It is not so easy to keep comfort and warmth in the house, especially in our country, known for its harsh climate. It is not surprising that on cold winter days more and more people complain about the freezing of the walls in the apartment and the formation of condensation on them. Unfortunately, the reason for such inconvenience lies in the fact that low-quality, cheap materials were initially selected during the construction of your house. Even in houses built conscientiously back in Soviet times, it is impossible to hide from the bad weather, since their thermal insulation has simply lost its properties over the years.
Local repairs in this matter are unable to provide the desired effect. In addition, you cannot do it yourself, you need to get the approval of the management company, with which, as you know, it is almost impossible to agree.
Akterm Anti-condensation
The material prevents the formation of condensation on all types of surfaces, including concrete, brick, metal. The scope is wide:
- interior work in the room (walls, ceiling, floor);
- containers, tanks;
- pipelines;
- metal structures;
- outbuildings - garages, cellars, cellars.
The application of 2 mm paint 100% guarantees the absence of condensation during the operation of surfaces in the temperature range of -60 ... + 150 degrees. Indoors, this helps to create a comfortable microclimate, provide protection against mildew and mold.
The material is diluted with water, can be easily applied with a brush, airless spray. Drying time - 24 hours.
Is it possible to insulate an apartment on your own using familiar materials for thermal insulation
According to the set of rules SP 23-101-2004 "Designing thermal protection of buildings", it is recommended to carry out all work on building insulation using traditional materials directly from the outside of the building. The fact is that the meeting of warm and cold streams occurs directly at the point where the insulation is bordered by the wall, which causes condensation, and, as a result, almost one hundred percent loss of thermal insulation. Thus, it is impossible to work with ordinary heaters from the inside.
Akterm Standard
It is a universal liquid heat-insulating material, most in demand in everyday life and at work. The paint is suitable for all types of surfaces, even plastered ones. Can be used for:
- insulation of internal and external surfaces in apartments, houses, on balconies and loggias;
- hydro and noise insulation of any structures;
- protection against UV radiation, other atmospheric factors;
- handling of transport, containers, pipes, metal structures.
"Akterm Standard" is sold in convenient packages of 5.10.20 liters, its consumption does not exceed 1 liter / sq. m of surface. Application of paint is standard - by spray or brush.
Actor Metal
Liquid ultra-thin insulation "Akterm Metal" is specially designed for thermal insulation of metal substrates. perfectly protects surfaces from aggressive factors - sunlight, wind, moisture. A unique property of the paint is protection against burns in contact with heated metal. Due to the environmental friendliness of the composition, the material is widely used inside production facilities and workshops. Other possibilities of operation:
- steam pipelines;
- hot and cold pipelines;
- tanks and hangars;
- storage facilities and cold storage facilities;
- air conditioning systems;
- trailers and refrigerators.
In addition to metal, paint will help protect glass and plastic surfaces from damage and heat loss. The minimum layer of material is 1 mm, the peak application temperature is +260 degrees for 2 hours.
Precautions
Before using the material, read the instructions for it printed on the plastic container in which it is located. This is necessary in order to cope with the task of applying the product in the shortest possible time and with maximum efficiency. We also recommend that you prepare special clothing for the operation of AKTERM Concrete in advance, so as not to allow unnecessary contact with open skin. However, even if contact occurs, nothing threatens your health. Just wash the contaminated body surface with warm water and soap, and moisturize it afterwards with a simple cream.
Akterm (Facade) Concrete
Liquid insulation is designed to insulate and decorate the facades of buildings, structures and premises from the inside. It is ideal for surfaces made of bricks, concrete and other materials. Thanks to antifungal additives, you do not have to worry about removing mold - its appearance is excluded. The antiseptic additives included in the composition eliminate harmful bacteria, which helps to improve the indoor climate.
The heat-insulating layer will also protect against freezing and condensation of moisture on the walls. The product will retain its attractive appearance for a long time, because it is resistant to UV radiation. After drying, the paint does not require additional processing, it is used for:
- insulation of premises from the inside;
- floor insulation under the screed;
- insulation of loggias, balconies, basements;
- as a vapor barrier for underfloor heating;
- insulation of facades of residential and industrial buildings and structures;
- elimination of condensate, fungus;
- thermal insulation of surfaces of household and industrial facilities;
- thermal insulation of children's rooms, schools, hospitals and other social services. institutions;
- thermal insulation of interpanel seams, facades;
- protection of walls, floors from freezing;
- insulation and insulation of window slopes.
The operating temperature of the finished coating is not as high as that of the previous materials - up to +140 degrees. The color of the film is white, the paint can be applied manually or mechanically.
Advantages of thermal insulation material Akterm
Environmental friendliness. In addition to all other advantages, liquid ceramic thermal insulation is a completely environmentally friendly material; after complete drying, it does not emit any harmful substances into the environment.
Low thermal conductivity. In appearance, Actor resembles the most common paint. Its consistency allows you to apply thermal insulation to any surface, regardless of their shape. After applying Akterm, a highly elastic coating is formed, which consists of evacuated microspheres, after its application, the treated surface is, as it were, contained in a kind of thermos.
Areas of use. Liquid thermal insulation can be used for insulating water pipes or heating pipes, as well as insulating roofs, building facades and eliminating freezing of concrete floors, walls, various tanks and containers, vehicles, as well as highly efficient condensate removal. Liquid thermal insulation can be applied to surfaces made of any material, it is also possible to apply it in rooms with suspended humidity and even on hot pipes. For application on surfaces with a temperature of more than 90 ° C, the thermal insulation must be brought with water to the consistency of sour cream. It is also possible to apply heat-insulating material on surfaces with strong manifestations of corrosion; for this, it is necessary to pre-treat with a rust-converting agent.
More recently, it was very problematic to acquire this miracle of the paint and varnish industry, now it will not be difficult to buy liquid thermal insulation in Tyumen.
Actorm Nord
A universal heat paint for application at low temperatures down to -35 degrees, it is used on all types of substrates, and the addition of special components gives exceptional frost resistance and anti-corrosion properties. "Akterm Nord" is intended for outdoor use, as it includes a number of solvents. The heat-insulating layer easily tolerates even the most severe winters, therefore the scope of the paint:
- insulation of residential and non-residential buildings and structures;
- insulation of the outer part of the building object: facades, interpanel seams, roofs;
- vehicles;
- containers, cisterns, reservoirs;
- household and industrial pipelines;
- insulation and anti-corrosion protection of metal structures;
- hangars, garages, warehouses;
- thermal protection of vehicles, containers.
The product has excellent adhesion to concrete, wood, brick, and plastered surfaces. Its consumption is higher than that of other materials in the line - 1.2 l / sq. m. Apply by brush or airless spray.
Features of liquid thermal insulation Akterm
Ultrathin thermal insulation is a composite material that consists of a polymer matrix and a filler, which are multilevel evacuated microspheres, as well as a high-quality acrylic binder with a white color. The composition of thermal insulation also includes antifungal and anti-corrosion additives, which completely exclude the development of fungus on the walls and the appearance of rust on metal surfaces.
In the process of polymerization of liquid thermal insulation, a coating is formed, which acts as a "thermal mirror", which is a stable temperature barrier. Low thermal conductivity of the coating is achieved by a high degree of filling the material with multilevel microspheres, which are filled with rarefied air, and they provide excellent heat retention.
Actor Volcano
Unlike the previous paint, the liquid ultra-thin insulation "Akterm Vulkan" is a high-temperature modification of insulation, including organosilicon additives. The paint is applied to metal and brick substrates. Its distinctive feature is protection against scalding when in contact with a hot surface. The scope of the tool is as follows:
- heat pipelines in everyday life and industry;
- chimneys;
- product pipelines;
- engine parts;
- transport and ship hulls;
- roofing and metal structures.
Thermal insulation can be used on any substrates exposed to heating up to +450 degrees, as well as to the influence of aggressive substances: petrochemicals, salts, oils. For a short time, exposure to temperatures up to +600 degrees is allowed. The paint is applied with a brush, foam roller, pneumatic spray. It is recommended to apply 2-3 layers of coating.
Thermal insulation of industrial premises
The operating temperature of ultra-thin liquid thermal insulation is from -60 C to + 600 C. The service life is from 15 years and more. Liquid thermal insulation belongs to the latest thermal insulation materials, which is ideal for thermal insulation of walls (floor, ceiling), roofs, all types of pipes and heat pipes, hangars, garages, warehouses, refrigerators, etc. Liquid insulation: AKTERM is a paint-like material that can be applied to any surface. Liquid insulation is lightweight and can be easily applied to any surface. Non-toxic, safe! The use of AKTERM liquid thermal insulation means saving your money, warmth, comfort and a guarantee of energy saving in your home.
Thermal insulation of pipes, containers, containers, brick walls from the inside, as well as residential buildings and other premises with the help of AKTERM can be performed both in summer and in winter.
Akterm NG - non-flammable paint
Liquid insulation "Akterm NG" has the qualities of paint modification "Standard" and corresponds to the class of flammability NG (KM0).Recommended for use at facilities requiring increased fire safety measures. The paint has high adhesion rates to surfaces made of concrete, brick, wood, metal, and can be used as a finishing layer for the purpose of fire protection. "Akterm NG" is applied in a standard way - with a brush or pneumatic spray. It is sold in containers of 10-20 kg, the consumption is increased - 1.2 l / sq. m. After drying, the operating temperature is from -60 to +200 degrees.
Specifications:
Heaters Liquid insulation
- thermal conductivity - 0.0012 W / m ° С (calculated value);
- heat transfer - 2.4 W / m ° С;
- vapor permeability - 0.02 mg / m h Pa;
- water absorption - 2% by volume in 24 hours;
- application temperature (depending on the brand) - from -20 ° С to + 150 ° С;
- operating temperature - from -60 ° С to + 250 ° С;
- minimum service life of at least 10 years (data for a temperate climate on concrete and metal coatings);
- adhesion by pull-off force: to steel 1.1 MPa
- to concrete 1.12 MPa
- to brick surface 1.89 MPa
