1,2,3-initial stage; 1,2-middle stage; 1-end stage) light up a digital temperature indicator, an indicator of temperature sensors (return or supply). Continuation of the description and technical characteristics: (expand / collapse) The control knob is used to select a setting parameter (return temperature or flow temperature). The parameter is selected by pressing the knob. You can change the parameter value (return temperature or flow temperature) by turning the knob while the indicator of the selected temperature sensor (return or flow) is flashing. After a few seconds after changing the parameter, the indicator of the selected sensor will stop flashing and the digital indicator will display the temperature of the selected sensor. The control parameter is the return temperature. The flow temperature is selected so that it cannot be reached under normal operating conditions. If an abnormal situation occurs (the circulation pump stops working, the heating system is airy, the filter is clogged, or any other reason that has led to a deterioration in the circulation of the coolant) and the flow temperature has exceeded the set one, the built-in electronic control device will turn off the heating. The heating will turn on after the heating system has cooled down by about 9 degrees.In the upper part of the body there are connectors for connecting room thermostats "Istopnika-103", -203 "and a heating equipment control system" Galan-GSM ". Distinctive features of Navigator-Lux thermostats:
SPECIFICATIONS:
| RUB 5,400.00 | |
GALAN NAVIGATOR 6NKT The Navigator-6NKT control unit is designed to control electrode-type boilers and is a continuation of the range of Navigator H-type thermostats. These models of regulators are equipped with a current control unit, which, when the rated value is exceeded, turns off the boiler. After 3 min. the boiler is switched on again until the current strength exceeds the nominal value. The number of reconnections is not limited. Exceeding the rated current is indicated by a two-color LED indicator. Red light means current limiting is active, green light means normal operation. Specifications: (expand / collapse)
| RUB 6,950.00 | |
| GALAN NAVIGATOR 9N Multifunctional microprocessor control unit "Navigator-9N" is designed to form the required algorithm for the operation of electric heaters (electric water heaters of electrode type, heating elements boilers, electric heaters, heat "guns", curtains, etc.) single-phase or three-phase electric power up to 9 kW. Continuation of the description and technical characteristics: (expand / collapse) Temperature control is carried out through two channels of the flow and return pipes. The control unit consists of: a modular plastic case, a multifunctional electronic regulating temperature indicator with attached temperature sensors, an automatic shutdown, a modular contact, a zero bus, grounding buses, a circulating pump control circuit fuse, a pump connection terminal. The control unit provides for the connection of the room temperature regulators "Istopnik-103", -203 "and SSKOO" Galan-GSM ". The thermostat can work in the "Run" or "Program" mode. In the "Programming" mode, it is possible to change the operating parameters: the control temperature at the input (return) and output (supply), the value of the difference between the on and off temperatures (hysteresis) along the return channel. SPECIFICATIONS:
| RUB 6,400.00 | |
GALAN NAVIGATOR 9KT The Navigator-9NKT control unit is designed to control boilers of the electrode type and is a continuation of the line of temperature regulators of the Navigator N. These models of regulators are equipped with a current control unit, which, when the rated value is exceeded, turns off the boiler. After 3 min. the boiler is switched on again until the current strength exceeds the nominal value. The number of reconnections is not limited. Exceeding the rated current is indicated by a two-color LED indicator.Red light means current limiting is active, green light means normal operation. Specifications: (expand / collapse)
| RUB 7,400.00 | |
| GALAN SOURCE 103 The electronic room temperature indicator "Stopper - 103" is designed to measure the air temperature, display and set the temperature values on the indicator and generate a control signal for external devices to maintain the required temperature regime of the air in the room. Compatible with digital systems GALAN-NAVIGATOR and controls an electric boiler.
| RUB 1,850.00 | |
GALAN MRT-15 Electromechanical temperature regulator "MRT-15" is designed to maintain a predetermined thermal mode of operation of electric water heaters up to 6 kW at 220V or up to 15 kW at 380V. Temperature control is carried out in the range from 10 ° to 60 ° C according to the temperature of the return pipe. An overheating protection channel ensures that heating is switched off when the flow temperature reaches approx. 90 ° C Specifications: (expand / collapse)
| RUB 2,500.00 | |
GALAN ISTOPNIK 203 Electronic room programmable temperature indicator GALAN ISTOPNIK 203 is intended for setting daily or weekly cycles of maintaining the temperature regime of air in the room, displaying and setting on the indicator the necessary temperature and time parameters, generating a control signal for external devices. Fully adapted for GALAN-NAVIGATOR thermal control systems, it implements the energy saving mode. Specifications: (expand / collapse)
| RUB 2,850.00 | |
The specialists of our "Service Center" will help you choose and install the boiler or water heater you like.
* Prices for boilers are indicated as of summer 2014, ask our consultants about the cost of installation.
Choose a boiler "to your liking" !!! All warmth, comfort and good luck, dear fellow countrymen !!!
Free delivery across Noginsk, Elektrostal and the region is possible!
The principle of operation of the Galan electrode boiler
In electrode boilers, the coolant is heated by an alternating current supplied to the electrodes.
Galan electrode boilers are equipped with ionization chambers - their heart is located here. The chambers contain electrodes that are responsible for heating the coolant. An alternating current with a frequency of 50 Hz is applied to them, forcing the water molecules to disintegrate into positively and negatively charged ions, moving towards the electrodes with the opposite charge.Heat energy in electrode boilers is generated directly in the coolant, and not in heating elements, which ensures faster heating.
Ordinary water or special non-freezing liquids can be used as a coolant - they are manufactured by Galan.
The principle of operation of Galan electrode boilers is very simple. And today, on this principle, three model lines are produced at once:
- GALAN OCHAG - from 3 to 6 kW;
- GALAN Geyser - from 9 to 15 kW;
- GALAN Volcano - from 25 to 36 kW.
Electrode boilers GALAN OCHAG operate from single-phase electrical networks, and a three-phase network is required to power the GALAN Geyser and GALAN Volcano boilers.
To connect electrical equipment with a power of more than 3 kW, a separate electrical line with an RCD is requiredextending from an electrical panel. Equipment control is carried out using automation - it is carried out at the same enterprise, but purchased separately. It is also possible to purchase remote controls via a GSM channel.
Where to buy Galan electrode boilers and check prices? They are sold in many plumbing and heating equipment stores. If you want to purchase equipment at the most affordable price, use product aggregators and price comparison services.
Installation features
Installation of electric boilers is carried out between two pipes - supply and return
When installing a heating system using an electric Galant boiler, two pipelines are required. The upper line serves for dispensing, and the lower one for collecting the cooled coolant. When installing the system, take into account the manufacturer's recommendations for the materials used:
- The use of cast iron radiators negates the advantages of electrode assemblies.
- The elements of the system must have close electrochemical activity or be isolated upon contact.
- The first meter of the pipe must be made of non-galvanized metal.
The unit must be positioned vertically and above the radiators. The total power of the heating batteries should not exceed that of the boiler. The manufacturer advises to insulate the section from the boiler to the upper distribution pipe. This will reduce losses due to local overheating of the pipeline and accelerate fluid circulation.
The electric boiler must be grounded. To avoid problems with its operation in the event of a voltage drop, it is worth installing a current normalizer. When choosing a location for the temperature sensor, take into account the manufacturer's recommendations. They also rely on the instructions when pouring liquid into the system. Its volume should be 8-10 l / 1 kW.
Basic models of Galan boilers
Electrode boilers from the Galan Ochag line are the best choice for heating private houses up to 60 sq.m.
Electrode boilers from the GALAN OCHAG model range include models with a capacity of 2, 3, 5 and 6 kW. They have minimal dimensions and do not clutter up the premises.... All models are single-circuit and are designed for vertical installation. Power is supplied from single-phase networks. If you connect models with a power of 5-6 kW to the network, you need to connect a separate wire to the equipment and equip it with an RCD. GALAN OCHAG boilers are suitable for heating rooms with an area of 20-60 sq. m. is a great option for a private house.
The GALAN Geyser range includes two electric boilers with a capacity of 9 and 15 kW. They can be used to heat any type of premises, ranging from 90 to 150 sq. m. To power the equipment, it is necessary to connect to a three-phase electrical network. Control is carried out from external consoles. Installation is carried out exclusively in an upright position.
Do you need to create a heating system in a large building? Then you need to take a closer look at the line of electrode boilers GALAN Volcano - it includes models with a capacity of 25, 36 and 50 kW.All presented devices are powered by three-phase electrical networks. The maximum heated area for these models is from 250 to 500 sq. m, depending on the power of the equipment used.
Characteristics GALAN "Navigator Universal"
Supply voltage: ~ 220V Operating temperature: + 5… + 40 ° С Coils of connected contactors: ~ 220V 250mA Number of control channels: 3 Control of 3-phase electric boilers: Yes.
Adjustment ranges: Return temperature: 10-80 ° С. Serving temperature: 10-85 ° С. Hysteresis: 1-9 ° С (temperature difference between switching off and then switching on the boiler). Recommended values: Return: 35-40 ° C. Delivery: 70-75 ° С. Hysteresis: 3-5 ° C.
Work description
When the unit is turned on, an indication of the current return temperature appears on the display, a blue LED is on. Glowing of a dot in the upper left corner of the indicator means giving a signal to turn on the circulation pump. To reduce the peak load on the network, the heating stages are connected in series. 30 seconds after turning on the pump, the first heating stage is activated, 10 seconds after turning on the first stage - the second, then after another 10 seconds the third heating stage. As the heating system warms up, in order to increase the efficiency of the system, the heating stages are switched off one by one. At the temperature set minus hysteresis, the third stage will turn off, the set minus half of the hysteresis will turn off the second stage. And when the set temperature is reached, the heating will turn off completely. To cool down the boiler, the circulation pump, after the heating is turned off, runs for another 30 seconds and turns off. During the cooling-down period of the system, in order to equalize the temperature field, the circulation pump is switched on for 30 seconds every 5 minutes. When the system cools, the steps are also switched on alternately. When the maximum set flow temperature is reached, the heating is completely turned off until the temperature drops by 9 ° C.
The control parameter is the return temperature. The flow temperature is selected so that it cannot be reached under normal operating conditions. If an abnormal situation occurs (the circulation pump stops working, the heating system is airy, the filter is clogged, or any other reason that has led to a deterioration in the circulation of the coolant) and the flow temperature has exceeded the set one, the built-in electronic control device will turn off the heating. The heating will turn on after the heating system has cooled down by about 9 degrees. In the upper part of the body there are connectors for connection of Comfort room thermostats and Galan 05M heating equipment control system.
Advantages and disadvantages
Is it convenient to use this type of boilers for heating? I guess, yes. It is especially good in those places where the mains voltage is unstable: even when the voltage drops to 180 V, the electrode boiler continues to work. Its power drops, but it works further. What else is convenient for such a system: if there is competent automation and the correct connection of the boiler, the system is autonomous and can maintain the set temperature on its own. Another positive point: if, for any reason, water disappears from the system, the equipment will simply stop working. It will not burn out, will not deteriorate, but simply will not work, since water, in this case, is a working medium. If she is not there is no current.
One example of installing an electrode boiler
Now about the disadvantages. From the principle of operation of the electrode boiler, their main drawback emerges: exactingness to the composition of water. Not any water is suitable, but with certain characteristics. When starting the system, it is necessary to prepare the coolant according to the recommendations of the boiler manufacturer. This is usually a few teaspoons of salt or baking soda per liter of water in the system. That's all. You can also use special fluids that are produced by the same manufacturers.But this is for those who do not want to bother at all.
On the other hand, by changing the composition of the water, you can "adjust" the boiler power to suit your needs: in principle, you can make it work with both higher and lower power relative to that stated in the passport. It is only required to change the chemical composition of the coolant-electrolyte
Here it is important not to overdo it, otherwise you can "change" the composition until the boiler is completely and instantly out of order. Therefore, stay within the limits indicated by the manufacturer (as usual, "from" and "to" are indicated)
Another unpleasant moment. Even more. The current spreads in the water, and the water circulates in the system. And, in principle, the possibility is not excluded, having touched the radiator, to receive a considerable electric shock. This implies another indispensable condition for safe operation when using electrode boilers for hot water heating: high-quality and reliable separate grounding is required. It will just help to avoid such a situation.
Not the most pleasant moment - the need for periodic cleaning of the system and replacement of electrodes - they gradually become thinner and the heating efficiency decreases. In this, electrode boilers have no advantages over traditional electric boilers with heating elements.
Testimonials
Basically, there are reviews on the network about the Galan electrode boilers. Most of them are positive. But this is for those who have fulfilled the requirements for the installation and preparation of the coolant, have correctly connected the electrical part. In this case, people talk about the reliability of boilers and their efficiency: they work reliably and without interruptions without supervision, they are economical, they "keep" the temperature stably, they work silently.
There are owners who installed Galan Ochag 9 in parallel to a wood-burning boiler: it turns on at night after the wood burns out and the coolant cools down. Others have savings on bills 2 times compared to the previously available heating element.
There are the following negative reviews:
- The house burned down due to the fact that the boiler was hung on a wooden wall and connected through a 50A machine.
- The first year he warmed up normally, in the second he began to work worse. After preparing the water and flushing the system, the temperature rose, but not enough.
There are no other negative reviews, only messages from those who offer boilers of heating elements or other brands. Yes, and the available negative reviews indicate violations of the installation, but not that the boilers are bad or inoperative.
Nevertheless, electrode boilers have quite serious disadvantages that you need to know about before purchasing. Read more about the principle of operation, advantages and disadvantages of electrode boilers here.
