Belt heaters are another type of heating devices, the principle of which is based on the emission of infrared waves that heat not the transit medium, but the objects they reach - waves, "resting" on the surface of the object, cause its molecules to vibrate, as a result of which the object heats up.
They have been used relatively recently, so they have not yet received widespread distribution, but due to their high technical characteristics, they are a promising direction in solving the problem of heating in everyday life and at work.
Let's take a closer look at what tape heaters are, their structure, characteristics and functionality.
What is a tape heater (ENGL)
The problem of technological heating of equipment, tanks, pipelines and premises has existed for a long time, especially in the conditions of northern latitudes. To solve this problem, it was necessary to develop an electric flexible heating element (ELH) - a safe device that can be laid on the surface of heated equipment, repeating its profile. The first step in solving the problem was the creation of electric heating cables with a conductor made of a material of a given resistance, which, passing a current through them, convert electrical energy into thermal energy.
Cable heaters are still used in everyday life and in industry, but a more perfect device for heating is the next step in solving the heating problem - ENGL, a heating flexible tape element consisting of several cables arranged in a tape. In fact, ENGL is an improved version of the cable heater,
Specifications
The system of automatic electric heating of fuel oil provides optimal temperature conditions for transportation and combustion of fuel oil supplied to the boiler burners. NSP heaters used in this system have the most optimal thermophysical parameters for heating viscous and solidifying oil products and significantly surpass in technical, economic and operational parameters, electric heaters based on nichrome.
The electric heating system includes:
- Heaters NSP
- Flexible tape electric heaters LUNG
- Temperature control and regulation cabinet
Fiberglass heaters NSP are mounted on the bottom of the tank in the fuel oil extraction zone. LUNG electric tape heaters are wound on a fuel oil pipeline and then insulated. This ensures the maximum degree of economic efficiency of electrical heating A temperature regulator sensor DT1 is installed in the tank in the fuel oil take-off zone.
When the boiler room is started, the fuel oil is heated in the extraction zone from the tank to a temperature of 60 ° C. Then the fuel oil from the tank is fed into a preheated fuel oil pipeline, where the temperature of the fuel oil, as it is transported to the burners, is brought to 90 ... 120 ° C. Digital temperature regulators built into the control cabinet automatically maintain the temperature of the fuel oil in the tank and at the inlet to the boiler burner at the set value and allow its operational visual control.
Flexible materials: Cable holder. Types and device. Application and features
The device and components of the tape heater
ENGL is a woven glass-fiber tape (base), in the middle of which several heating threads made of an alloy with high resistivity (nichrome - nickel with chromium) are located parallel to each other. Outside, the tape is covered with a waterproof shell made of silicone rubber, which is also used to crimp the ends of the ENGL. The tape heater is connected to the network through an electric wire coming out of the end crimping, which is connected in a tape with heating threads.
According to the type of mains voltage consumed, heating tapes are produced for 12, 220 and 380 V.
The main element of the tape heater, which determines its characteristics, is the heating cable, from which the rows are made up inside the tape. To get a better idea of the characteristics of ENGL, consider the types of cables that are used for heating.
Heating cables
According to the principle of operation, heating cables are divided into:
- resistive - with a fixed power and a heating core as a heat source, placed in a 3-layer shell (electrical insulation, shielding braid and UV protection);
- self-regulating - two parallel conductors (phase and zero) at a distance of 1 cm with a heat source located between them - a matrix that heats up when current passes through it from the phase wire to zero.
A single-core cable has only one heating core, so both ends must be connected to the network (the turns of such a cable must be positioned so that the far end returns to the starting point, and both cable contacts are next to each other);
A two-core cable consists of a heating and a conductive core, the currents in which flow in different directions - the negative factors of the magnetic fields of the wires compensate each other (a two-core cable is connected to the network from one end, a special sleeve is installed at the other end);
Market Review
Belt systems have several varieties, which differ in their technical features and manufacturing technology. Among them are:
Multi-core heaters
This material is a tape of glass thread, on which several rows of wire (from 2 to 
from a material with high resistance, most often - nichrome, filled with an organosilicate composite. Typically, this type is equipped with low temperature leads either at both ends of the tape, or at one of them (for connection to the power supply).
Since the connections are made using high-tech factory methods, the tape sections have a fixed length. Their bending radius should not be less than 20 mm. Additionally, a thermostat is installed in the system, which limits the degree of heating of the cable for heating pipes.
Belt installation scheme - linear and spiral
Self-adjusting tape
Self-regulating tape for heating pipes consists of two parallel copper conductors, between which there is a material that changes its resistance depending on the temperature. All this is enclosed in an outer armor shell.
The advantage of a self-regulating cable for heating pipes is that there is no need for additional temperature sensors and regulating devices - the tape itself reacts to changes in the ambient temperature.
Also, its advantages include the simplicity of the device, which makes it possible to sell it in bobbins, or even by footage. It connects to the network through conventional control devices.
Important information! When installing the heating tape with a spiral method, overlap the edges of the material should be avoided - this leads to its overheating
Infrared tape (film)
The newest and most promising of this class of materials.This heating tape for pipes is in the form of a conductive polymer film based on a carbon composition with the inclusion of a copper wire. Its principle of operation is based on the transmission of infrared radiation directly to the heated surface.
Requires the installation of thermal sensors (on the surface of the film) and thermostats (in the places where power is supplied). The outside is closed with a special layer of thermal insulation. Available in rolls of various lengths.
Characteristics
To systematize and simplify the selection of the desired device from a variety of types of tape heaters, the following characteristics are used:
- symbol;
- connection type
- heater type;
- resistance (Ohm);
- active part length (m);
- width x thickness or diameter (mm);
- length of low-temperature wires (m);
- minimum bending radius (mm);
- weight (kg);
- rated voltage (V);
- heat power (W / m);
- power consumption (W);
- surface temperature (oС).
These characteristics are used when calculating heating systems required to ensure the process or operating temperature of pipelines, equipment and premises.
Main characteristics:
| LT-1 | LT-2 | |
| Standard belt width, mm | 40, 75, 135 | 15, 20, 45, 150 |
| Surface density, g / m2 | 165± 35 | 290± 50 |
| Breaking load for 2 cm width, N, not less | 200 | 300 |
| Permissible heating temperature in air, C | 400 | 400 |
| Permissible heating temperature in vacuum, C | 3000 | 3000 |
| Thickness, mm | 0,2 – 0,25 | 0,35 – 0,4 |
| Textile structure | twill 2/2 | twill 2/2 |
Household band heaters
In the conditions of frosty winters, communications (water supply, sewerage) of private houses, country houses, rural housing have always needed protection. For this purpose, highways and units located in basements, basements and attics were insulated with heat-insulating materials, and pipes buried in the ground were laid below the freezing mark. With the advent of tape heaters, the solution to this problem has been greatly simplified - pipes, shut-off valves and units began to be protected from defrosting by means of a cable or electrical tape heating device.
In this case, the method of placing the tape or cable allows you to vary with the degree of heating and material consumption. If the goal is to protect the water supply system from defrosting, then the tape can be run linearly along the pipe. If you plan to get water at room temperature at the outlet, then you can insulate the pipe by placing the heating strip with a snake, or equip the water supply system over the linear arrangement of the tape with a layer of heat-insulating material.
More accurate results can be achieved by using a thermostat with the band heater.
The sewerage system of private buildings also needs protection from frost, but excessive heating of the highway is useless here. Therefore, sewer pipes are equipped with tape heaters located linearly on the system, and a layer of thermal insulation with a protective casing is mounted on top of the sewer.
The use of tape and cable heaters for the installation of icing systems on the roofs of private houses is gaining popularity in order to prevent the dangerous formation of ice in gutters and icicles.
Important! It should be remembered that the use of resistive heaters for the installation of the icing system is impractical, since they are sensitive to the overlap of the cable or tape, when one turn lies on the other, and the accumulation of foliage on them - in these places the system quickly burns out.
Belt heaters are also used in greenhouses, since creating the required temperature and air humidity in them is not enough for growing thermophilic crops - soil heating is necessary. In this case, the heating system is arranged on a specially made preparation of the base - a heat-insulating layer, on top of which sand filling is performed and leveled horizontally.A layer of sand is repeated on top of the laid heating tape, then the base is covered with a reinforcing steel mesh and a layer of fertile soil. In this case, laying a resistive tape is also impractical - a self-regulating one is required.
Band heaters have found their application in automotive engineering, since the operation of vehicles in winter is significantly difficult due to thickening of engine oil and diesel fuel.
Important! Carrying out heating of units and highways of a car should be carried out only with tape heaters designed for an on-board network of 12 V and, according to the manufacturer's instructions for use, intended specifically for a given type of engine (gasoline or diesel) and a certain unit.
The operating instructions for the car strip heater also say whether the independent installation of this device on the car is allowed, or whether it should be done in a specialized car service.
Taking into account the fulfillment of these requirements, the band heater can be heated:
- salon;
- crankcase;
- for diesel engine: fuel filter;
- fuel line;
- fuel tank outside at the location of the pump;
- diesel canister;
- water separation sedimentation tanks;
- rechargeable battery.
The use of tape heaters in industry is no less widespread; they are used to heat tanks with non-combustible liquids, process and main pipelines, pipeline and pumping equipment, valves, etc. The list of technical means that require technological or preheating during operation is very large.
Installation of industrial devices is carried out by specialized organizations on the basis of design data, calculated taking into account all available factors.
How is the power calculation carried out
To select the most optimal power and length of the tape heater, the following parameters will need to be taken into account:
- Pipeline diameter.
- The depth of its laying.
- The temperature difference between the walls of the line and the environment.
- The length of the area requiring heating.
- The type and thickness of the thermal insulation layer.
- Used type of tape heater and features of its operation.
Strengthening the thermal insulation layer creates a natural protection of communication from heat loss: this allows you to save on the length and power of the heating tape.
These pipe heaters can operate in two modes:
- Continuous... With its help, the coolant inside the pipe is maintained at a given temperature tone. This is mainly true for hot water supply.
- Periodic... In this case, the heater is turned on only if the temperature in the mains falls below the set level.
Despite the comparative novelty of the very idea of active heating of pipelines, the use of cables is considered a thing of the past. In this respect, the heating tape for pipes is recognized as a more promising solution with a very good future.
Advantages and disadvantages
There are many positive characteristics of tape heaters, we will list the main ones:
- profitability;
- ease of installation;
- radiation wavelength in a harmless range;
- the ability to select devices with a safe surface temperature.
However, there are also disadvantages:
- sensitivity of resistive devices to external influences (overlap, intersection);
- the need to use thermostats with resistive tapes;
- high price of more advanced self-adjusting belts.
Flexible carbon heating tape LUNG
Flexible carbon heating tape (LUNG) is designed for heating pipelines, technological equipment with flat surfaces and complex geometric shapes, as well as for installation in electric heating products as a heating element.
Scope of application of the tape LUNG
- Heating of pipelines for pumping bitumen.
- Heating up of fuel oil pipelines and regulation of fuel oil temperature in front of boiler burners in boiler houses and CHPPs. "Soft" heating and maintaining the temperature of various chemical materials in product pipelines. LUNG tape is wound on pipelines with a specified calculated pitch of winding; it is recommended to lay a non-combustible heat-insulating coating on top of it.
- Heating of surfaces, for example, construction formwork, drying chambers. LUNG tape is glued to flat surfaces using heat-resistant silicone glue.
- Creation of flexible heating panels of various sizes by gluing LUNG tapes on metal sheets. With such mobile heating sections, it is possible to heat tanks, including railway tanks.
- Integration into rigid casings to obtain convective space heaters operating in a mild temperature regime without burning out oxygen in the air.
- Use in air heaters, air ducts for heating the air flow with minimal aerodynamic resistance and non-inertia heating.
LUNG belt operating conditions
- All surfaces on which the LUNG tape is mounted must be cleaned of burrs and sharp edges in order to avoid mechanical damage to the tape.
- Do not place flammable materials and products near the tape.
- During operation, it is not allowed to use tapes without a thermostat if heating to a temperature exceeding 250 ° C is possible.
- It is allowed to cover one side of the LUNG tape with a non-combustible heat-insulating material.
- It is allowed to bend the LUNG tape with a radius of at least 5mm.
- To obtain the best results in electrical and fire safety, it is recommended to use an RCD as a protective element.
Flexible materials: Flexible tubing: flexible water pipes, plastic plumbing
LUNG tape design
The LUNG tape contains a heating element made of a fibrous carbon material, an electrical insulating cover made of fiberglass, duplicated with a layer of silicone material. Low-temperature leads connected to the heating element are made of copper wire in heat-resistant insulation and are used to connect the supply voltage to the tape. The heating element and end fittings are sealed for environmental protection.
LUNG tape is produced according to TU 3443-001-10829030-07. LUNG tape is protected by a patent of the Russian Federation.
It is possible to manufacture LUNG shorter than 5 meters. In this case, the connection to the power supply can be done in two ways. The first method is to connect LUNGs in series with each other up to a length of at least 5 meters. The second way is to connect each LUNG shorter than 5 meters to the power supply through the LATR, with a voltage supplied to the LUNG, giving the consumed current no more than 3-3.5A.
The main advantages of the LUNG tape
- Large heating surface.
- Elasticity and flexibility.
- Small thickness and light weight.
- Low thermal inertia.
- Wide range of power density (up to 250 W / m tape length).
- Supply voltage from 0 to 220V (technical parameters of LUNG heating tapes for individual use are agreed upon with the customer).
- Ease of design and installation on equipment.
- Possibility of tape mounting at temperatures up to –60 ° C.
Prices for heating greenhouses Sadovy Expert
| Name | Specific power, W / m | Rated power, kW | Price, rub |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK 220V), built-in thermostat | |||
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.18 / 220-4.0) | 45 | 0,18 | 2 874 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.18 / 220-6.0) | 30 | 0,18 | 3 269 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.36 / 220-8.0) | 45 | 0,36 | 3 995 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.29 / 220-10.0) | 29 | 0,29 | 4 929 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.51 / 220-12.0) | 43 | 0,51 | 5 653 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.44 / 220-14.0) | 31 | 0,44 | 6 376 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.73 / 220-16.0) | 46 | 0,73 | 7 088 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.65 / 220-18.0) | 36 | 0,65 | 7 812 |
| Heating of the greenhouse "Garden Expert" (ENGL-1-TK-0.58 / 220-20.0) | 29 | 0,58 | 8 535 |
