Installed gas boiler in the kitchen how to hide - photo

Solution 1. Safe placement of the boiler inside the furniture

It is advisable to start arranging a gas appliance at the stage of repair, when the kitchen unit itself has not yet been installed. Think, or better, sketch out how the room will look like at the end of the renovation work. Having shown imagination, you can easily decorate a not very aesthetic boiler in the interior.
A false cabinet in which a gas boiler is hiding is an excellent option for wall-mounted devices. The cabinet is made in the same design as the kitchen unit itself. Thus, there will be no visual difference between the boiler and the furniture.

Gas boiler in the kitchen in the closet

If the kitchen is made to order, it is necessary to warn the master that it is planned to install a boiler and that a separate box of appropriate dimensions is needed for it. The installation process begins with the installation of a cabinet without a bottom or roof. Further, a gas boiler is installed in it, and communications are connected. It is advisable to invite a gasman for these purposes so that there are no safety problems.

You can close the heating equipment in the kitchen without using additional cabinets if you show a little imagination. There are several options for hiding a gas boiler in the interior:

• stick a self-adhesive film on the front side of the device, which matches the color of the kitchen;
• decorate the cauldron with artificial plants;
• white appliances in the kitchen with a white set can be left unchanged by choosing a model with chrome plating or glossy enamel;
• paint the boiler in the color of the kitchen or walls. For these purposes, it is important to choose a non-toxic paint so that when the device heats up, it does not release chemicals;
• disguise in decoupage style. More suitable for rooms in retro style or Provence.

Gas boiler in the kitchen, as part of the interior

Some manufacturers took care of the design in advance and released devices with beautiful monochromatic or colored designs.

The method of decorating a box for a gas boiler made of plasterboard is similar to installing it in a kitchen set. To do this, at the intended location of the boiler, a frame from a profile is mounted, stepping back 5-6 cm from the side walls. Sheets of the appropriate size are cut from drywall and attached to the frame using self-tapping screws. Holes for the hinges are made on one of the side walls. Next, the boiler is installed and connected. At the last stage, the door is hung.

If you are going to improve the kitchen space and hide the gas boiler, you need to study the rules, regulations for installation and use. This is an important point on which your health and life depends.

I will focus on the main points:

1. Placement is carried out on the wall or floor.
2. The gap from the floor is 80–160 cm, from the ceiling - 80 cm.
3. The cabinet used for "camouflage" cannot be adjacent to the walls of the unit. Gaps are made on the sides - from 5 cm, in front - from 10 cm.
4. The room should have vents for ventilation.
5. The power of the domestic boiler is selected no more than 60 kW.
6. Installation and adjustment is performed only by specialists.
7. The distance to household appliances and the stove is at least 30 cm.
8. It is advisable to install sensors for warning of gas leaks.

It looks like a gas water heater without decor

The nuances of masking communications

The requirements for the installation of boilers also include the rules for connecting pipes to them - gas, water, smoke exhaust, and in the case of convection equipment and sewer.

As for the chimneys, they are removed vertically from atmospheric units with an open combustion chamber.And the coaxial chimneys of boilers with a closed burner - horizontally through the outer wall.

All other pipelines, especially gas ones, are strictly prohibited to be laid in grooves or closed with non-removable structures. They must be freely accessible at any time.

However, there are several ways to hide pipes from heating devices.

• Close with decorative boxes. They can be bought in a wide variety of designs, or you can make them yourself from scrap materials.

Decorative boxes made of perforated metal

Installation of a box made of veneered fiberboard

• Wrap in a plasterboard box and finish with the same material as the backsplash or adjacent walls. But the box must be removable, or hatches must be installed in it opposite the taps and valves.

The pipes will be accessed through a hatch in the box

• Build with the boiler into kitchen furniture. That is, to design the cabinets in this way, making holes in them in the bottom and side walls so that when the doors are open, access to the pipes is free.

The pencil case fits the equipment, the meter, and all the pipes

In apartments, wall-mounted models of boilers are most often installed, and in private houses - floor-standing ones. As for the first option, it is better not to hide the product, but to choose its color scheme for the overall interior.

For example, for modern high-tech trends, it is worth installing a product with a chrome body. And for classic interiors, such as country or Provence, equipment in white is suitable.

There are many different ways to decorate a gas boiler so that it performs its functions properly and does not spoil the interior:

1. It can be hidden in a kitchen cabinet. To do this, the back wall, lid and bottom are cut out from the furniture. And holes for ventilation are made in the side walls.
2. The boiler can be placed between the cabinets. To ensure safety, the side walls of the cabinets are covered with non-combustible materials.
3. To remove the boiler from view, you can hang it behind cabinets or a column.
4. If the layout of the room allows, the equipment can be hidden in a niche and the opening with blinds or curtains can be decorated.

You can install gas equipment in the following rooms:

• in the kitchen;
• in the basement;
• boiler room;
• hallway.

In the kitchen, you can install a unit with a capacity of up to 60 kW. If its capacity is more than this figure, a specially equipped room is needed, for example, an extension or a separate boiler room.

According to the current regulations, in the room where the heating equipment is installed, the following must:

• there are doors and opening windows;
• supply and exhaust ventilation is present;
• to be located sockets;
• comply with the requirements for the smoke exhaust system.

When decorating a gas appliance, it should be borne in mind that aesthetics here fades into the background.

To hide the boiler in a kitchen set, it is necessary to think over a competent furniture design. The whole difficulty of such decoration lies in the fastening of the boiler. Furniture items, in which the equipment will be hidden, must be made individually, since the standard models do not correspond to the dimensions of a specific heating equipment.

When designing a kitchen unit for a boiler, the following requirements are taken into account:

• there should be 3 cm ventilation gaps between the walls of the boiler and furniture items;
• when designing a furniture set, it is worth adding 3 cm to each side of the cabinet;
• for the cabinet in which the heating device will be mounted, it is better to choose a perforated facade.

Can the device be placed in the cabinet of a ready-made headset? If you can find the size of the finished kitchen set that suits you, you can hide the equipment on your own.

To do this, a hole is made in the cabinet lid for the chimney.The back wall in the closet can be removed - it is not needed. But the structure will need to be reinforced with side rails on which the upper and lower covers will be attached.

This decoration option is considered ideal for the kitchen space. After all, the boiler will practically not be visible, and it will not spoil the overall interior of the kitchen.

You can hide the heating boiler under drywall. This is a more affordable option. As for the method of assembling a drywall structure, you can:

We offer you to familiarize yourself with an Air purifier for dusting an apartment: which one is better to choose for allergy sufferers?

• assemble a frame from a metal profile on the wall;
• collect the product on the floor and attach it to the wall. In this case, holes are made in the wall for metal dowels, and the cabinet is attached to them.

Plasterboard sheets are attached to the finished cabinet frame, and only then the gas appliance is installed. After that, the doors are hung.

The easiest way is to choose a heating boiler for the overall interior. But, unfortunately, manufacturers produce products in white or chrome shades. If your kitchen is designed in light colors, then you can opt for a white case. It is advisable to choose the location of the unit in such a way that it is not conspicuous.

The easiest way to hide a floor-standing boiler is in the kitchen or in the living room in a furniture cabinet. Thus, you will decorate not only the heater, but all the pipes.

For owners of private houses, it is better to install the boiler not in the kitchen or hallway, but in a separate boiler room. And in a small apartment, the floor unit can be hidden under a decorative panel, folding tabletop, or under a windowsill.

According to norms and standards, it is prohibited to close the communications of gas equipment with non-removable structures. These communications should always have open access. Therefore, pipes can be hidden only with removable structures that do not block access to the shut-off valve.

Solving the issue with the camouflage of the case is half the battle. Communications emanating from the device spoil the interior of the kitchen no less than the boiler itself. Gas pipes, water hoses, bulky chimney are integral parts of the unit and remain visible.

You can decorate communications with a box. For this, a plastic of the required size is purchased or made independently from drywall. The second method has a more solid structure, which can later be glued with a decorative film or overlaid with tiles.

Chipboard box for pipes and hoses

The gas pipe is usually hidden by furniture and only a small part is visible between the shelf and the work table. This place is covered with chrome paint or decorated in any way described above.

Corner communication elements are successfully masked in different ways:

• artificial flowers;
• dummies of fruit;
• hinged panels;
• painted over to match the interior.

The boiler is completely hidden in the cabinet, and the communications go down or along the kitchen apron. This moment spoils the design - pipes and hoses need to be decorated.

In open places, a U-shaped plasterboard box is made, the front part of which is removable. The depth of such a channel is 2-3 cm, the width is 3-4 cm. Communications are placed in it and closed with a top panel.

In the pipe cabinet, you can make shelves for storing small items

Communications are closed with a decorative box with a removable panel

The valve should be in an easily accessible place. With all your decorative creations, it should take at least 10 seconds to access it, that is, open the door and turn off the gas.

Unlike wall-mounted boilers, floor-standing boilers are less aesthetic and have no design choice, so the owners want to hide them as best as possible. If the area of ​​the kitchen allows and there is a permit from the gas services, you can make masonry around the pipe.It looks pretty and modern enough.

You can hide the floor-standing boiler in a pencil case, made in the same design as the kitchen. Order it separately at the headset installation stage. He will also close the pipe with communications.

Typically, a floor-standing boiler is installed under a windowsill or in a corner. In this case, the front panel must be equipped with ventilation grilles.

Open gas pipes and valves do not look very nice. This can be corrected by placing them in a decorative cover. There are many options for these elements in hardware stores.

The second option is to make a drywall box. It is made according to the dimensions of pipes and other elements of the communication system. The outer walls of the boxes are made to match the color of the furniture or the walls of the kitchen.

When choosing the option of how to close the heating equipment, it should be remembered that the gas boiler and communications should remain freely accessible if they need to be repaired or checked for operating condition.

Many owners, both private cottages and apartments in multi-storey buildings, decide to disconnect from the heating plant and install autonomous heating. As a rule, a gas boiler is installed in the kitchen. An ordinary white unit can disrupt the interior of the room, so they think about how to fit the boiler into the existing design.

The design of the part of the room where the boiler is placed must be thought out before installing the heating device.

How to hide the cauldron:

• Homemade chipboard box for the boiler. Ideally, the front panel of the box should match as much as possible with the facade of the kitchen set.
• Niche made of profile and drywall. The front of the structure is also closed with a door to match the overall style of the kitchen.
• Finishing the boiler with foil or special paint.

Accommodation types

In a private house, there are many places for the installation of the unit hidden from the eyes. For the apartment there are restrictions on the method of placement, and the arrangement of the chimney pipe. Many, when purchasing gas heating equipment, wonder where to hang or put, depending on the type of model chosen.

They are produced in two types, such as:

• Floor.
• Wall.

Solution 2. We hide the boiler in the closet: decor techniques

Floor-standing AGV can be mounted in the corner of the kitchen according to the installation rules. It is also allowed to hide the floor-standing boiler in a pencil case, while observing the standards and safety rules.

If the gas boiler was installed after purchasing a kitchen unit, and there is no way to hide it in one of the existing cabinets, you can decorate it with a homemade door. To make a cabinet for a boiler with your own hands, you will need chipboard plates and wooden slats.

Before starting work, you need to accurately calculate the dimensions of the gas boiler. The minimum distance from either side of the boiler to the cabinet is 3 cm, respectively, add 6 cm to the height and width of the boiler and select a door of this size.

Progress:

1. From chipboard boards with a jigsaw, you need to cut the side walls of the cabinet, based on measurements. The depth should also be 3-4 cm deeper than the depth of the gas boiler.
2. Make holes in the lower wall for the water and gas supply pipes, in the upper one for the chimney.
3. Cut holes for furniture curtains on the right or left side with a crown.
4. Observing perpendicularity, fasten all sides of the cabinet together with bots. There should not be a back wall, instead of it, attach two strips parallel to each other from above and below.
5. Attach the fasteners to the kitchen wall on the fixed rails. Hang the cabinet door on the curtains.
6. Attach the resulting structure to the boiler and hang it on the wall.

A hinged boiler can be placed in the corner of the kitchen by installing it in a hinged corner cabinet or covered with the same homemade door. If you wish, you can leave the device open, disguise it with beautiful decor - stickers or decals.

Today, the most popular option for hiding communications is a box made of profiles and drywall, which can be tiled or pasted over with wallpaper. When installing the box, you should take a moisture-resistant drywall.

The gas pipe can be hidden behind the kitchen unit. In this case, cabinets and bedside tables should not put pressure on the pipe, you need to leave about 1 cm of free space between them. If the pipe runs at a height of more than 1 m from the floor, you can use it as a towel holder. To do this, the pipe is cleaned of rust and covered with several layers of chrome paint - after drying, you can hang towels and napkins on it.

Our current cauldron is tucked away in a fairly loose plasterboard niche that has no door. It was impossible to do otherwise, since this is equipment with an open combustion chamber.

Most likely, it will be necessary to refine the boiler with a closed burner and not just in the kitchen, but in the kitchen-living room. And here completely different standards apply.

Boiler in the kitchen-living room

But first things first.

General requirements

In general, the rules for installing gas boilers are regulated by SNiP 31-01-2003 and 31-02-2001. But I will try to express them in simple "human" language.

• There is one general rule: regardless of the type of equipment, it can only stand in rooms that, according to the current SNiP, are considered non-residential. The living room does not apply to them, so developers often bypass the ban, naming a kitchen combined with a living room, a kitchen-dining room. The dining room is non-residential.
• The presence of a door. The room in which the gas equipment is installed must be separated from the living rooms by a door. She, in turn, should not have a threshold so that air can circulate freely throughout the house. Or a special convection channel is built into it.

Ventilation grill in the door leaf or the gap between it and the floor - mandatory safety requirements

• The kitchen window should be equipped with a window for the same purpose - to ensure the circulation of air flows. With the advent of metal-plastic windows, gas services have become more loyal to their absence, if the window has a mechanism that allows you to open it for ventilation.

A window with a window or ventilation function in the kitchen must be mandatory

• Number of window openings. In order to ensure good natural lighting of the room with the boiler, at least 0.03 sq.m. must fall on each of its cubic meters. the area of ​​the window opening excluding frames and partitions.

We offer you to familiarize yourself with the Boiler on long burning sawdust

Convection equipment with an open combustion chamber can be installed in the kitchen, but it is undesirable - it is better in the boiler room. And hiding it, observing all safety requirements, will be problematic, if not impossible. Here the main document, which will have to be guided by, will be the instructions for the boiler.

Boiler diagram with an open burner

Picture	rules
To install the boiler, you need a sufficient kitchen area	Room area. Since the boiler needs air for combustion, which it takes from the room, the minimum kitchen area should be 9 square meters. m, and the ceiling height is 2.5 m.
Equipment with an open combustion chamber must not be deprived of free air access	Free air access. It is strictly forbidden to hide it in a cabinet or a closed niche, as this will restrict air access to the burner and create emergency operating conditions.
Chimney from the boiler with an open burner	Chimney device. Such equipment requires a vertical chimney with a pipe height sufficient to maintain the draft.
Separate hood required	Separate hood. In a kitchen with such a boiler, there must be a separate hood for it, which cannot be combined with a common hood - a separate channel is needed.
Ventilation scheme for a room with a boiler	Good air exchange. The air exchange in the room with the equipment operating should be at least 200 cubic meters / h.

Such heat generators are most often of the floor type, less often of the wall type. Both those and others do not look the best in the interior, unless the boiler is made in the techno or loft style. Therefore, you always really want to hide them somehow.

Not every unit is able to decorate the kitchen.

This can be done, but only on condition that the air flow to the equipment is unimpeded in the volumes specified by the manufacturer. As well as access to it for maintenance and repair. What are the possible options?

• This is painting, painting, decoupage, etc. There are many ways to modify and decorate it with your own hands. If you pick up a paint or pattern that goes well with your kitchen set, it can work out well.

Decorating options

• Decorative front panel. It is easier, but more expensive to buy a modern boiler from well-known manufacturers that produce models with a decorative front panel.

Boilers Navien with a picture

Photo printing on the door

Before ordering furniture in the kitchen with the intention of placing a boiler in one of the modules, carefully read the instructions for it again and get clarifications from the gas service employees.

Otherwise, there is a high probability that at the very first check you will be obliged to dismantle all this beauty. And this is even the best option. At worst ... well, you know what happens when gas appliances are misused.

The main requirements are:

• Providing air access, for which the cabinet is made without a bottom, lid, back wall and with "leaky" facades. It can be a perforated metal plate or a grill made of any materials, the design of which matches the style of the furniture;

Perforated fronts provide air access to the boiler

• The distance from the walls of the boiler to the walls of the cabinet and its facades must be certain, it is indicated in the technical documentation or established by employees of the regulatory authorities;
• Doors should be easy to open and, if necessary, removed, like the entire structure that covers the equipment;

Access to equipment is the most important condition for its disguise

• Providing fire safety is one of the main points. It is achieved by covering the inner walls of the box with fire-resistant materials.

It is good if there is a natural niche in the kitchen and the boiler is standing or hanging in it - it is not so striking. But you can do it yourself, using a metal frame and sheets of drywall.

Boiler in a niche

We did just that when we were deciding how to close the floor heating equipment. I will show you how it happened and how it happened, but I immediately apologize for the quality of the photos - they were not supposed to be shown to anyone.

Images	Description
	That's how it was in the beginning - everything is in plain sight.
	The plus is that the boiler is in the corner, it is easy to hide it.
	A frame made of metal profiles is assembled on self-tapping screws for metal.
Read also:  On the problems of accounting for heat energy and heat carriers in boiler houses, RTS and TPP	Here it is already covered with plasterboard and covered with wallpaper from the outside.
	From a different angle. The kitchen itself has the shape of the letter L, so you can't even see the niche from the entrance.
	On the other side of the partition, a refrigerator and a pencil case stood up.
	Now the cauldron can only be seen by going close to it. Therefore, we did not begin to design the opening in the niche in any way. But if you wish, you can close it with a lattice door or blinds, but they must always be kept with half-open slats.

What a disguised boiler looks like in the kitchen: photo

The best option for camouflaging a white unit is a kitchen unit wall cabinet. In this case, the proportions are maintained and the style of the interior is maintained.

How to choose a wardrobe

When purchasing furniture, you need to correlate the height and depth of the cabinet with the parameters of the boiler. In this case, the cabinet should be larger and not restrict air circulation.When planning a camouflage for a gas boiler, consider the main points:

• installation height;
• wiring of communications;
• the length of the hoses;
• the way they are laid;
• the ability to install a mounting box / channel.

Wiring, valve and connections must not be bricked up, they must be accessible

Cabinet installation

Kitchens with a gas boiler: design and installation of a chipboard cabinet

1. The boiler is purchased after purchasing a kitchen unit.
2. The design of the kitchen is being improved without purchasing new furniture.

In any case, your goal is to decorate the gas unit. The front part of the door is made as similar in color to the set as possible. If the boiler is located between two wall cabinets, you will need to fix a chipboard door on the profile, cover it with a foil or other finishing material.

To create a full-fledged cabinet, you will need wooden bars (25 * 40 mm), chipboard plates and tools, including a screwdriver, jigsaw. Measure the gas apparatus, draw a plan of the cabinet. The top and bottom are made 6 cm larger, and gaps of 6-10 cm are left in front and on the sides.

The wardrobe is made to order or built in independently

Rules and regulations to be observed

General requirements

The layout of the kitchen is carried out taking into account the requirements for the installation of gas heating equipment. The current regulatory documents determine:

1. The presence of a door separating the kitchen and other rooms.
2. Minimum requirements for window openings.
3. The presence of supply and exhaust ventilation.
4. Location of the socket, boiler pipes.
5. Requirements for the smoke exhaust system.

The interior of the kitchen with a gas boiler on the wall or floor must strictly comply with the current SNiP and sanitary standards. In case of gross violations identified, the representative of the Gas Industry has the right to turn off the gas supply and impose penalties.

We suggest that you familiarize yourself with How to close a heating battery in an apartment

When installing a gas boiler, the main thing should be compliance with the rules of safe operation. Aesthetic value is of secondary importance.

Requirements for the installation of gas heating boilers in the kitchen stipulate that the room must be fenced off from the corridor and living rooms with a door leaf. It is strictly forbidden to replace the door with an arch.

Doors in a kitchen with an installed gas boiler should not have a lower threshold for unhindered air circulation. Alternatively, it is possible to insert a convection duct covered with a decorative panel into the fabric.

The rules for placing a gas heating boiler in the kitchen, in particular, SP 54.13330, stipulate the need for a window opening with an installed window leaf. Strictly speaking, metal-plastic double-glazed windows with an opening window (without vents) are a violation of the norms. But, usually, representatives of the gas service do not pay attention to this.

A vent, like convection openings in the kitchen door, is necessary to ensure continuous circulation of air flows. If you want to integrate a gas boiler into kitchen furniture, it is important to carefully choose the location so that it matches the direction of the circulating air. Convection holes are also made in the facade of the furniture.

As practice shows, it is better to choose a boiler that can be hung on the wall. This facilitates the flow of air to the burner device. Even models with a closed combustion chamber, although in a smaller volume, still burn air from the room. Therefore, there are strict requirements for kitchen ventilation:

• It is forbidden to combine the hood for a gas boiler with a kitchen hood, according to the existing rules. The requirements stipulate the need for a separate channel.
• The calculation of the diameter of the ventilation duct, when installing the boiler in the kitchen, is carried out taking into account the performance of the heating equipment. The calculations are performed by specialists from the Ministry of Emergency Situations or a related organization.After calculating the diameter of the ventilation pipe, an act is drawn up on the compliance of the channels with the required parameters. Registration of the document is carried out in the Ministry of Emergency Situations.
• The rules for installing the hood take into account the required air exchange in the room. According to clause 9.2, SP 54.13330, a multiplicity equal to 1 m³ / hour 100 m³ / hour is taken into account with the heating equipment turned on. For atmospheric burners, double air exchange is taken into account. For heat generators with a closed combustion chamber, single.

A plasterboard ceiling or fire-resistant gypsum board is ideal. SNiP requirements permit the use of any kind of non-combustible material. At the same time, the recommended height from the floor on which the gas boiler is hung in the kitchen is from 80 to 160 cm, and the minimum gap between the boiler body and the ceiling is 80 cm.

According to this rule, it is not recommended to make a stretch ceiling in the kitchen if it is planned to install gas-fired boiler equipment. The use of plastic panels is prohibited. It is recommended to use gypsum and cement-sand plasters with subsequent painting of the surface.

The distance from the gas heating equipment to the outlet is stipulated in the instruction manual. This requirement is monitored by the Gaznadzor authorities. The electrical outlet for the boiler is mounted no closer than 1 m.

Another requirement is the correct location of the refrigerator in the kitchen, relative to gas heaters. The minimum distance must be at least 30 cm. The gap is required for boiler maintenance.

Individual house in the private sector, different from city standards. Installation requires compliance with certain rules and regulations. Get to know the most important regulations:

1. The height of the ceiling where the gas boiler works must be 2.5 m and higher.
2. Installation space - at least 4 sq. m.
3. If the installation is carried out on a wooden wall, sheathing with metal sheet is required.
4. Adjustment and start-up is carried out by gas masters.
5. Distance from the meter - from 1.6 m.
6. If the ignition occurs from electricity, the socket is located at an interval of 1 m.
7. The chimney is run with good ventilation.

Utilities are closed by a removable tile panel
Gas boilers are not simple devices and require compliance with certain installation rules. First of all, its installation requires a permit from the gas services. When the equipment is in good order and the chimney is clean, then there should be no problems. Further, if you do not want problems with the governing bodies, you must adhere to the following rules:

• gas boilers are installed only in non-residential premises, which is the kitchen;
• ventilation is required;
• the kitchen should be fenced from other rooms with doors;
• there must be at least one window in the room;
• finishing, in particular the ceiling, must be made of non-combustible materials. It is forbidden to use a gas boiler with stretch ceilings, because if they catch fire, additional harmful vapors may occur;
• when installing the boiler between the cabinets, you need to provide space for free air circulation;
• if the floors in the house are wooden, then the wall behind the boiler is closed with a sheet of metal.

Also, the standards for the distances between the boiler and kitchen items are observed:

• from the boiler to the floor - 80-160 cm, from the ceiling - 80 cm;
• from the walls of the "camouflage box" on the sides - at least 5 cm, in front - from 10 cm. The boiler in the cabinet must be closed with a door with a grate;
• to household appliances and stove - at least 30 cm;
• from the counter must be placed in the range of 1.6 m or more;
• the socket for connecting the device is located at a distance of 1 m.

You can hide the gas boiler in the kitchen, but do not forget about the norms

The room in which the boiler will be installed must be at least 4 m2, ceiling height from 2.5 m.The power of the gas appliance is selected no more than 60 kW and it is advisable to install sensors to alert about a gas leak.

Placing a gas boiler in the kitchen requires certain rules and regulations. Failure to do so can lead to serious consequences. The room in which the gas boiler is installed must be at least 4 square meters, more than 2.5 m high, have a window and a door to the corridor. There must be a device in the kitchen that will notify you of a gas leak.

The power of gas boilers that are installed in the kitchen should not exceed 60 kW. The heating boiler can be installed on the floor or attached to the wall.

Kitchen combined with living room

The installation of boilers in a residential area is prohibited. The living room is directly related to this prescription. Failure to comply with sanitary standards and safety rules is punishable by law.

The kitchen and dining room does not fit into this category. Therefore, in a private house, when agreeing on a development plan, the word living room should be absent. The kitchen-dining room should have a window with a window and exhaust ventilation equipment. A prerequisite for placing the boiler is the installation of a door that separates the room from the corridor and living rooms.

Video advice for masking a gas boiler

Boilers with an open burner and 3 options for their decor

Often, a gas unit is installed in the kitchen in the corner. Nearby is the headset hinged shelf.

In this case, an extension is made to the locker. A frame is created on which a purchased door is hung. You just need to choose the right fittings and door facade.

There is no ceiling and bottom for this design. This will ensure good air circulation and drainage of communications. There is a second option - the column cabinet reaches the table top, the pipes do not need to be decorated.

A narrow pencil case is installed between the column and the wall cabinet

The boiler in the corner is the most convenient location. If it is located between two hinged kitchen cabinets, then a frameless structure is created. The masking door is attached to a bar nailed to an adjacent cabinet.

The heating system of private houses can run on natural gas. Parapet boiler belongs to the group of individual heating systems. The compact device can be installed anywhere, in compliance with safety rules.

According to the instructions, it is installed on the street, 3 m from the house or on a wall with a gap of 30 cm. If you installed it in a room, then there should be no curtains, upholstered furniture and combustible materials nearby.

The large ventilation pipe and pipes leading to the batteries can be disguised by removing them in the chipboard boxes. It is advisable to leave the unit itself open, as combustion occurs in it and air access is required.

Photo	Description
	Option 1 The boiler is installed in a niche that can be closed with a grating screen. Heating pipes remain open
	Option 2 When installing a small boiler in a room, all piping and communications are encased in the walls. The connections remain open.
	Option 3 With an angular arrangement, you can mask the boiler with a side cabinet for supply.
	Option 4 A powerful boiler, designed to heat the entire house, is installed in the utility room.

Despite the heating of the appliance, some owners hide the parapet boiler in the furniture. In this case, a design is made that allows you to easily get to the valves and the control panel. A household fan is installed in a cabinet with a gas unit to improve the circulation of air masses.

A custom-made cabinet-pencil case allows you to disguise the gas installation along with connections and pipes. There is also a place for placing kitchen utensils. Craftsmen make such a pencil case on their own.

The pencil case has several doors

When creating a cabinet, the following conditions are met:

• the presence of air circulation;
• structural stability;
• easy access for maintenance;
• if necessary, the possibility of dismantling.

The front part of the tall cabinet is not divided by two vertical doors. If desired, two draw-out boxes are mounted below. In small rooms, wide facades are divided into double-leaf doors.

The pencil case hides the gas water heater and communications

General requirements

Varieties of gas heating equipment

Modern industry produces a fairly wide variety of types of equipment for equipping a gas boiler house or for installation in any other non-residential premises, which allows users of such devices to optimally select them in full accordance with their requirements and financial capabilities. So, depending on a number of parameters, boilers can be:

• single-circuit or double-circuit type;
• with a closed or open combustion chamber;
• equipped with various ignition systems;
• with a boiler for heating water of external or internal type;
• floor-mounted or wall-mounted.

In addition, of course, heating appliances for the kitchen differ in their power.

Differences between single and double-circuit gas boilers

Single-circuit and double-circuit boilers for the kitchen differ not only in the number of circuits in their design, but also in functionality. So, a single-circuit type technique can be used only for heating, and a double-circuit gas boiler can also be used to heat water for domestic and household needs. Meanwhile, if you equip a single-circuit boiler with an external boiler, then it can also be used to heat water for hot water supply in the kitchen.

Gas boilers with closed and open combustion chambers

The air in boilers with an open combustion chamber comes directly from the kitchen, and the exhaust gases escape naturally through the chimney. Installing a boiler of this type in the kitchen is not the best option, since when it works in the kitchen, the amount of air decreases, which is especially critical if the volume of the room is small. Boilers with a closed combustion chamber operate on a slightly different principle, the air into which is supplied from the street through a special coaxial chimney and the gases formed during the combustion process are discharged through it. The installation site of a boiler with a closed combustion chamber can even be small kitchens (6–8 m 2), where they can be installed inside kitchen furniture cabinets.

Differences in gas boilers by type of ignition

Heating devices, depending on the model, can be equipped with automatic and manual ignition systems. In devices of the first type, the burner automatically turns on at the moment when gas begins to flow into it, and when using the type with manual ignition, accordingly, this process will have to be carried out independently, using matches or a lighter.

Gas boilers with external and built-in boilers

Naturally, it is much more convenient when, together with a gas boiler, a boiler is used, in which water is heated, intended to satisfy domestic and household needs. Such boilers for the kitchen, as mentioned above, can be external and built into the boiler itself. Devices with built-in boilers are compact in size, such options are easier to install, but the volume of the tank that is built into them is quite small. Almost anything can be the volume of the tank for boilers with an external boiler, but such devices, which should be taken into account when choosing them, take up more space, and in order to carry out their installation, it will be necessary to equip additional communications.

Read also: Rug flowers photo perennial